This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Energy-Absorbing Polyurethane Foam to Improve Vehicle Crashworthiness
Annotation ability available
Sector:
Language:
English
Abstract
Federal legislation mandates that automotive OEMS provide occupant protection in collisions involving front and side impacts This legislation, which is to be phased-in over several years, covers not only passenger cars but also light-duty trucks and multipurpose passenger vehicles (MPVs) having a gross vehicle weigh rating (GVWR) of 8,500 lb (3,850 kg) or less.
During a frontal impact, occupants within the vehicle undergo rapid changes in velocity. This is primarily due to rapid vehicle deceleration caused by the rigid nature of the vehicle's metal frame components and body assembly. Many of today's vehicles incorporate deformable, energy-absorbing (EA) structures within the vehicle structure to manage the collision energy and slow the deceleration which in turn can lower the occupant velocity relative to the vehicle. Occupant velocities can be higher in light-duty trucks and MPVs having a full-frame structure resulting in increased demands on the supplemental restraint system (SRS). In these types of vehicles an energy management system can be installed between the bumper and the vehicle structure to help absorb some of the collision energy and reduce occupant velocities.
This paper describes an energy management system based on polyurethane foam to improve the crash signature of light-duty trucks and MPVs. The design and development requirements for this system are detailed as are material evaluations and full-scale impact testing. Development of a polyurethane material to meet the design requirements is also outlined. The test results demonstrate that vehicle crashworthiness can be improved by using energy-absorbing polyurethane foam to modify a vehicle's crash signature.
Recommended Content
Technical Paper | Dynamic Impact Testing of Polyurethane Energy Absorbing (EA) Foams |
Technical Paper | Deformable Barriers and Occupant Protection in Offset Frontal Car-to-Car Crashes |
Ground Vehicle Standard | Event Data Recorder - Compliance Assessment |
Authors
Topic
Citation
Syrowik, G., Huber, M., Sounik, D., and Gansen, P., "Energy-Absorbing Polyurethane Foam to Improve Vehicle Crashworthiness," SAE Technical Paper 950553, 1995, https://doi.org/10.4271/950553.Also In
References
- Mertz, Harold J. Marquardt, James F. Small Car Air Cushion Performance Considerations SAE Government/Industry Meeting and Exposition (# 851199 ) 1985
- Oertel, G. Handbook of Polyurethanes 2nd Ed Hanser, Munich 1994 Saunders, J. Frisch, K. Polyurethanes: Chemistry and Technology Vols. 1 and 2 Interscience New York 1962
- Thompson-Colon, J. Huber, M. Liddle, J. Fundamental Studies of Polyurethane Foam for Energy Absorption in Automotive Interiors SAE International Congress and Exhibition (# 910404 ) 1991 McCullough, D. Pakulsky, B. Liddle, J. Polyurethane Foam for Automotive Knee Bolsters SAE International Congress and Exhibition (# 920336 ) 1992 Sounik, D. McCullough, D. Clemons, J. Liddle, J. Dynamic Impact Testing of Energy Absorbing (EA) Polyurethane Foams SAE International Congress and Exhibition (# 940879 ) 1994
- Kath, H. Avar, G. Thompson-Colon, J. Energy Absorbing Polyurethane Foams for Modular Bumper Concepts Proceedings of the SPI 32nd Annual Polyurethane Technical/Marketing Conference 587 1989 McCullough, D. Frick, T. Crater, G. Seagrave, T. Tranquill, J. All-Polyurethane Modular Bumper Systems Proceedings of the SPI 34th Annual Polyurethane Technical/Marketing Conference 220 1992