Results
This SAE Aerospace Standard (AS) establishes the requirements for straight threaded boss or flanged fluid connection fittings (see Section 6) for use in all types of fluid systems
This AIR presents an abbreviated review of the metallurgical phenomena known as whiskers. It is not all encompassing; rather, it is intended to introduce the design engineer to the technical issues of metallic whiskers, their formation, and the potentially dangerous problems they can cause
This SAE Aerospace Standard (AS) covers medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for operation in pneumatic systems up to 800 °F with excursion to 1200 °F for Class “B” and “N” and primarily for use on jet aircraft power plants. See 1.2.1 for recommended usage
This SAE Recommended Practice (RP) provides test procedures for air braked trucks and truck-tractors used to tow single and multiple trailer combinations on highways. This RP is not intended for off-highway applications
This SAE Aerospace Recommended Practice (ARP) provides to the aerospace industry a procedure for the consistent and accurate calculation of fuel flow using turbine flowmeters during development, production, and post overhaul/repair gas turbine engine testing
This SAE Aerospace Recommended Practice (ARP) establishes a method for evaluating the particulate matter extracted from the working fluid of a hydraulic system or component using a membrane. The amount of particulate matter deposited on the membrane due to filtering a given quantity of fluid is visually compared against a standard membrane in order to provide an indication of the cleanliness level of the fluid
This SAE Recommended Practice provides instructions and test procedures for air braked trailers and dollies used in single and multiple trailer combinations on highway. This document is not intended for off-highway application
This SAE Recommended Practice establishes minimum performance requirements for trucks, buses, truck-tractors, full trailers, and semitrailers with gross vehicle weight ratings greater than 4540 kg (10 000 lb) with regard to: a Vehicle classification b Vehicle load c Percent grade d Application force
This SAE Performance Criteria code applies to vehicles that are tested in accordance with SAE J1729 and SAE J1626
This specification covers an aircraft-quality, low-alloy steel in the form of seamless mechanical tubing
This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, high conductive, self-bonding coupling assembly which, when installed on defined ferrules, provides a flexible connection for joining ducting and components in pressurized fluid systems. The assembled coupling is designed to provide interchangeability of parts and components between qualified manufacturers for use from -65 to +265 °F at 130 psi nominal operating pressures and for the service life of the aircraft system. FAR 23.954, FAR 25.603, FAR 25.605, FAR 25.609, FAR 25.613, FAR 25.901, FAR 25.954, and FAR 25.981 certification requirements have identified the need for high-current capable flexible fluid assembled couplings. The coupling assembly does not require inspection or maintenance to remain current capable for the life of the aircraft. This specification provides two test philosophies necessary for low-pressure couplings: 1 Electromagnetic effects/lightning testing of assembled couplings to
This specification covers an aluminum alloy in the form of sheet and plate 0.051 to 8.000 inches (1.30 to 203.20 mm), inclusive, in thickness (see 8.5
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings
This specification covers fuel-resistant, two-component polysulfide synthetic rubber compounds which cure at room temperature
With many corporations and suppliers conducting development and validation tests at different climatic wind tunnel sites, there is an increasing need for a recommended best practice that defines a process by which climatic wind tunnels can be correlated. This document addresses the test methods and metrics used to correlate results from different facilities, independent of location, for heating ventilation and air conditioning (HVAC) and powertrain cooling (PTC) development. This document should be used as a guideline to make sure key aspects of tunnel testing are covered when comparing various climatic wind tunnel facilities. The depth of the correlation program is ultimately influenced by program objectives; therefore, a correlation program, for the intent and purposes of this document, can range from just a few tests to a full analysis that involves multiple vehicle tests identifying limitations and statistical boundaries. Using recommendations in this document will eliminate most
This specification covers a corrosion- and heat-resistant steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings
This specification covers a low-alloy steel in the form of wire supplied as coils, spools, and straight lengths
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings
This document is intended for use during audits to the requirements of AS5553C. It may be used by all contracting organizations that procure EEE parts, whether such parts are procured directly or integrated into electronic assemblies or equipment as guidance for evaluating compliance to AS5553C
This drawing specifies parts AS20905, AS20906, AS20907, AS20908, AS20909, AS20910, AS20911, AS20912, AS20913, AS20914, AS20915, AS20916, AS20917, AS20918, AS20919, AS20920, AS20921, AS20922, AS20923, AS20924, AS20925, AS20926, AS20927, AS20928, AS20929, AS20930, AS20931, AS20932, AS20934, AS20936, AS20938, AS20940, AS20942, AS20944, AS20946, AS20948, AS20950, AS20952, AS20954, AS20956, AS20958, AS20960, and AS20962. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry
This specification covers disinfectants or chemicals for use in disinfecting aircraft after carrying livestock
To document test procedures and setups that address known failure modes for Accessory Drive automatic tensioners. This SAE Standard does not encompass the pulley or pulley bearing. The sample sizes and acceptance criteria should be determined by agreement between the original equipment manufacturer (OEM) and the supplier. The failure modes to be addressed are: Test Factors include: NOTE: The Belt Drive Committee recommends that this spec be run using test parts that are close to the upper and lower specifications for load output and damping (tails testing
This SAE Recommended Practice describes an empirical method for determining the theoretical ash content of aviation piston engine lubricating oils by calculating the equivalent weight of metallic oxides formed at 775 °C based on the metallic elemental concentration. The calculation method of ash determination may be used as an alternate to ASTM D 482 for application to the standards for aviation piston engine lubricating oils
This document is written to address acceleration and deceleration control issues related to heavy-duty trucks and buses greater than 10000 GVW
This specification covers an aluminum bronze alloy in the form of bars, rods, shapes, tubes, forgings, and forging stock (see 8.5
Items per page:
50
1 – 50 of 212842