Search
Advanced Search
of the following are true
(
)

Results

Items (211,955)
This SAE Aerospace Recommended Practice (ARP) provides methods and guidelines for isolating dissimilar repair patch materials from carbon fiber reinforced plastic (herein also referred to as carbon composite) structure during a repair operation.
AMS G9 Aerospace Sealing Committee
This SAE Aerospace Recommended Practice (ARP) provides information and recommended guidelines for handling carry-on baggage prior to emergencies and during the emergency evacuation of transport category aircraft. Recommendations are provided on limiting the size, amount, and weight of carry-on baggage brought into the cabin, improved stowage of carry-on baggage to minimize hazards to passengers in flight and during emergency evacuations, and procedures to ensure carry-on baggage is not removed during an emergency evacuation.
S-9B Cabin Interiors and Furnishings Committee
Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.
E-25 General Standards for Aerospace and Propulsion Systems
This Standard defines a machine coordinate system and machine motion nomenclature for numerically controlled machines. This Standard applies to all numerically controlled machines. For the sake of simplicity, the majority of the text of this Standard is written in terms which are applicable to machine tools but it is nevertheless applicable to numerically controlled machines in general.
Systems Management Council
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
AGE-2 Air Cargo
This report presents the material properties and test requirements for an injection molded thermoplastic compound utilized for fabrication of AS1396 clamp block assembly.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This document summarizes types of heat sinks and considerations in relation to the general requirements of aircraft heat sources, and it provides information to achieve efficient utilization and management of these heat sinks. In this document, a heat sink is defined as a body or substance used for removal of the heat generated by thermodynamic processes. This document provides general data about airborne heat sources, heat sinks, and modes of heat transfer. The document also discusses approaches to control the use of heat sinks and techniques for analysis and verification of heat sink management. The heat sinks are for aircraft operating at subsonic and supersonic speeds.
AC-9 Aircraft Environmental Systems Committee
This specification covers the general requirements that are common to most hydraulic components (see 6.2), used in aeronautical hydraulic systems (see 6.1).
A-6A2 Military Aircraft Committee
This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
AMS CACRC Commercial Aircraft Composite Repair Committee
This recommended practice is intended to recommend the basic shapes and dimensions for knobs used in aircraft. Two basic types of knobs, the bar shape and the round shape, are described, as well as several widely used variations of these two basic shapes.
A-20A Crew Station Lighting
The technical architecture defined in this document outlines mandatory, emerging, and needed standards to provide interoperability at key interfaces in the aircraft/store system (including an associated NATO Network Enabled Capability environment), as required to support a future plug-and-play aircraft/store integration capability. These standards relate to services and protocols associated with the subject interfaces. Modeling standards to facilitate the Model Driven Architecture® (MDA®) approach to system definition and implementation are also included. Note that the status of referenced standards as reflected in this document is as of August 2007, and document users should check to see if there has been a subsequent change of status relative to applicable standards.
AS-1B Aircraft Store Integration Committee
This specification relates to Synchros, 60 and 400 Hz. It is not complete in itself, but shall be used in conjunction with MIL-DTL-81963, in which the latter shall be recognized as forming an inherent part of this specification. This standard requires a Qualified Products List (see 6.4).
AE-7A Generators and Controls Motors and Magnetic Devices
This SAE Aerospace Standard (AS) shall be used in conjunction with AMS4946 to provide requirements for qualification testing and for qualified products listing (QPL) and qualified manufacturer listing (QML) for Ti-3Al-2.5V cold worked and stress relieved hydraulic system tubing. The basic tubing shall comply with the requirements of AMS4946.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This SAE Aerospace Recommended Practice (ARP) specifies a series of balancing machine proving rotors and related test weights as directly required for the evaluation of gas turbine rotor balancing machines.
EG-1A Balancing Committee
This SAE Aerospace Information Report (AIR) supplements ARP4754A by identifying the crucial elements to be considered when constructing the development assurance plans described in Chapter 3 (Development Planning) of ARP4754A for integrated systems. This AIR presents a collection of lessons learned from past certification programs involving integrated systems. This AIR is not guidance for system integration technologies.
S-18 Aircraft and Sys Dev and Safety Assessment Committee
The starters covered by this specification shall be designed to operate on compressed air from ground support equipment, engine interbleed or on board air supply, for the purpose of starting aircraft jet engines.
AE-6 Starting Systems and Auxiliary Power Committee
The intent of this SAE Aerospace Information Report (AIR) is to inform the aerospace industry about various systems available to monitor the inflation pressure and/or temperature of an aircraft tire. The tire pressure monitoring system (TPMS), with cockpit display, is the most widely used of all aircraft tire monitoring systems, and is detailed in this document more than other systems.
A-5 Aerospace Landing Gear Systems Committee
This Aeronautical Standard covers four (4) basic types of direct indicating instruments as follows: TYPE I - Range 0-2000 feet per minute climb and descent TYPE II - Range 0-3000 feet per minute climb and descent TYPE III - Range 0-4000 feet per minute climb and descent TYPE IV - Range 0-6000 feet per minute climb and descent
A-4 Aircraft Instruments Committee
CLARA identifies four functions: Data Space Generator, Truth Data Generator, Coefficient Generator, and Reconstructor. Together these four functions standardize the solution to the LAR problem. This ICD defines the logical interfaces of the four functions.
AS-1B Aircraft Store Integration Committee
This SAE Aerospace Standard (AS) defines the editorial format and policies necessary for the publication of Interface Control documents. The Common Interface Control Document Format Standard defines a common format for aircraft/store interface documents to foster increased interoperability. It is designed with the versatility to serve differing “ICD” philosophies and organizations. This aerospace standard defines the common technical data sections for the Common Interface Control Document Format down to the third header level for the majority of sub-sections. The Common Interface Control Document Format Aerospace Standard provides a structured document format in appendixes supported by example paragraphs, drawings, etc.
AS-1B Aircraft Store Integration Committee
This SAE Aerospace Recommended Practice (ARP) covers all types of ground support equipment required to support civil transport aircraft.
AGE-3 Aircraft Ground Support Equipment Committee
This SAE Aerospace Information Report (AIR) has been prepared by a panel of the SAE A-5A Committee and is presented to document the design approaches and service experience from various applications of antiskid systems. This experience includes commercial and military applications.
A-5A Wheels, Brakes and Skid Controls Committee
This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.
AGE-2 Air Cargo
Items per page:
1 – 50 of 211955