Advanced Search
of the following are true


Items (208,402)
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet and strip up to 0.187 inch (4.75 mm) thick, inclusive, and plate up to 4.000 inches (101.6 mm) thick, inclusive
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a copper-nickel-tin alloy in the form of castings, made using the investment process unless sand or centrifugal processes are agreed upon by the purchaser (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers pyrometric requirements for equipment used for the thermal processing of metallic materials. Specifically, it covers temperature sensors, instrumentation, thermal processing equipment, correction factors and instrument offsets, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s
AMS B Finishes Processes and Fluids Committee
This SAE Aerospace Recommended Practice (ARP) provides a framework for establishing methods and stakeholder responsibilities to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, in-flight entertainment equipment, etc.) meet the seat technical standard order (TSO) minimum performance standards (MPS). These agreements will allow seat suppliers to build and ship TSO-approved seats with integrated electronic components. The document presents the roles and accountabilities of the electronics manufacturer (EM), the seat supplier, and the TC/ATC/STC applicant/holder in the context of AC 21-49, Section 7.b (“Type Certification Using TSO-Approved Seat with Electronic Components Defined in TSO Design”). This document applies to all FAA seat TSOs C39( ), C127( ), etc. The document defines the roles and responsibilities of each party involved in the procurement of electronics, their integration on a TSO-approved seat, and the
Aircraft Seat Committee
AS22759 specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy as specified in the applicable detail specification. The fluoropolymer insulation may be polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVF2), ethylene-tetrafluoroethylene copolymer (ETFE), or other Fluoropolymer resin. The fluoropolymer may be used alone or in combination with other insulation materials. These abbreviations shall be used herein. When a wire is referenced herein, it means an insulated conductor (see 7.7
AE-8D Wire and Cable Committee
This SAE Aerospace Recommended Practice (ARP) provides recommended use and installation procedures for bonded cable harness supports
AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install
This specification covers a magnesium alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15
Cranes and Lifting Devices Committee
The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14
Cranes and Lifting Devices Committee
This SAE Aerospace Information Report (AIR) is a process verification guide for evaluating implementation of key factors in repair of fiber reinforced composite bonded parts or assemblies in a repair shop, hangar, or on-wing environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair and is intended to promote consistency and reliability
AMS CACRC Commercial Aircraft Composite Repair Committee
This SAE Aerospace Recommended Practice (ARP) applies to landing gear structures and mechanisms (excluding wheels, tires, and brakes and other landing gear systems) for all types and models of civil and military aircraft. All axles, wheel forks, links, arms, mechanical and gas/oil shock struts, downlock and uplock assemblies, braces, trunnion beams, and truck beams, etc., that sustain loads originating at the ground, and that are not integral parts of the airframe structure, should be designed and validated in accordance with this document. Hydraulic actuators (retraction, main and nose gear steering, positioning, damping, etc.) should also be included in this coverage. System level, non-structural components such as retraction/extension valves, controllers, secondary structure and mechanisms in the airframe (e.g., manual release mechanisms, slaved doors) as well as equipment that is located in the cockpit are not addressed in this ARP
A-5B Gears, Struts and Couplings Committee
This SAE Aerospace Information Report (AIR) identifies the risks and dangers associated with the carriage and use of pyrotechnic signaling devices in transport category aircraft life rafts and slide/rafts, and provides a rationale for allowing the use of alternative non-pyrotechnic devices authorized by FAA/TSO-C168. These devices offer an equivalent level of safety while eliminating flight safety risks, enhancing survivability of aircraft ditching survivors, reducing costs, eliminating dangerous goods transportation and handling issues, and reducing environmental impact of dangerous goods disposal
S-9A Safety Equipment and Survival Systems Committee
The purposeful integration of existing and emerging technologies into CM practice will enable collaboration with supporting systems and provide stakeholders access to authoritative and trusted data in a timely fashion at their desktop to help drive educated decision making. This lays to rest the misguided myth that CM and supporting systems operate at cross-purposes. What does it mean to have CM in a world of new initiatives and 2-week sprints (i.e., time-boxed work periods), multiple increments producing Minimum Viable Products (MVP) and synchronized with Model Based Systems Engineering (MBSE) while being digitally transformed? MBSE initiatives drive the jump from “2D” data to “3D” data, thereby becoming a Model-Centric practice. Products now enable technology to push the product lifecycle management process to new levels of efficiency and confidence. This mindset is evidenced by five major functions of CM, as discussed below, and described in EIA-649C
G-33 Configuration Management
This document provides preliminary1 safety-relevant guidance for in-vehicle fallback test driver training and for on-road testing of vehicles being operated by prototype conditional, high, and full (Levels 3 to 5) ADS, as defined by SAE J3016. It does not include guidance for evaluating the performance of post-production ADS-equipped vehicles. Moreover, this guidance only addresses testing of ADS-operated vehicles as overseen by in-vehicle fallback test drivers (IFTD). These guidelines do not address: Remote driving, including remote fallback test driving of prototype ADS-operated test vehicles in driverless operation. (Note: The term “remote fallback test driver” is included as a defined term herein and is intended to be addressed in a future iteration of this document. However, at this time, too little is published or known about this type of testing to provide even preliminary guidance.) Testing of driver support features (i.e., Levels 1 and 2), which rely on a human driver to
On-Road Automated Driving (ORAD) Committee
This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483. Purpose The purpose of this document is to provide a uniform method for calculating the SAE rated volumetric capacity
MTC1, Earthmoving Machinery
This standard applies only to straight, angling, semi-U, and U-blades for crawler and wheel tractors. It applies to angling blades only in the straight (not angled) position. This standard does not apply to angled blades or other tools used to side cast materials, nor does it apply to any blade with design features such as end plates extended beyond the blade face. This standard assumes the blade face to be flat and vertical, and does not consider the blade included volume (Figure 1). Although provisions are presented for some deviations, this standard is intended for rectangular blades whose width/height ratios are at least 1.0. Purpose The purpose of this standard is to provide a uniform method for calculating the capacities of dozer blades. It is intended for relative comparisons of dozer blade capacity, and not for predicting capacities or productivities in actual field conditions. Such determinations would need to consider other parameters, such as efficiency of the blade design
MTC1, Earthmoving Machinery
The scope of this document is a technology-neutral approach to speech input and audible output system guidelines applicable for OEM and aftermarket systems in light vehicles. These may be stand-alone interfaces or the speech aspects of multi-modal interfaces. This document does not apply to speech input and audible output systems used to interact with automation or automated driving systems in vehicles that are equipped with such systems while they are in use (ref. J3016:JAN2014
Driver Vehicle Interface (DVI) Committee
This is applicable to pipelayers and side booms, mounted on tractors or loaders defined in SAE J1057. Only those terms not covered by SAE J1234 are described herein. Purpose The purpose of this standard is to establish identification terminology and specification definitions for pipelayers and side booms, tractor or loader mounted
MTC1, Earthmoving Machinery
This standard covers self-propelled off-road work machines as categorized in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390
MTC1, Earthmoving Machinery
This SAE Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled material handlers, pedestal mounted material handlers and their equipment as defined in 3.1. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. (Material handlers share many design characteristics with hydraulic excavators and log loaders; primarily 360 degree continuous rotation of the upperstructure relative to the undercarriage or mounting. They differ in their operating application. Material handlers are used for the handling of scrap material and normally utilize grapples or magnets. Hydraulic excavators are used for the excavation of earth, gravel and other loose material utilizing a bucket. Log loaders are used for the handling of logs and trees and normally utilize
MTC1, Earthmoving Machinery
This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip
MTC1, Earthmoving Machinery
This SAE Standard specifies a procedure for approximating the volume of typical materials contained in the bowl of Open Bowl scrapers as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application
MTC1, Earthmoving Machinery
This SAE Recommended Practice defines machines equipped with forks for material handling, which are intended for use on unimproved or disturbed terrain. (Reference J1116, Categories 1, 2 or 6.) Purpose To identify types of machines, which use forks as working tools, while being used on unimproved surfaces. The machines are grouped as follows: loaders/tractors with forks and rough terrain forklifts. These groupings are used in identifying the organization responsible for applicable standards
MTC1, Earthmoving Machinery
This SAE Recommended Practice provides guidelines for the use, performance, installation, activation, and switching of marking lamps on ADS-equipped vehicles
Signaling and Marking Devices Stds Comm
The SAE J1939 documents are intended for light-, medium-, and heavy-duty vehicles used on or off road, as well as appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include, but are not limited to, on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow electronic control units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-22, describes the data link layer using the flexible data rate as defined in ISO 11898-1, December 2015. The flexible data rate capability in CAN (commonly called CAN FD) is implemented as a transport layer in order to allow for functional safety, cybersecurity, extended transport capability, and backward compatibility with SAE J1939DA
Truck Bus Control and Communications Network Committee
This document applies to all hydraulic excavators and backhoes that are either crawler mounted or rubber tire mounted, with or without outrigger members, identified in SAE J1116 as earthmoving machines and defined in SAE J/ISO 6165. Purpose This document is to provide a uniform method of determining digging forces for hydraulic excavators and backhoes
MTC1, Earthmoving Machinery
This standard sets forth accepted terminology to name and identify types of earthmoving machines, and is based upon existing commercial earthmoving machines. Illustrations are used to identify functional characteristics. The terminology establishes a name for a basic work machine such that it is not renamed when various components are mounted to it. For example, when a dozer is mounted on a 'tractor', the work machine can be referred to as 'tractor with dozer
MTC1, Earthmoving Machinery
This document describes [motor] vehicle driving automation systems that perform part or all of the dynamic driving task (DDT) on a sustained basis. It provides a taxonomy with detailed definitions for six levels of driving automation, ranging from no driving automation (Level 0) to full driving automation (Level 5), in the context of [motor] vehicles (hereafter also referred to as “vehicle” or “vehicles”) and their operation on roadways: Level 0: No Driving Automation Level 1: Driver Assistance Level 2: Partial Driving Automation Level 3: Conditional Driving Automation Level 4: High Driving Automation Level 5: Full Driving Automation These level definitions, along with additional supporting terms and definitions provided herein, can be used to describe the full range of driving automation features equipped on [motor] vehicles in a functionally consistent and coherent manner. “On-road” refers to publicly accessible roadways (including parking areas and private campuses that permit
On-Road Automated Driving (ORAD) Committee
This standard is applicable to off-road work machines, base machine and its equipment, included in categories 1.1, 1.2, 2, 3, and 5 of J1116. Purpose This standard defines dimensional, mass, and performance terms
MTC1, Earthmoving Machinery
This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted
MTC1, Earthmoving Machinery
This SAE Standard applies to all machines with shovel, clam, or dragline attachment
MTC1, Earthmoving Machinery
This standard is for cutting edge sections typically used in earth-moving machinery defined in SAE J1116 and ISO 6165: a Scrapers as defined in ISO 7133. b Dozers as described in ISO 6747. c Loaders as described in ISO 7131. d Graders as described in ISO 7134. Hole spacing is defined ISO 7129. Hole conformation is defined in SAE J740
MTC1, Earthmoving Machinery
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors
MTC1, Earthmoving Machinery
This SAE Recommended Practice covers design and evaluation of the entire gasoline filler pipe assembly used on cars and light trucks with respect to compliance with CARB (California Air Resources Board) LEV II (meeting or exceeding EPA Tier 2 and EU Stage-5 evaporative emissions requirements). It is limited to an assembly which is joined to the fuel tank using either a hose, Quick Connect Coupling, or a grommet type sealing device. The Design Practice covers the filler cap, filler pipe, filler pipe assembly to tank hose, and filler pipe assembly to tank grommet or spud. It includes recommendations for design of components and assemblies intended to perform successfully in evaporative emission SHED (Sealed Housing for Evaporative Determination) tests, based on best practices known at the time of release
Fuel Systems Standards Committee
This procedure is applicable to brake pad modes between 500 Hz and 16 kHz. The parameters measured with this procedure are defined as the first three natural frequencies, fn (n = 1, 2, 3), and the corresponding loss factors, η
Brake NVH Standards Committee
This SAE Recommended Practice defines a procedure for the use of computer generated saturation curves to determine peening intensity. Calculation of intensity within a tolerance band for each data set in Table 1 one is required for compliance with this practice
Surface Enhancement Committee
Because of the intense focus on CAFE and fuel emission standards, optimization of the automobile drivetrain is imperative. In light of this, component efficiencies have become an important factor in the drivetrain decision-making process. It has therefore become necessary to develop a universal standard to judge transmission efficiency. This SAE Recommended Practice specifies the dynamometer test procedure which maps a manual transmission’s efficiency. The document is separated into two parts. The first compares input and output torque throughout a specified input speed range in order to determine “in-gear” transmission efficiency. The second procedure measures parasitic losses experienced while in neutral at nominal idling speeds and also churning losses while in gear. The application of this document is intended for passenger car and light truck. All references to transmissions throughout this document include transaxles
SAE IC Powertrain Steering Committee
This SAE Standard provides a uniform method for calculating and specifying swing performance characteristics of hydraulic excavators as defined in SAE J1057
MTC1, Earthmoving Machinery
This SAE Aerospace Recommended Practice (ARP) addresses the general procedure for the best practices for minimizing uncertainty when calibrating thermal conductivity and cold cathode vacuum gauges, which includes the vacuum sensor(s) and accompanying electronics necessary for a pressure measurement to be made. It also includes the best practices for an in-process verification where limitations make it impossible to follow the best practices for minimizing uncertainty. Verifying the accuracy and operation of vacuum gauges is critical to ensure the maintenance of processes while under vacuum
AMS B Finishes Processes and Fluids Committee
This specification establishes the engineering requirements for producing an acid-type, anodic coating on magnesium alloys and the properties of the coating
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for vacuum deposited cadmium
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for ion vapor deposited (IVD) aluminum on steel, titanium, and aluminum alloys
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 208402