Search
Advanced Search
of the following are true

Results

Items (208,252)
This specification covers pyrometric requirements for equipment used for the thermal processing of metallic materials. Specifically, it covers temperature sensors, instrumentation, thermal processing equipment, correction factors and instrument offsets, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s
AMS B Finishes Processes and Fluids Committee
AS22759 specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy as specified in the applicable detail specification. The fluoropolymer insulation may be polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVF2), ethylene-tetrafluoroethylene copolymer (ETFE), or other Fluoropolymer resin. The fluoropolymer may be used alone or in combination with other insulation materials. These abbreviations shall be used herein. When a wire is referenced herein, it means an insulated conductor (see 7.7
AE-8D Wire and Cable Committee
This SAE Aerospace Recommended Practice (ARP) provides a framework for establishing methods and stakeholder responsibilities to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, in-flight entertainment equipment, etc.) meet the seat technical standard order (TSO) minimum performance standards (MPS). These agreements will allow seat suppliers to build and ship TSO-approved seats with integrated electronic components. The document presents the roles and accountabilities of the electronics manufacturer (EM), the seat supplier, and the TC/ATC/STC applicant/holder in the context of AC 21-49, Section 7.b (“Type Certification Using TSO-Approved Seat with Electronic Components Defined in TSO Design”). This document applies to all FAA seat TSOs C39( ), C127( ), etc. The document defines the roles and responsibilities of each party involved in the procurement of electronics, their integration on a TSO-approved seat, and the
Aircraft Seat Committee
This SAE Aerospace Recommended Practice (ARP) provides recommended use and installation procedures for bonded cable harness supports
AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install
This specification covers a magnesium alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This specification covers a copper-nickel-tin alloy in the form of castings, made using the investment process unless sand or centrifugal processes are agreed upon by the purchaser (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet and strip up to 0.187 inch (4.75 mm) thick, inclusive, and plate up to 4.000 inches (101.6 mm) thick, inclusive
AMS F Corrosion and Heat Resistant Alloys Committee
This SAE Aerospace Information Report (AIR) is a process verification guide for evaluating implementation of key factors in repair of fiber reinforced composite bonded parts or assemblies in a repair shop, hangar, or on-wing environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair and is intended to promote consistency and reliability
AMS CACRC Commercial Aircraft Composite Repair Committee
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15
Cranes and Lifting Devices Committee
The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14
Cranes and Lifting Devices Committee
This specification covers an aluminum welding flux in the form of powder
AMS B Finishes Processes and Fluids Committee
This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS
G-32 Cyber Physical Systems Security Committee
This brief User Guide recaps the content of the AS6518B UCS Architectural Model. The purpose of the UCS Architecture Model is to provide the authoritative source for other models and products within the UCS Architecture as shown in the AS6512B UCS Architecture: Architecture Description
AS-4UCS Unmanned Systems Control Segment Architecture
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This standard establishes the requirements for performing and documenting FAI. It is emphasized the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry
Engine Power Test Code Committee
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties
Fuel and Lubricants TC2 Industrial Lubricants
This specification covers the requirements for brush plating of tin-zinc by electrodeposition
AMS B Finishes Processes and Fluids Committee
This specification covers requirements for producing brazed joints in parts fabricated from corrosion- and heat-resistant steels, carbon or low-alloy steels, or copper alloys, and the properties of such joints
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements and provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment
Lighting Materials Standards Committee
This specification covers the requirements for a hard anodic coating on magnesium alloys
AMS B Finishes Processes and Fluids Committee
This specification and its supplementary slash specifications establish the requirements for electrodeposition of metals by brush plating
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for a layer of electrodeposited silver followed by a layer of electrodeposited rhodium
AMS B Finishes Processes and Fluids Committee
This specification and its detail slash specifications cover the requirements for media to be used in controlled shot peening of metal parts
AMS B Finishes Processes and Fluids Committee
This specification establishes nondestructive testing methods, sampling frequency, and acceptance criteria for the inspection of metal castings
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction, general purpose industrial and forestry machines, as noted in SAE J1116. Construction and industrial machinery is normally operated off highways, therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760
OPTC3, Lighting and Sound Committee
The SAE Standards for aluminum casting alloys cover a wide range of castings for general and special use, but do not include all the alloys in commercial use. Over the years, aluminum alloys have been identified by many numbering systems as shown in Table 1. Presently, SAE is recommending the use of the UNS Numbering System to identify these materials. The castings are made principally by sand cast, permanent mold, or die cast methods; however, shell molding, investment casting, plaster cast, and other less common foundry methods may also be used. If the alloys listed do not have the desired characteristics, it is recommended that the manufacturers of aluminum castings be consulted
Metals Technical Committee
The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application
Metals Technical Committee
This SAE Standard establishes a uniform testing procedure and performance requirements for the level surface testing of hand-operated service brake systems on snowmobiles
Snowmobile Technical Committee
Circuit Protection and Switch Device Committee
This SAE Standard specifies requirements for the processing of iron and steel (excluding corrosion resisting steels) to produce coatings consisting essentially of inorganic phosphates, which are intended to be used in conjunction with supplementary finishes for the protection of the basis metal against corrosion (and in certain cases to give, additionally, anti-wear properties to sliding surfaces
AMS B Finishes Processes and Fluids Committee
This specification covers the procedures for identification and marking of bare welding wire by a color code system and marking of spools
AMS B Finishes Processes and Fluids Committee
The scope of this SAE Standard is to provide a uniform chamfer on brake blocks
Truck and Bus Foundation Brake Committee
The extent of test conditions on the dynamometer must be sufficient to determine the efficiency characteristics corresponding to the following range of vehicle operations in all gear ratios with locked torque converters (open converter can also be done where appropriate and noted). a Efficiency versus output speed versus input torque b Torque ratio versus output speed c Input speed versus output speed d Output torque versus output speed e Parasitic loss versus input speed (spin losses) f Cooler flow g Output torque bias (front wheel drive transaxles
Automatic Transmission and Transaxle Committee
This specification covers requirements for silver deposited on metal parts with a nickel strike between the basis metal and the silver deposit
AMS B Finishes Processes and Fluids Committee
This document provides a recommended practice for determining decarburization and carburization in heat treated carbon and low-alloy steel parts other than case hardened parts. It is not applicable to raw materials
AMS B Finishes Processes and Fluids Committee
The purpose of this standard is to provide uniform methods for defining, quantifying, and classifying the residual stress in metallic structural alloy products and finished parts. These stresses may exist within a single element, or they may be the result of a joining process. Such quantification and classification may be required when residual stresses within mill stock or preforms can impact further in-process distortion during machining or other processes, and when residual stresses within finished components can impact final mechanical properties and performance (especially strength, durability, and fracture performance
null, null
This Aerospace Recommended Practice is intended as a guide toward standard practices for the determination of surface cleanliness that are applicable to field operation. Some of these methods can also be used to determine quality assurance that a surface has been properly prepared and maintained. The instrumental methods are: Wettability, Surface Potential Difference (SPD), Ellipsometry, and Optically Stimulated Electron Emission (OSEE). Each instrument is described with respect to measurement techniques, limitations, and advantages and types of available instruments. Elementary theoretical principles and examples of the use of each instrument are also given
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for producing brazed joints of aluminum and aluminum alloys by immersion in a molten flux bath
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for electrodeposited chromium plating
AMS B Finishes Processes and Fluids Committee
This specification establishes the engineering requirements for producing anodic coatings on magnesium and magnesium alloys, from an alkaline electrolyte, and the properties of those coatings
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for preparation of aluminum and aluminum alloys for soldering by zinc immersion pre-treatment followed by copper plating and tin or tin-zinc alloy plating
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles
Snowmobile Technical Committee
This SAE Standard for wrought aluminum alloys provides sources of chemical and mechanical property data for a considerable range of alloys with varying properties, structures, and applications
Metals Technical Committee
Items per page:
1 – 50 of 208252