Search
Advanced Search
of the following are true

Results

Items (208,211)
This specification covers a magnesium alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This SAE Aerospace Recommended Practice (ARP) provides recommended use and installation procedures for bonded cable harness supports
AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install
AS22759 specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy as specified in the applicable detail specification. The fluoropolymer insulation may be polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVF2), ethylene-tetrafluoroethylene copolymer (ETFE), or other Fluoropolymer resin. The fluoropolymer may be used alone or in combination with other insulation materials. These abbreviations shall be used herein. When a wire is referenced herein, it means an insulated conductor (see 7.7
AE-8D Wire and Cable Committee
This SAE Aerospace Recommended Practice (ARP) provides a framework for establishing methods and stakeholder responsibilities to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, in-flight entertainment equipment, etc.) meet the seat technical standard order (TSO) minimum performance standards (MPS). These agreements will allow seat suppliers to build and ship TSO-approved seats with integrated electronic components. The document presents the roles and accountabilities of the electronics manufacturer (EM), the seat supplier, and the TC/ATC/STC applicant/holder in the context of AC 21-49, Section 7.b (“Type Certification Using TSO-Approved Seat with Electronic Components Defined in TSO Design”). This document applies to all FAA seat TSOs C39( ), C127( ), etc. The document defines the roles and responsibilities of each party involved in the procurement of electronics, their integration on a TSO-approved seat, and the
Aircraft Seat Committee
This SAE Aerospace Information Report (AIR) is a process verification guide for evaluating implementation of key factors in repair of fiber reinforced composite bonded parts or assemblies in a repair shop, hangar, or on-wing environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair and is intended to promote consistency and reliability
AMS CACRC Commercial Aircraft Composite Repair Committee
The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14
Cranes and Lifting Devices Committee
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15
Cranes and Lifting Devices Committee
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet and strip up to 0.187 inch (4.75 mm) thick, inclusive, and plate up to 4.000 inches (101.6 mm) thick, inclusive
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a copper-nickel-tin alloy in the form of castings, made using the investment process unless sand or centrifugal processes are agreed upon by the purchaser (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers pyrometric requirements for equipment used for the thermal processing of metallic materials. Specifically, it covers temperature sensors, instrumentation, thermal processing equipment, correction factors and instrument offsets, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s
AMS B Finishes Processes and Fluids Committee
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This specification establishes acceptance criteria for discontinuities revealed by magnetic particle inspection of parts made from wrought, ferromagnetic materials
AMS B Finishes Processes and Fluids Committee
This specification defines the procedures and requirements for joining metals and alloys using the electron-beam (EB) welding process
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys using gold-nickel alloy filler metal
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for electrodeposed lead on metal parts
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectural applications (see 6.1
AMS B Finishes Processes and Fluids Committee
This specification defines the procedures and requirements for joining metals and alloys using the electron beam welding process
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for gas-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers the different types of passivation treatments as well as recommendations, guidance and precautions for cleaning and descaling corrosion-resistant parts, components, equipment and systems
AMS B Finishes Processes and Fluids Committee
This specification covers procedure requirements for shot peening of metal parts, to induce residual compressive stresses in specified surfaces, for the purpose of improving resistance to fatigue, stress corrosion cracking, and galling (see 6.1
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements of inhibited 1,1,1 trichloroethane for vapor degreasing
AMS B Finishes Processes and Fluids Committee
This specification covers a pigment material in the form of a paste comprising aluminium powder mixed in a suitable binder
AMS B Finishes Processes and Fluids Committee
The specification covers cast iron or hardened cast steel grit and shot for blast cleaning of castings, forgings, ship hulls and decks, or other parts prior to use for the removal of sand, slag, rust, and marine incrustations; and also cast iron or hardened cast steel shot, or cut steel wire shot for peening the surface of metals
AMS B Finishes Processes and Fluids Committee
This specification covers a stable, nonvolatile, petroleum-base compound in a form suitable for application by dipping at 170 to 210 °F (77 to 99 °C
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers a solvent-dispersed, corrosion-inhibiting compound packaged in aerosol cans
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for an aluminum brazing flux in the form of powder or paste
AMS B Finishes Processes and Fluids Committee
This specification covers requirements for resistance spot and seam welding of the following metals and their alloys. Group 1 - Aluminum and magnesium Group 2 - Iron, nickel, and cobalt Group 3 - Titanium
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for gas-pressure leak testing of parts. AMS 2604 is the inch/pound version of this MAM
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for gas-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for hydraulic-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials and the surfaces of aluminum and aluminum alloys. This specification is intended specifically to provide components of military weapon systems with maximum corrosion resistance. The coating also provides a surface having better paint adhesion than uncoated aluminum. It is not intended as a general purpose coating for commercial and decorative applications, (see 6.1
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice applies to cranes in lifting crane service which are equipped with two-block warning, limiting, and/or damage prevention systems
Cranes and Lifting Devices Committee
This document applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if the load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. This recommended practice applies to all mechanical, hydraulic, and electric powered hoist mechanisms
Cranes and Lifting Devices Committee
This SAE Standard applies to cranes when used in lifting service that are equipped with Rated Capacity Systems
Cranes and Lifting Devices Committee
This SAE Standard applies to cranes which are equipped to adjust the boom angle by hoisting and lowering means through rope reeving
Cranes and Lifting Devices Committee
This SAE Recommended Practice applies to cranes equipped with load indicating devices used in lifting crane service
Cranes and Lifting Devices Committee
This SAE Recommended Practice applies to cranes used in lifting-crane service which are equipped with radius-of-load or boom angle indicating devices
Cranes and Lifting Devices Committee
This SAE Recommended Practice applies to the boomstop for the main boom of all mobile construction type cranes having rope supported booms, equipped for hook work, clamshell, magnet, grapple, or concrete bucket attachments
Cranes and Lifting Devices Committee
This SAE Standard applies to all mobile, construction-type, lifting cranes as equipped for operation with hook, clamshell, magnet, and grapple attachments. It is not applicable to excavating and demolition attachments such as shovels, hoes, draglines, and wrecking balls. The purpose of this document is to set forth wire-rope strength factors that have been proved by design and operating practice to be consistent with safety, economy, space, weight, and other requirements peculiar to mobile, construction-type, lifting cranes
Cranes and Lifting Devices Committee
This SAE Standard includes names of major components and parts peculiar to this type of equipment. The illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanisms and to identify useful dimensional relationships
Cranes and Lifting Devices Committee
This SAE Aerospace Recommended Practice (ARP) provides a framework for establishing methods and stakeholder responsibilities to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, inflight entertainment equipment, etc.) meet the seat TSO minimum performance standard. These agreements will allow seat suppliers to build and ship TSO-approved seats with integrated electronic components. The document presents the roles and accountabilities of the electronics manufacturer (EM), the seat supplier, and the TC/ATC/STC applicant/holder in the context of AC 21-49 Section 7.b (“Type Certification Using TSO-Approved Seat with Electronic Components Defined in TSO Design”). This document applies to all FAA seat TSOs C39( ), C127( ), etc. The document defines the roles and responsibilities of each party involved in the procurement of electronics, their integration on a TSO-approved seat, and the seat’s installation on an aircraft
Aircraft Seat Committee
This SAE Recommended Practice applies to mobile, construction type, crane and cable excavator hand and foot controls. It should not be construed to limit the use of, or to apply to combination controls, automatic controls, or any other special operating control requirements
Cranes and Lifting Devices Committee
This recommended practice specifies criteria for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails and entrance openings which permit access to and from operator, inspection or maintenance platforms on mobile cranes parked in accordance with the manufacturer’s instruction. It also presents requirements for guards and restraints as related to moving parts
Cranes and Lifting Devices Committee
Items per page:
1 – 50 of 208211