This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for
- Aerospace Standard
- AS5000C
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone AS5827 or EN 6123 flareless Ring locked fitting assemblies per AS5550 and AS5865, for use in aircraft fluid systems at nominal operating pressure of 5080 psi (35 000 kPa) maximum and operating temperature range of -65 to +275 °F (-54 to +135 °C).
The general requirements shall be for, but not limited to, commercial aircraft hydraulic components per AS4941, using port configuration as specified in AS5551.
Rationale
Include SI Metric equivalents for ISO recognition of this document.
Recommended Content
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
TABLE 1 | MATERIALS | |
TABLE 2 | BENDING STRESS LEVEL | |
TABLE 3 | TENSILE LOADS | |
TABLE 4 | PLUG-IN UNION PORT END, INSTALLATION TORQUE | |
TABLE 5 | TUBE FITTING-NUT ASSEMBLY TORQUE | |
TABLE 6 | CLASSIFICATION OF DEFECTS | |
Unnamed Dataset 12 | ||
TABLE 7 | QUALITY CONFORMANCE INSPECTION | |
TABLE 8 | TUBE LENGTH - ALTERNATE VIBRATION TEST | |
TABLE 9 | VIBRATION TEST SERIES | |
TABLE 10 | TESTING AND TEST SAMPLES FOR PRODUCT QUALIFICATION | |
TABLE 10 | TESTING AND TEST SAMPLES FOR PRODUCT QUALIFICATION (CONTINUED) | |
TABLE 11 | QUANTITY OF UNIT PACKAGES | |
TABLE 12 | AS5551 PORT MATERIAL AND DIMENSIONS USED IN QUALIFICATION TESTING |
Issuing Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Committee is responsible for developing and maintaining standards for design, test, and procurement of fluid systems part standards to improve reliability and economy. Their primary focus is on AS standards development and support of military standards. The Committee also develops ISO standards in a Subcommittee Advisory Group (SCAG) to ISO/TC 20/SC 10, and SAE-MA derivatives thereof.
Structure: SAE G-3 -- Parent committee SAE G-3A -- Aerospace Couplings Subcommittee SAE G-3B -- Aerospace Fittings Subcommittee SAE G-3D -- Aerospace Hose Subcommittee SAE G-3E - Aerospace Tubing Assemblies Subcommittee U.S. SCAG to ISO/TC 20/SC 10 -- ISO standards Major projects: Support of Military Standards Reform Support of military standard conversions to MIL-PERF and MIL-DTL. Development of AS replacements for military standards designated for conversion. Establish document to list G-3 accepted replacements for replaced part standards and military back-up specifications. Development of PRI QML/QPL Development of Performance Review Institute (PRI) process for approval and surveillance of manufacturers (Qualified Manufacturer List, QML) and for approval of standard parts as qualified for use (Qualified Parts List, QPL). Development of ISO Standards, Imperial Units ISO/TC 20/SC 10 standards have typically been developed in SI units. The ISO has approved development of inch-based ISO standards to support commercial aviation. Basic design, test, and procurement specifications will be selected from military standards that are to be converted to Non-Government standard (NGS) and developed as ISO standards.Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.