This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Model for Analyzing Cracking of Coatings
Annotation ability available
Sector:
Language:
English
Abstract
A method for analyzing cracking in the finish coatings on aircraft composite parts is described. The method is based on a model in which cracking is caused by hygrothermal tensile strain induced by cold and dry conditions, enhanced by creep relaxation of hygrothermal compressive stress from hot wet conditions.
Recommended Content
Technical Paper | Weatherable Coatings for Thermoplastic Substrates |
Technical Paper | U. V. Processing of “Solventless” Coatings for Automotive Plastic Lense Material |
Authors
Citation
Lempriere, B., "A Model for Analyzing Cracking of Coatings," SAE Technical Paper 951137, 1995, https://doi.org/10.4271/951137.Also In
References
- “Finish Cracking of Composite Flight Control Surfaces” Maguire R.G.
- “Hygrothermal Damage Mechanisms in Graphite-Epoxy Composites” NASA Contractor Report 3189 Lockheed Missiles and Space Co. Crossman F.W. Mauri R.E. Warren J.W. 1979
- “Analysis of the Viscoelastic Response of Composite Laminates During Hygrothermal Exposure” Flaggs D.L. Crossman F.W. J. Composite Mechanics 1981 21
- “Residual Thermal Stresses in an Unsymmetrical Cross-Ply Graphite-Epoxy Laminate” Harper B.D. Weitsman Y. Structural Dynamics, & Materials Conference Atlanta, GA 1981
- “ADVLAM - An Advanced Composite Laminate Analysis Code” Flaggs D.L. Lockheed Palo Alto Research Labs Sept 1983
- “Elementary Engineering Fracture Mechanics” Broek D. Nijhoff Martinus The Hague 1982
- “Initiation and Growth of Transverse Cracks and Edge Delamination in Composite Laminates, Part 1. An Energy Method” Wang A.S.D. Crossman F.W. Journal of Composite Materials 14 1980 71
- “An Energy Method for Multiple Transverse Cracks in Graphite-Epoxy Laminates” Wang A.S.D. Law C.E. Jr. Warren W.J. Modern Development in Composite Materials and Structures Vinson J.R. 1979 17
- “Fracture of Unidirectional Composites: Theory and Applications” Hahn H.T. Johannesson T. Mechanics of Composite Materials 48 1983 American Society of Mechanical Engineers New York 135
- “A Simplified Analysis of Transverse Ply Cracking in Cross-Ply Laminates” Han Y.M. Hahn H.T. Croman R.B. Composites Science and Technology 31 1988 165
- “The Strain Energy Release Rate of Composite Microcracking: A Variational Approach” Nairn J.A. Journal of Composite Materials 23 1989 1106
- “A Model for Prediction of the Transverse Cracking Strain in Cross-Ply Laminates” Varna J. Berglund L.A. Journal of Reinforced Plastics and Composites 11 1992 708
- “A Finite Element Calculation of Stress Intensity Factors by a Modified Crack Closure Integral” Rybicki E.F. Kanninen M.F. Engineering Fracture Mechanics 9 1977 931