This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Influence on Materials Flow in Deep Drawing Using Individual Controllable Draw Pins and Smooth Blankholder Design
Annotation ability available
Sector:
Language:
English
Abstract
With modern multipoint drawing equipment, it is possible to control the draw pins independently of each other. This gives the possibility to specifically change the normal force distribution between blankholder and workpiece regarding location and time. Investigations show that the effects which are achievable with multipoint drawing technology are only possible in conjunction with a changed blankholder design. The increase in the maximum drawing depth by approximately 57% were achieved. In addition to experimental work, numeric simulation is used to determin the necessary setting parameters.
Recommended Content
Technical Paper | Closed Loop Binder Force System |
Technical Paper | Variable Frequency Use in Aerospace Electrical Power Systems |
Technical Paper | Integration of Virtual Prototyping with Instrumented Testing of Vehicles |
Authors
Citation
Neugebauer, R., Leib, U., and Bräunlich, H., "Influence on Materials Flow in Deep Drawing Using Individual Controllable Draw Pins and Smooth Blankholder Design," SAE Technical Paper 970989, 1997, https://doi.org/10.4271/970989.Also In
References
- Siegert, K. Klamser, M. 1991 41 66
- Haller, G. 1992 115 165
- Klamser, M. 1991 23 38
- Schneider, F. 1991 111 133
- Cherek, H. Neumann, C-P. 1991 135 149
- Bielfeldt, F.B. 1991 149 187
- Petter, W. Geist, G. Schlag, A. 1991 69 83
- Neugebauer, R. Bräunlich, H. Klose, L. 1995
- Klose, L. Bräunlich, H. 1996 512 516
- Kunke, E. 1996