Search
Advanced Search
of the following are true

Results

Items (207,157)
This specification covers a rust removing compound in the form of a solid, generally powdered, to be dissolved in water, and heated
AMS J Aircraft Maintenance Chemicals and Materials Committee
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design of flanges on temperature sensors intended for use in gas turbine engines. Three figures detail the configuration of standard size flange mounts with bolt holes, slotted flanges, and miniaturized flanges for small probes
E-32 Aerospace Propulsion Systems Health Management
This SAE Aerospace Recommended Practice (ARP) defines the nomenclature of temperature measuring devices. General temperature measurement related terms are defined first, followed by nomenclature specifice to temperature measuring devices, particularly thermocouples
E-32 Aerospace Propulsion Systems Health Management
This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of 9100. This document is published as AQAP 2009 Annex F and 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and 9100
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE practice is intended for the sample preparation of test pieces for automotive wheels and wheel trim. The practice provides a consistent scribing method for use on test panels and or component parts with substrate chemical pretreatment and coating systems. Test specimens can then be subjected to various corrosion tests in order to evaluate performance without significant variations of the degree of exposure of the substrate. The scribing is used to create a break in the coating/finishing as can occur in the field through gravel and other damaging conditions. NOTE— Significant variability is attributed to surface contour, coating hardness/softness, operator reproducibility, and the scribing tool and it’s condition
Wheel Standards Committee
This Aerospace Recommended Practice (ARP) is a general overview of typical airborne engine vibration monitoring (EVM) systems applicable to fixed or rotary wing aircraft applications, with an emphasis on system design considerations. It describes EVM systems currently in use and future trends in EVM development. The broader scope of Health and Usage Monitoring Systems, (HUMS) is covered in SAE documents AS5391, AS5392, AS5393, AS5394, AS5395, AIR4174. This ARP also contains the essential elements of AS8054 which remain relevant and which have not been incorporated into Original Equipment Manufacturers (OEM) specifications
E-32 Aerospace Propulsion Systems Health Management
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document provides standardized laboratory tests, test methods and equipment, and requirements for lighting devices covered by SAE Recommended Practices and Standards. It is intended for devices used on vehicles less than 2032 mm in width. Tests for vehicles larger than 2032 mm in overall width are covered in SAE J2139. Device specific tests and requirements can be found in applicable SAE technical reports
Test Methods and Equipment Stds Committee
This specification covers a corrosion- and heat-resistant, work-strengthened, and aged cobalt-nickel-chromium alloy in the form of bars 2 inches (50 mm) and under in nominal diameter
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of sheet 0.040 to 0.249 inches (1.02 to 6.32 mm), inclusive, in nominal thickness (see 8.5
AMS D Nonferrous Alloys Committee
SAE J3072 establishes requirements for a grid support inverter system function that is integrated into a plug-in electric vehicle (PEV), which connects in parallel with an electric power system (EPS) by way of conductively coupled, electric vehicle supply equipment (EVSE). This standard also defines the communication between the PEV and the EVSE required for the PEV onboard inverter function to be configured and authorized by the EVSE for discharging at a site. The requirements herein are intended to be used in conjunction with IEEE 1547-2018 and IEEE 1547.1-2020 or later versions
Hybrid - EV Committee
This standard specifies the communications hardware and software requirements for fueling hydrogen surface vehicles (HSV), such as fuel cell vehicles, but may also be used where appropriate with heavy-duty vehicles (e.g., buses) and industrial trucks (e.g., forklifts) with compressed hydrogen storage. It contains a description of the communications hardware and communications protocol that may be used to refuel the HSV. The intent of this standard is to enable harmonized development and implementation of the hydrogen fueling interfaces. This standard is intended to be used in conjunction with the hydrogen fueling protocols in SAE J2601 and nozzles and receptacles conforming with SAE J2600
Fuel Cell Standards Committee
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings 10.0 inches (254 mm) and under in nominal diameter or distance between parallel sides, and stock of any size for forging, flash-welded rings, or heading
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and foil 0.1874 inch (4.76 mm) and under in nominal thickness
AMS F Corrosion and Heat Resistant Alloys Committee
l. ACKNOWLEDGMENT: A vendor must mention this specification number and its last revision in all quotations and when acknowledging purchase orders. 2. FORM: Bars, billets, forgings, tubing, or as ordered
AMS E Carbon and Low Alloy Steels Committee
This specification covers a low-alloy steel in the form of round bars up to 2.00 in. (50.8 mm), incl, in diameter
AMS E Carbon and Low Alloy Steels Committee
This specification covers an aluminum alloy in the form of drawn seamless round tubing
AMS D Nonferrous Alloys Committee
This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole
AMS E Carbon and Low Alloy Steels Committee
This specification covers a corrosion and heat resistant nickel alloy in the form of vacuum-melted, vacuum-cast investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an irradiated, thermally-stabilized, modified polyolefin plastic in the form of thin-wall tubing
AMS P Polymeric Materials Committee
This specification covers the specific requirements for 1100 aluminum alloy bar, rod, and wire produced by rolling, drawing, or cold finishing
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat resistant nickel alloy in the form of vacuum-melted, vacuum-cast investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a moderate corrosion and heat resistant alloy iron in the form of sand castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a corrosion and heat resistant nickel alloy in the form of vacuum-melted, vacuum-cast investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of drawn seamless tubing
AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of sheet and plate
AMS D Nonferrous Alloys Committee
This document establishes standard gland dimensions for low pressure static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices
AE-5B Aircraft and Engine Fuel and Lubricant Sys Components
This specification covers the specific requirements for aluminum alloy 6162 bar, rod, shapes, tube, and wire produced by extrusion
AMS D Nonferrous Alloys Committee
This specification covers seamless and welded tubing of corrosion-resistant steel in the annealed condition
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a high temperature brazing flux in the form of paste or powder
AMS B Finishes Processes and Fluids Committee
This document discusses the work done by the U.S. Army Corps of Engineers and the Waterways Experiment Station (WES) in support of SAE A-5 Committee activity on Aerospace Landing Gear Systems. It is an example of how seemingly unrelated disciplines can be combined effectively for the eventual benefit of the overall aircraft system, where that system includes the total airfield environment in which the aircraft must operate. In summary, this AIR documents the history of aircraft flotation analysis as it involves WES and the SAE
A-5 Aerospace Landing Gear Systems Committee
This specification covers an aluminum alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This specification covers the procedure to be used for spraying metallic parts with aluminum and the properties of the coating
AMS B Finishes Processes and Fluids Committee
This specification covers an aluminum alloy in the form of two types of welding wire
AMS D Nonferrous Alloys Committee
This specification covers the procedural requirements necessary for the performance of magnetic rubber inspection
AMS K Non Destructive Methods and Processes Committee
This specification covers an aluminum alloy in the form of plate 0.500 inches (12.7 mm) to 2.250 inches (57.2 mm) in nominal thickness (see 8.6
AMS D Nonferrous Alloys Committee
This specification covers hot-rolled carbon steel bars and heat treated carbon steel bars which are to be used in cold shaping, including cold extrusion, of ammunition components
AMS E Carbon and Low Alloy Steels Committee
This specification covers the servicing of gaseous oxygen cylinders used for breathing purposes in civil aircraft. (Refer to AIR 1059 on Transfilling & Maintenance of Oxygen Cylinders
A-10 Aircraft Oxygen Equipment Committee
This specification covers the requirements for surface preparation of magnesium and magnesium alloys to provide a surface finish which can be soft soldered
AMS B Finishes Processes and Fluids Committee
This specification covers a corrosion and heat resistant cobalt alloy in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
Items per page:
1 – 50 of 207157