This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Environmental Control System for an Experimental Crew Return Vehicle
Annotation ability available
Sector:
Language:
English
Abstract
A small team of NASA engineers has been assembled at the Johnson Space Center, with the goal of developing an inexpensive space-capable vehicle. In order to minimize cost and development time of the experimental vehicle, it was desirable to build upon a previously-developed vehicle shape. The basic shape of the X-24A experimental lifting body was chosen for several reasons, and in the case of the Environmental Control and Life Support (ECLS), the de-orbit cross-range capability of this shape provides for a minimal on-orbit time while waiting for landing opportunities, which in turn simplifies the ECLS. Figure 1 shows the X-38 vehicle body shape.
In keeping with the goal of rapidly developing an inexpensive and reliable vehicle, the ECLS was developed using simple, passive systems where practical. This paper provides an overview of the ECLS mission requirements and design, with emphasis on the philosophy used in its development. In addition, some initial testing and analysis results are presented to support the validation of the operational concept.
Authors
Citation
Dingell, C. and Hurlbert, K., "Environmental Control System for an Experimental Crew Return Vehicle," SAE Technical Paper 972263, 1997, https://doi.org/10.4271/972263.Also In
References
- Molecular Sieves P. O. Box 2117, Baltimore, Maryland 21203-2117
- The Porous Plate Sublimator
- Tongue, S. E. Swartley, V. “The Porous Plate Sublimator as the X-38/CRV Orbital Heat Sink,” 27 th International Conference on Environmental Systems Lake Tahoe, Nevada July 14-17 1997
- EMU Requirements Evolution June 20 1994
- Nason, J. R. Decrisantis, A. A. “Shuttle Orbiter Flash Evaporator,” 9 th Intersociety Conference on Environmental Systems San Francisco, California July 16-19 1979
- Heinrich, S. R. “Shuttle Orbiter Ammonia Boiler Subsystem,” Intersociety Conference on Environmental Systems San Francisco, California July 13-15 1981
- Hale, D. V. Hoover, M. J. O'Neill, M. J. Phase Change Materials Handbook 4800 Bradford Drive, Huntsville, Alabama 35812, #NASA CR-61363 September 1971
- Reynolds, D. F. Chambliss, J. P. Keener, J. F. “G189A Program Manual - Revision 1, Generalized Environmental/Thermal Control and Life Support Systems Computer Program,” NASA Johnson Space Center Project Document, Crew and Thermal Systems Division February 17 1987