This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
INVOLUTE SPLINES, SERRATIONS, AND INSPECTION
- Ground Vehicle Standard
- J498B_196507
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Recommended Content
Aerospace Standard | Involute Splines; Wear Limit, Definition Of |
Technical Paper | Stamping and Welding Experience with Ultra High Strength Steels for Automotive Body Applications |
Aerospace Material Specification | Radiographic Inspection |
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
TABLE 1 | BASIC TOOTH DIMENSIONS FOR SPLINES | |
TABLE 2 | TOLERANCES FOR INTERNAL AND EXTERNAL SPLINES — TEN THOUSANDTHS (20 = 0.0020) | |
TABLE 2 | TOLERANCES FOR INTERNAL AND EXTERNAL SPLINES — TEN THOUSANDTHS (20 = 0.0020) | |
TABLE 3 | EFFECTIVE CLEARANCES FOR SPLINES—TEN THOUSANDTHS (20 = 0.0020) | |
TABLE 5 | FLAT ROOT SIDE FIT—2.5/5 PITCH | |
TABLE 6 | FLAT ROOT SIDE FIT—3/6 PITCH | |
TABLE 7 | FLAT ROOT SIDE FIT—4/8 PITCH | |
TABLE 8 | FLAT ROOT SIDE FIT—5/10 PITCH | |
TABLE 9 | FLAT ROOT SIDE FIT—6/12 PITCH | |
TABLE 10 | FLAT ROOT SIDE FIT—8/16 PITCH | |
TABLE 11 | FLAT ROOT SIDE FIT—10/20 PITCH | |
TABLE 12 | FLAT ROOT SIDE FIT—12/24 PITCH | |
TABLE 13 | FLAT ROOT SIDE FIT—16/32 PITCH | |
TABLE 14 | FLAT ROOT SIDE FIT—20/40 PITCH | |
TABLE 15 | FLAT ROOT SIDE FIT—24/48 PITCH | |
TABLE 16 | FLAT ROOT SIDE FIT—32/64 PITCH | |
TABLE 17 | FLAT ROOT MAJOR DIAMETER FIT—3/6 PITCH | |
TABLE 18 | FLAT ROOT MAJOR DIAMETER FIT—4/8 PITCH | |
TABLE 19 | FLAT ROOT MAJOR DIAMETER FIT—5/10 PITCH | |
TABLE 20 | FLAT ROOT MAJOR DIAMETER FIT—6/12 PITCH | |
TABLE 21 | FLAT ROOT MAJOR DIAMETER FIT—8/16 PITCH | |
TABLE 22 | FLAT ROOT MAJOR DIAMETER FIT—10/20 PITCH | |
TABLE 23 | FLAT ROOT MAJOR DIAMETER FIT—12/24 PITCH | |
TABLE 24 | FLAT ROOT MAJOR DIAMETER FIT—16/32 PITCH | |
TABLE 25 | FILLET ROOT SIDE FIT—2.5/5 PITCH | |
TABLE 26 | FILLET ROOT SIDE FIT—3/6 PITCH | |
TABLE 27 | FILLET ROOT SIDE FIT—4/8 PITCH | |
TABLE 28 | FILLET ROOT SIDE FIT—5/10 PITCH | |
TABLE 29 | FILLET ROOT SIDE FIT—6/12 PITCH | |
TABLE 30 | FILLET ROOT SIDE FIT—8/16 PITCH | |
TABLE 31 | FILLET ROOT SIDE FIT—10/20 PITCH | |
TABLE 32 | FILLET ROOT SIDE FIT—12/24 PITCH | |
TABLE 33 | FILLET ROOT SIDE FIT—16/32 PITCH | |
TABLE 34 | FILLET ROOT SIDE FIT—20/40 PITCH | |
TABLE 35 | FILLET ROOT SIDE FIT—24/48 PITCH | |
TABLE 36 | FILLET ROOT SIDE FIT—32/64 PITCH | |
TABLE 37 | FILLET ROOT SIDE FIT—40/80 PITCH | |
TABLE 38 | FILLET ROOT SIDE FIT—48/96 PITCH | |
TABLE 39 | MACHINING TOLERANCES | |
Unnamed Dataset 41 | ||
TABLE 40 | BASIC TOOTH DIMENSIONS FOR SERRATIONS | |
TABLE 42 | EFFECTIVE CLEARANCES FOR SERRATIONS—TEN THOUSANDTHS (20 = 0.0020) | |
TABLE 43 | INTERNAL FORM ANGLE FOR INTERNAL STRAIGHT SIDED SERRATIONS | |
TABLE 44 | 10/20 PITCH | |
TABLE 45 | 16/32 PITCH | |
TABLE 45 | 5A—20/40 PITCH | |
TABLE 45 | 5B—20/40 PITCH | |
TABLE 46 | 24/48 PITCH | |
TABLE 47 | 32/64 PITCH | |
TABLE 48 | 40/80 PITCH | |
TABLE 49 | 48/96 PITCH | |
TABLE 50, 51, AND 52 | 64/128, 80/160, AND 128/250 PITCH | |
TABLE 53 | MACHINING TOLERANCES | |
TABLE 55 | ALLOWABLE ERRORS FOR GAGES | |
TABLE 56 | TOLERANCES FOR ACTUAL SPACE WIDTH AND TOOTH THICKNESS OF GAGES | |
TABLE 57 | TOLERANCES FOR MEASUREMENTS OVER PINS ON PLUG GAGES | |
TABLE 58 | TOLERANCES FOR MEASUREMENTS BETWEEN PINS ON RING GAGES | |
TABLE 59 | TOLERANCES FOR MAJOR AND MINOR DIAMETERS OF GAGES | |
TABLE 60 | WEAR ALLOWANCES FOR GO GAGES | |
TABLE 61 | INVOLUTE ROLL ANGLES | |
TABLE 62 | MEASUREMENTS BETWEEN PINS FOR MAXIMUM ACTUAL SPACE WIDTH—INTERNAL INVOLUTE SPLINES | |
TABLE 63 | MEASUREMENTS OVER PINS FOR MINIMUM ACTUAL TOOTH THICKNESS—EXTERNAL CLASS 1 FIT INVOLUTE SPLINES | |
TABLE 64 | MEASUREMENTS OVER PINS FOR MINIMUM ACTUAL TOOTH THICKNESS—EXTERNAL CLASS 2 FIT INVOLUTE SPLINES | |
TABLE 65 | MEASUREMENT BETWEEN PINS FOR MAXIMUM ACTUAL SPACE WIDTH—INTERNAL INVOLUTE SERRATIONS | |
TABLE 66 | MEASUREMENTS BETWEEN PINS FOR MAXIMUM ACTUAL SPACE WIDTH—INTERNAL STRAIGHT SIDED SERRATIONS | |
TABLE 67 | MEASUREMENTS OVER PINS FOR MINIMUM ACTUAL TOOTH THICKNESS—EXTERNAL INVOLUTE SERRATIONS | |
TABLE 69 | ONE/TWO PITCH BASIC DIMENSIONS | |
Unnamed Dataset 69 | ||
Unnamed Dataset 70 | ||
TABLE 70 | INVOLUTE SPLINE BASIC TOOTH DATA | |
TABLE 71 | SEVOLUTES OF ANGLES | |
TABLE 72 | NUMBER OF TEETH AND NOMINAL MAJOR DIAMETERS UNDER BEARING BORE | |
TABLE 73 | FORMULAS FOR DIMENSIONS AND TOLERANCES IN TO | |
TABLE 73 | FORMULAS FOR DIMENSIONS AND TOLERANCES IN TO | |
TABLE 73 | FORMULAS FOR DIMENSIONS AND TOLERANCES IN TO | |
TABLE 74 | INVOLUTE SERRATION BASIC TOOTH DATA | |
TABLE 75 | MEASUREMENTS BETWEEN PINS FOR BASIC SPACE WIDTH, INTERNAL INVOLUTE SPLINES | |
TABLE 76 | MEASUREMENTS OVER PINS FOR BASIC TOOTH THICKNESS, EXTERNAL INVOLUTE SPLINES | |
TABLE 77 | MEASUREMENTS BETWEEN PINS FOR BASIC SPACE WIDTH—INTERNAL INVOLUTE SERRATIONS | |
TABLE 78 | MEASUREMENTS BETWEEN PINS FOR BASIC SPACE WIDTH—INTERNAL STRAIGHT SIDED SERRATIONS | |
TABLE 79 | MEASUREMENTS OVER PINS FOR BASIC TOOTH THICKNESS—EXTERNAL INVOLUTE SERRATIONS |
Issuing Committee
The Spline Committee ¿ B92 develops and maintains SAE Standards, Recommended Practices and Information Reports relating to Participants in the SAE Spline Committee ¿ B92 include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
Number | Title |
---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.