Search
Advanced Search
of the following are true
(
)

Results

Items (212,620)
Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard ConditionAMST6845B (Current)07/31/2013
This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As CastAMS4870F (Current)09/21/2017
This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings
AMS D Nonferrous Alloys Committee
Material Specification
Tubing, Plastic, Flexible, Convoluted, Conduit, General SpecificationAMST81914A (Current)12/05/2013
This specification establishes requirements for plastic convoluted tubing that provides mechanical protection and support for electric wire bundles. The continuous operating temperatures range from -67°F (-55°C) to 500°F (260°C) (see 6.1
AE-8C1 Connectors Committee
Material Specification
AS4912 Absorbent Pad. (BaseAS4912-2 (Current)04/24/1952
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1794-1838 45 CWT Cable and Swaged End Assembly CodeAS1794-3 (Current)06/16/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1861-1864 Pulley (Plain BearingAS1861-7 (Current)04/07/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1868 Pulley - (B.S.1 Chain, 8mm PitchAS1868-5 (Current)02/07/1943
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1865-1867 Distance Piece (Plain Bearing, Cable PulleysAS1865-3 (Current)02/07/1943
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4935-4946 Wire Thread Inserts (BSPF) Cadmium PlatedAS4935-5 (Current)01/01/2003
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4947 Wire Thread Inserts (BA, and BSF) Cad. PlatedAS4947-5 (Current)07/01/1990
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4948-4959 Wire Thread Inserts (B S P.F.) Cad. PlatedAS4948-5 (Current)07/01/1990
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4960 Rubber Pad - Control StopsAS4960-1 (Current)01/26/1961
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1871 Pulley - (B.S.6 Chain, 1/2" PitchAS1871-7 (Current)02/07/1943
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4901 Link Pin - FloatAS4901-3 (Current)04/07/1952
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS5339 Assy. of Accumulator Trough. 12V. 15A.HAS5339-1 (Current)11/01/1951
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS3041 Cage for Blind NutsAGS3041-1 (Current)11/02/1959
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS3045 Nut for A.G.S. 3042 CageAGS3045-1 (Current)11/02/1959
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS3048 Fitting Data for Avlock Blind NutsAGS3048-1 (Current)11/02/1959
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS3049 Pipe Couplings, Bleeder Screw, 1/4" U.N.FAGS3049-6 (Current)02/01/1992
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS3050-069 Rose Self Aligning Spherical Bearing Rod Ends. Unified Female SeriesAGS3050-3 (Current)11/01/1973
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8632 Self-Locking Nuts, Double Lug Floating Anchor. C.R. Steel, Silver Plated, 125,000lbf/in2 450°CAS8632-2 (Current)11/07/1966
This drawing specifies parts AS8632A, AS8632B, AS8632C, AS8632D, AS8632E, AS8632G, and AS8632J. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1299-1314 Adjuster Screw (Swaged on CableAS1299-2 (Current)06/16/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8611 Self-Locking Nuts, Single Long Lug Floating Anchor. Steel, Cad. Plated, 125,000lbs/sq.in. 250°CAS8611-4 (Current)06/10/1970
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2074 Bearing Insert - Pilot's Seat Raising GearAS2074-7 (Current)06/26/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2076 Press Button - Pilot's Seat Raising GearAS2076-4 (Current)06/26/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2077 Plunger Spring - Pilot's Seat Raising GearAS2077-5 (Current)06/26/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2082 Thin Castle Nut - Pilot's Seat Raising GearAS2082-3 (Current)06/26/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1965 Filler CapAS1965-6 (Current)06/01/1987
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1975 Cover, Inspection - Typical AssemblyAS1975-4 (Current)06/01/1987
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2006-2020 Ring, BoltAS2006-9 (Current)06/01/1987
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2026-2040 Washer, Joint (OuterAS2026-5 (Current)06/01/1987
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS2406 Pivot Screw (Filler CapAS2406-3 (Current)04/17/1944
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS6354 Seating for Filler CapAS6354-1 (Current)12/01/1955
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1267-1282 Eye End (Swaged on CableAS1267-2 (Current)06/15/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4902 Dowel - TubularAS4902-3 (Current)04/07/1952
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4903 Set ScrewAS4903-2 (Current)04/07/1952
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1315-1326 Eye End, for Chain (Swaged on CableAS1315-3 (Current)05/16/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1330-1384 3 CWT Cable and Swaged End Assembly CodeAS1330-4 (Current)12/04/2015
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS4907 Accumulator Trough 24V. 40AhAS4907-3 (Current)04/24/1952
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS1451-1516 10 CWT Cable and Swaged End Assembly CodeAS1451-4 (Current)06/16/1942
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8654 Self-Locking Nuts, Single, Long Lug Anchor. C.R. Steel, 125,000 lbf/in2 250°CAS8654-4 (Current)11/01/1973
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8656 Self-Locking Nuts, Miniature, Single, Short Lug Anchor. C.R. Steel, 125,000lbf/in2 250°CAS8656-4 (Current)11/01/1973
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8612 Self-Locking Nuts, Strip. Steel, Cad. Plated, 125,000lbs/sq.in. 250°CAS8612-5 (Current)06/10/1970
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8623 Self-Locking Nuts, Hexagon, Flange Type. C.R. Steel, Silver Plated, 125,000lbf/in2 450°CAS8623-2 (Current)11/07/1966
This drawing specifies parts AS8623A, AS8623B, AS8623C, AS8623D, AS8623E, AS8623G, and AS8623J. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AS8626 Self-Locking Nuts, Miniature Double Lug Anchor. C.R. Steel, Silver Plated. 125,000lbf/in2 450°CAS8626-2 (Current)11/07/1966
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS1651 Sleeves, Plain Cable, L.T. Type 1. Circular, No.1AGS1651-12 (Current)05/07/1963
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS1640 Guard for Feathering SwitchAGS1640-2 (Current)03/07/1946
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS1625 Sleeves, Bonding, Metal Braided Cable, H.T Outer, Curved with Union NutAGS1625-6 (Current)01/27/1944
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS1630 Sleeves, Bonding, Metal Braided Cable, H.T. 8.5 m/m Cable, InnerAGS1630-6 (Current)09/09/1937
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
AGS1635 Nut, Union, for L.T. CableAGS1635-5 (Current)02/13/1967
No scope available
Engine and Airframe Technical Standards Committee (TSC)
Technical Standard
Items per page:
1 – 50 of 212620