Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Aftertreatment System Performance of a Fuel Reformer, LNT and SCR System Meeting EPA 2010 Emissions Standards on a Heavy-Duty Vehicle

Journal Article
2010-01-1942
ISSN: 1946-391X, e-ISSN: 1946-3928
DOI: https://doi.org/10.4271/2010-01-1942
Published October 05, 2010 by SAE International in United States
Aftertreatment System Performance of a Fuel Reformer, LNT and SCR System Meeting EPA 2010 Emissions Standards on a Heavy-Duty Vehicle
Sector:
Citation: McCarthy, J., Dykes, E., Ngan, E., and Strots, V., "Aftertreatment System Performance of a Fuel Reformer, LNT and SCR System Meeting EPA 2010 Emissions Standards on a Heavy-Duty Vehicle," SAE Int. J. Commer. Veh. 3(1):130-142, 2010, https://doi.org/10.4271/2010-01-1942.
Language: English

References

  1. McCarthy, J., Jr. Korhumel, T., Jr. Marougy, A. “Performance of a Fuel Reformer, LNT and SCR Aftertreatment System Following 500 LNT Desulfation Events,” SAE Int. J. Commer. Veh. 2 2 34 44 2009 10.4271/2009-01-2835
  2. U.S.E.P.A. (United States Environmental Protection Agency) Federal Register-CFR Part 69 39216 39219 2004
  3. Schommers, J. Breitbach, H. “A Global Emission Strategy-Bluetec for Diesel Engines,” Auto Technology 48 51 Mar. 2007
  4. Snow, R. Dobson, D. Hammerle, R. Katare, S. “Robustness of a LNT-SCR System to Aging Protocol,” SAE Technical Paper 2007-01-0469 2007 10.4271/2007-01-0469
  5. McCarthy, J., Jr. Holtgreven, J. “Advanced NOx Aftertreatment System Performance Following 150 LNT Desulfation Events,” SAE Technical Paper 2008-01-1541 2008 10.4271/2008-01-1541
  6. Dykes, E.C. “NOx Performance of an LNT+SCR System Designed to Meet EPA 2010 Emissions: Results of Engine Dynamometer Emission Tests,” SAE Int. J. Commer. Veh. 1 1 327 337 2008 10.4271/2008-01-2642
  7. Chimner, C. “Transient On-Road Emission Reduction of an LNT & SCR Aftertreatment System,” SAE Int. J. Commer. Veh. 1 1 315 326 2008 10.4271/2008-01-2641
  8. McCarthy, J., Jr. Taylor, W., III “LNT+SCR Systems for Medium-Heavy Duty Application: A Systems Approach,” 13th Diesel Engine-Efficiency and Emission Research Conference August 13-16 2007 Detroit, MI
  9. Hu, H. Reuter, J. Yan, J. McCarthy, J., Jr. “Advanced NOx Aftertreatment System and Controls For On-Highway Heavy Duty Diesel Engines,” SAE Technical Paper 2006-01-3552 2006 10.4271/2006-01-3552
  10. Dalla Betta, R. Cizeron, J. “Pre-combustors for internal combustion engines and systems and methods therefore,” Publication Number US7240483 07 10 2007
  11. Dalla Betta, R. Cizeron, J. Sheridan, D. Davis, T. “Use of a Diesel Fuel Processor for Rapid and Efficient Regeneration of Single Leg NOx Adsorber Systems,” 2003 Diesel Engine Emissions Reduction Conference Aug. 24-28 2003 Newport, RI
  12. Bamber, D. Ambrose, S. McCarthy, J., Jr. “Fuel Injector Optimization For Diesel Aftertreatment Systems Coupled With Exhaust Aftertreatment System Performance on a Heavy-Duty Diesel Engine Powered Vehicle,” SAE Int. J. Commer. Veh. 3 1 111 129 2010 10.4271/2010-01-1940
  13. McCarthy, J. Jr. “Simulation Of Fuel-Exhaust Mixing in Exhaust Aftertreatment Systems Using Simplified Spray Models For Pulse-Width Modulated Fuel Injectors,” Journal of Atomization and Sprays 19 5 2009 425 444
  14. U.S.E.P.A. (United States Environmental Protection Agency) December 2000 Regulatory Impact Analysis: Heavy-duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements 96 98
  15. Yang, H. Tsourapas, V. Prakash, A.K. Yuan, Q. et al. “Hardware-in-the-Loop (HIL) Modeling and Simulation for Diesel Aftertreatment Controls Development,” SAE Technical Paper 2009-01-2928 2009 10.4271/2009-01-2928
  16. Yang, H. Chimner, C. “Integration of Reformer Model Based Estimation, Control, and Diagnostics for Diesel LNT Based Aftertreatment Systems,” SAE Int. J. Engines 3 1 282 295 2010 10.4271/2010-01-0569
  17. Wetzel, P.W. McCarthy, J.E., Jr. Kulkarni, M. Mohanta, L. et al. “Diesel Exhaust Aftertreatment Packaging and Flow Optimization on a Heavy-Duty Diesel Engine Powered Vehicle,” SAE Int. J. Commer. Veh. 3 1 143 155 2010 10.4271/2010-01-1944
  18. Karkkainen, A. Adelman, B. Berke, P. Wyatt, S. Rodgers, D. Heibel, D. Parker, T. Pickles, D. Tao, T. Zink, U. “Development and Application of a US-EPA '07 Particulate Filter System for a 7.6l I-6 Medium Duty Truck Engine” Fahrzeug-und Motorentechnik 2006

Cited By

Recommended Content

Technical Paper Diesel Vehicle with Ultra-Low NOx Emissions on the Road
Journal Article Mixture Non-Uniformity in SCR Systems: Modeling and Uniformity Index Requirements for Steady-State and Transient Operation
Technical Paper Passenger Car Series Application of a New Diesel Particulate Filter System Using a New Ceria-Based Fuel-Borne Catalyst: From the Engine Test Bench to European Vehicle Certification