Advanced Search
of the following are true


Items (208,190)
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This ARP describes recommended sampling conditions, instrumentation, and procedures for the measurement of nonvolatile particle number and mass concentrations from the exhaust of aircraft gas turbine engines. Procedures are included to estimate sampling system loss performance. This ARP is not intended for in-flight testing, nor does it apply to engines operating in the afterburning mode. This ARP is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances
E-31P Particulate Matter Committee
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry
Engine Power Test Code Committee
This standard establishes the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators
ACBG Rolling Element Bearing Committee
This SAE Aerospace Standard (AS) establishes the minimum requirements for design and qualification of equipment identified as Gyroscopically Stabilized Magnetic Direction Instruments
A-4 Aircraft Instruments Committee
This SAE Aerospace Standard (AS) specifies minimum performance requirements for pressure altimeter systems other than air data computers. This document covers altimeter systems that measure and display altitude as a function of atmospheric pressure. The pressure transducer may be contained within the instrument display case or located remotely. Requirements for air data computers are specified in AS8002. Some requirements for nontransducing servoed altitude indicators are included in AS791. This document does not address RVSM requirements because general RVSM requirements cannot be independently detailed at the component level. The instrument system specified herein does not include aircraft pressure lines. Unless otherwise specified, whenever the term “instrument” is used, it is to be understood to be the complete system of pressure transducer components, any auxiliary equipment, and display components. The test procedures specified herein apply specifically to mechanical type
A-4ADWG Air Data Subcommittee
This SAE Aerospace Standard (AS) defines Minimum Performance Standards (MPS), qualification requirements, and minimum documentation requirements for side-facing seats in civil rotorcraft, transport aircraft, and general aviation aircraft. The goal is to achieve comfort, durability, and occupant protection under normal operational loads and to define test and evaluation criteria to demonstrate occupant protection when a side-facing seat/occupant/restraint system is subjected to statically applied ultimate loads and to dynamic test conditions set forth in Title 14, Code of Federal Regulations (CFR) Part 23, 25, 27, or 29. While this document addresses system performance, responsibility for the seating system is divided between the seat supplier and the installation applicant. The seat supplier’s responsibility consists of meeting all the seat system performance requirements and obtaining and supplying to the installation applicant all the data prescribed by this document. The
Aircraft Seat Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This specification establishes the qualification and acceptance limits for aeronautical engine low tension spark igniters
E-30 Propulsion Ignition Systems Committee
This specification covers the general requirements for integrally illuminated information panels
A-20A Crew Station Lighting
This procurement specification covers studs made from a corrosion and heat resistant age hardenable iron base alloy of the type identified under Unified Numbering System as UNS S66286 and of 130 ksi tensile strength at room temperature, with maximum test temperature of parts at 1200 °F
E-25 General Standards for Aerospace and Propulsion Systems
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
The Nickel Cadmium battery covered by this Aerospace Standard is the type which is generally, although not exclusively, used for engine starting purposes in turbine-powered aircraft and/or on aircraft with turbine type Auxiliary Power Units. This turbine starting function requires high power delivery rates from the battery for 15 to 30 seconds or more for each engine start. This same battery may also be used at lower power delivery rates, as the final redundant source of emergency electrical energy for the operation of essential flight equipment for required periods of 30 to 60 minutes. The battery generally consists of a group of plastic jarred cells contained within an enclosing battery case. They are electrically connected in series with each other and usually terminate in an electrical connector mounted in the case front wall. The battery case may be secured to the aircraft structure by any of a number of clamping techniques. The outer or battery case is ventilated to purge it of
AE-7B Power Management, Distribution and Storage
This specification covers general design and performance requirements for the mobility of towed ground support equipment. The complete mobility requirements for an item of towed aerospace ground equipment not specified herein shall be specified in the individual equipment specification (see 6.4
AGE-3 Aircraft Ground Support Equipment Committee
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
AE-7A Generators and Controls Motors and Magnetic Devices
Items per page:
1 – 50 of 208190