This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
High Capacity Grooved Heat Pipes
Annotation ability available
Sector:
Language:
English
Abstract
In the frame of an ESA technology program, the development of a High Capacity Grooved Heat Pipe (HGP), based on the thermal requirements of the next generation of telecommunication satellites, was contracted to SABCA.
Different promising concepts and methods of groove technology were reviewed. A trade-off and design study was performed on potential HGP concepts, taking into account theoretical performances (on earth and in micro-gravity), ease of manufacturing and of assembly as well as the heat pipe working reliability and priming capability.
The two finally selected concepts were aluminium extruded heat pipes (outer diameter of 25 mm, vapour core diameter of 15 mm), based on a multi re-entrant grooves concept or on a mixed rectangular/re-entrant grooves concept.
The acceptance test program, to which these two heat pipes had been submitted, included leak, proof and burst tests as well as classical thermal tests (maximum heat transport capacity, maximum tilt capability, start-up, priming, gas plug/ageing, bending influence, sensitivity to non-condensible gas, non-uniform heat input).
The test results showed for the multi re-entrant grooves HGP heat pipe good confidence and the fulfilment of the required specifications on heat transport capacity and on tilt capability: the experimental maximum heat transport capability was found to be around 1500 Watt-metres (horizontally at a vapour temperature of 20°C) for a required 600 Watt-metres while the maximum tilt capability had been measured between 18 mm (at a vapour temperature of 20°C).
Based on the HGP concept, two down-scaled versions (outer diameter of 15 mm and of 20 mm) had been developed and tested in order to analyze the impact of the size on the performance of this heat pipe design.
In the frame of an ESA parabolic flight campaign, the three versions of the HGP heat pipes (15 mm, 20 mm, 25 mm) were submitted to various heat loads, going for some of them to their maximum heat transport capacities. This parabolic flight, which led to useful data on the maximum performances and/or on their operating behaviour of these heat pipes in micro-gravity environment, is briefly presented and its results described.
The next step in this technology program, currently on-going, is the full qualification of this newly developed re-entrant groove heat pipe design according to the ESA requirements.
Authors
Citation
Dubois, M., Mullender, B., Van Oost, S., and Supper, W., "High Capacity Grooved Heat Pipes," SAE Technical Paper 932303, 1993, https://doi.org/10.4271/932303.Also In
References
- Heat Pipes Qualification Requirements ESA PSS-49 2 March 1983
- Dubois M. Van Oost S. Mullender B. High Capacity Grooved Heat Pipe Final Report Oct 1992
- Dunn P.D. Reay D.A. Heat Pipes 3rd 1982
- Dobran F. Heat Pipe Research and Development in the Americas 6th International Heat Pipe Conference 1987
- Saski E.W. Investigation of an Inverted Meniscus Heat Pipe Wick Concept NASA CR-137724 August 1975
- Brost O. Gröll M. Münzel W.D. Technical Applications of Heat Pipes 3rd IHPC 1978
- Brennan P.J. Kroliczek E.J. Jen H. Mc Intosh R. Axially Grooved Heat Pipes - 1976 AIAA 12th Thermophysics Conference 1977
- Richter R.F.G. Brennan P.J. Rankin J.G. Development of an Advanced Trapezoidal Axially Grooved (ATAG) Heat Pipe AIAA paper 86-1342
- Harwell W. Analysis and Tests of NASA Covert Groove Heat Pipe Grumann Aerospace Corporation, NASAM CR-135156 1976
- Meyer R. Laux U. Schlitt R. Excess Liquid Formation in Orbit Test Results of Axially Grooved Heat Pipes AIAA 20th Thermophysics Conference 1985
- Barantsevich V.L. Opryshko S.I. Sasin V.Y. Methods for Improving the Maximum Heat Transfer Capacity of Axially Grooved Heat Pipe Heat Transfer - Soviet Research 16 4 1984
- Pietsch C. Hauser J. Development and Testing of a High Performance Quadro-Groove Heat Pipe- 21st International Conference on Environmental Systems 1991
- Schlitt R. Performance Characteristics of Recently Developed High Performance Heat Pipes 8th International Heat Pipe Conference 1992