This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Real-time Simulation of a Vehicle Door Locking Mechanism on a Hardware-in-the-Loop Platform
Technical Paper
2010-01-0666
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
An automotive side door latch release mechanism has been modelled for the locking and unlocking vehicle functionality in Dymola. The performance of the developed door lock model is evaluated against an existing model of a similar door locking/unlocking system in Stateflow. The model performance is also compared with measurements from a real vehicle door latch. The model is converted into a Simulink model and built for a real-time environment such as the dSPACE target with a fixed step size solver. It is shown that a step size as small as 1 ms can be used for real-time simulation without task overrunning in the real-time target. The model is also benchmarked on a multiprocessor setup as multiprocessor simulators are common in system-level networked Electronic Controller Unit (ECU) testing facilities for implementing high fidelity closed loop models of integrated ECUs and actuators. It is proven that the developed door lock model in Dymola can be built and executed on a multiprocessor platform and there is much potential on the use of such models for future work in ECU testing.
Recommended Content
Authors
Topic
Citation
Thanagasundram, S., McMurran, R., Jones, R., and Mouzakitis, A., "Real-time Simulation of a Vehicle Door Locking Mechanism on a Hardware-in-the-Loop Platform," SAE Technical Paper 2010-01-0666, 2010, https://doi.org/10.4271/2010-01-0666.Also In
References
- Bur, A.W. Dierauer, P.P. Ricks, L.F. “Honeywell's Automotive Door Latch Design is Ideal for Corporate Latch Strategy,” SAE Technical Paper 2003-01-1190 2003
- Gilberg, A. Marcosky, J. Sherman, L. Clarke, R. “Door Latch Strength in a Car Body Environment,” SAE Technical Paper 980028 1998
- Udriste, D.I. Negrus, E.M. “Construction and Kinematics of Automotive Side Door Latch Mechanisms,” SAE Technical Paper 2005-01-0881 2005
- Dynasim AB Dynamic Modelling Laboratory http://www.dymola.com/ 30 September 2009
- Modelica Association Specification, Tutorials http://www.modelica.org/ 30 September 2009
- Tiller M. Introduction to physical modelling with Modelica Kluwer 2001
- The MathWorks, Inc., Natick, MA 2004 http://www.mathworks.com 30 September 2009
- The MathWorks, Inc. Stateflow Technical Documentation http://www.mathworks.co.uk/products/stateflow/technicalliterature.html 30 September 2009
- dSPACE digital signal processing and control engineering GmbH, dSPACE GmbH http://www.dspaceinc.com 30 September 2009
- Hanselmann, H. “Automotive control: From concept of Experiment to Product” Proceedings of the IEEE International Symposium on Computer-Aided Control System Design 129 134 1996
- Thanagasundram Suguna McMurran Ross Dhadyalla Gunwant Jones R. Peter Mouzakitis Alexandros “Dynamic Analysis of an Automotive Door Latching Mechanism through the use of Dymola/Modelica” 7th International Conference on Manufacturing Research (ICMR09) University of Warwick UK September 8-10 2009
- Kendall, I.R. Jones, R.P. “Investigation into the use of hardware-in-the-loop simulation testing for automotive electronic control systems” Control Engineering Practice 7 11 1343 1356 1999
- Li, J. Yu, F. Zhang, J.W. Feng, J.Z. Zhao H.P. “The rapid development of a vehicle electronic control system and its application to an antilock braking system based on hardware-in-the-loop simulation” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216 2 95 105 2002
- Gietelink, O. Ploeg, J. De Schutter, B. Verhaegen, M. “Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations” Vehicle System Dynamics 44 7 569 590 2006
- Lee, K.C. Jeon, J.W. Hwang, D.H. Lee, S.H. Kim, Y.J. “Development of antilock braking controller using hardware in-the-loop simulation and field test” Proceedings of the IECON (Industrial Electronics Conference) 2004 3 2137 2141 2004
- Tartt, C.J. Moskwa, J.J. “A hardware-in-the-loop transient diesel engine test system for control and diagnostic development” Proceedings of the ASME Dynamic Systems and Control Division 70 255 261 2002
- Isermann, R. Schaffnit, J. Sinsel, S. “Hardware-in-the-loop simulation for the design and testing of engine-control systems” Control Engineering Practice 7 5 643 653 1999
- Mouzakitis, A. Humphrey, R. Bennett, P. Burnham, K.J. “Development, Testing and Validation of Complex Automotive Systems” Proceedings of the 10th Mechatronics Forum Biennial International Conference, MX2006 Philadelphia, USA 2006
- Elmqvist H. Mattsson S.-E. Olsson H. “New Methods for Hardware-in-the-Loop Simulation of Stiff Models,” Proceedings of the 2nd Intemational Modelica Conference 59 64 2002
- Elmqvist H. Cellier F. Otter M. “Inline Integration, A new mixed symbolic/numeric approach for solving differential-algebraic equation systems” Proceedings of European Simulation Multiconference Prague XXIII XXXIV June 1995
- Soejima S. “Examples of usage and the spread of Dymola within Toyota” Modelica Workshop 2000 proceedings 55 59 2000