Advanced Search
of the following are true


Items (207,248)
This specification covers a corrosion- and heat-resistant steel in the form of seamless tubing
AMS F Corrosion and Heat Resistant Alloys Committee
The following terminology has been generated by the ATA/IATA/SAE Commercial Aircraft Composite Repair Committee (CACRC) and provides terminology for design, fabrication, and repair of composite and bonded metal structures
AMS CACRC Commercial Aircraft Composite Repair Committee
This specification covers an aircraft-quality, low-alloy steel in the form of bars and forgings 1.50 inches or less in diameter or least distance between parallel sides (thickness
AMS E Carbon and Low Alloy Steels Committee
This specification covers a corrosion-resistant steel in the form of wire
AMS F Corrosion and Heat Resistant Alloys Committee
To provide specifications for lighting and marking of industrial wheeled equipment whenever such equipment is operated or traveling on a highway
OPTC3, Lighting and Sound Committee
This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of 9100. This document is published as AQAP 2009 Annex F and 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and 9100
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE practice is intended for the sample preparation of test pieces for automotive wheels and wheel trim. The practice provides a consistent scribing method for use on test panels and or component parts with substrate chemical pretreatment and coating systems. Test specimens can then be subjected to various corrosion tests in order to evaluate performance without significant variations of the degree of exposure of the substrate. The scribing is used to create a break in the coating/finishing as can occur in the field through gravel and other damaging conditions. NOTE— Significant variability is attributed to surface contour, coating hardness/softness, operator reproducibility, and the scribing tool and it’s condition
Wheel Standards Committee
This specification covers a rust removing compound in the form of a solid, generally powdered, to be dissolved in water, and heated
AMS J Aircraft Maintenance Chemicals and Materials Committee
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design of flanges on temperature sensors intended for use in gas turbine engines. Three figures detail the configuration of standard size flange mounts with bolt holes, slotted flanges, and miniaturized flanges for small probes
E-32 Aerospace Propulsion Systems Health Management
This SAE Aerospace Recommended Practice (ARP) defines the nomenclature of temperature measuring devices. General temperature measurement related terms are defined first, followed by nomenclature specifice to temperature measuring devices, particularly thermocouples
E-32 Aerospace Propulsion Systems Health Management
This Aerospace Recommended Practice (ARP) is a general overview of typical airborne engine vibration monitoring (EVM) systems applicable to fixed or rotary wing aircraft applications, with an emphasis on system design considerations. It describes EVM systems currently in use and future trends in EVM development. The broader scope of Health and Usage Monitoring Systems, (HUMS) is covered in SAE documents AS5391, AS5392, AS5393, AS5394, AS5395, AIR4174. This ARP also contains the essential elements of AS8054 which remain relevant and which have not been incorporated into Original Equipment Manufacturers (OEM) specifications
E-32 Aerospace Propulsion Systems Health Management
This report is intended to provide users and producers of metallic shot and grit1 with general information on methods of mechanically testing metal abrasives in the laboratory
Surface Enhancement Committee
This document surveys the systems used for thermal management of batteries in vehicles. Battery thermal management is important for battery performance and cycle life. The document also includes a summary of design considerations for battery thermal management and a glossary of terms
Battery Thermal Management Committee
This SAE Standard describes a procedure for the evaluation of operator seats which may be fitted to agricultural wheeled tractors per SAE J1150 and/or earthmoving machines per SAE J1057. This procedure evaluates only the vertical vibration performance and should not be considered a comprehensive seat evaluation procedure
HFTC4, Operator Seating and Ride
This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles 2032 mm or more in overall width. Stop lamps conforming to the requirements of this document may be used on vehicles less than 2032 mm in overall width
Heavy Duty Lighting Standards Committee
This SAE Standard covers thin wall, low tension primary cable intended for use at 50 V or less in surface vehicle electrical systems
Electrical Distribution Steering Committee
This SAE Standard establishes the test equipment, procedure, and acceptance criteria necessary to determine the location of power driven components that could—upon inadvertent contact by an operator, passenger, or bystander—inflict injury
Snowmobile Technical Committee
This SAE Recommended Practice provides test methods and criteria for evaluating the internal cleanliness and air leakage for engine charge air coolers. This SAE Recommended Practice also provides nomenclature and terminology in common use for engine charge air coolers, related charge air cooling system components, and charge air cooling system operational performance parameters
Cooling Systems Standards Committee
This SAE Recommended Practice describes the test procedures for conducting frontal impact restraint tests for heavy truck applications. Its purpose is to establish recommended test procedures that will standardize restraint system testing for heavy trucks. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included
Truck Crashworthiness Committee
Applies to hydraulic fluid power valves as applied to Off-Road Self-Propelled Work Machines defined in SAE J1116
CTTC C1, Hydraulic Systems
This SAE Standard provides names of major components peculiar to graders as defined in SAE J1057 (See Figure 1). Illustrations are not intended to be exactly descriptive of any particular machine
MTC1, Earthmoving Machinery
This SAE Recommended Practice establishes air quality standards for the pressurized air in the brake system of vehicles with air brakes
Truck and Bus Brake Supply and Control Components Committee
This SAE Information Report provides test methods and determination options for evaluating the maximum wheel power and rated system power of vehicles with electrified vehicle powertrains. The scope of this document encompasses passenger car and light- and medium-duty (GVW <10000 pounds) hybrid-electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), battery electric vehicles (BEVs), and fuel-cell electric vehicles (FCEVs). These testing methods can also be applied to conventional ICE vehicles, especially when measuring and comparing wheel power among a range of vehicle types. This document version includes a definition and determination methodology for a rated system power that is comparable to traditional internal combustion engine power ratings (e.g., SAE J1349 and UN ECE R85). The general public is most accustomed to “engine power” and/or “motor power” as the rating metric for conventional and electrified vehicles, respectively. Wheel power will always be a lower-power
Hybrid - EV Committee
The objective of any organization, as part of continual improvement, is to reduce the number of issues (i.e., undesirable conditions, defects, failures) and to minimize their impact on quality, delivery performance, and cost. This includes having processes in place to detect and eradicate significant and recurrent issues, which implies having well identified problems, a common understanding of their impact and associated root causes, and having defined and implemented adequate actions so that these problems, including similar issues will not happen again
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
The requirements of 9100 apply with the following clarification for software. This standard supplements the 9100 standard requirements for deliverable software and contains quality management system requirements for organizations that design, develop, and/or produce deliverable software and services for the aviation, space, and defense industry. This includes, as required, support software that is used in the development and maintenance of deliverable software and services. The deliverable software may be stand-alone, embedded, mobile application, or loadable into a target computer. This deliverable software may also be part of services (e.g., cloud environment, web hosted solutions or platforms). Where the use of Hardware Description Language (HDL) or high order language is utilized as the design source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic Device (PLD)]; the organization and customer, and/or supplier shall agree on the extent
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Operator Self-Verification can apply to a variety of processes. The primary focus is on traditional manufacturing operations, but applications can be made wherever traditional inspection methods are employed. The practices recommended in this document are intended to identify the basic elements for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve overall efficiency and product quality to processes considered mature, as judged by the organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management system standard requirements. The identified program elements are for voluntary organizational application, and are not intended for contractual flow-down unless otherwise
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
The scope of this SAE Standard is to provide methods to determine display optical performance in all typical automotive ambient light illumination, with focus on high ambient contrast ratio, which is critical for display legibility in a sunshine environment. It covers indoor measurements and simulated outdoor lighting. It is not the scope of this document to set threshold values for automotive compliance. However, some recommended values are presented for reference. The present revision does not address the usage of polarized sunglasses
Vehicular Flat Panel Display Standards Committee
To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. This document standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This standard is applicable to AQMS COs listed in the Online Aerospace Supplier Information System (OASIS) database. This standard is intended for the management and resolution of AQMS CO’s major QMS nonconformities. This standard is not intended to address QMS nonconformities classified as minor or nonconformities related to the products or services provided by the CO
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI). The purpose of the First Article Inspection is to provide objective evidence the all engineering design and specification requirements are properly understood, accounted for, verified, and documented. The purpose of this document is to provide a consistent documentation requirement for aerospace components First Article Inspection. It is the intent that the documentation generated will be a quality record of the supplier and customer for review of accountability and planning, for performing periodic surveillance and audits to verify conformance, for evaluating root cause and corrective action for any non-conformance, and for problem ionvestigations
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This standard establishes requirements for performing and documenting APQP and PPAP. APQP begins with conceptual product needs and extends through product definition, production planning, product and process validation (i.e., PPAP), product use, and post-delivery service. This standard integrates and collaborates with the requirements of the 9100, 9102, 9103, and 9110 standards. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Standard was prepared to assist manufacturers of tractors and implements in providing suitable means of transmitting power from the tractor power take-off to the Implement and satisfactory hitching of the implement to the tractor
Agricultural Tractor Standards Committee (ATSC)
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1
Agricultural Tractor Standards Committee (ATSC)
This SAE Standard provides basic information on the International System of Units, abbreviated SI in all languages, and its application in engineering practice and measurement unit usage
Publications Board
This compliance assessment tool supports the summary of requirements applicable to AS6500A, including potential documentation to demonstrate compliance along with tailoring options and company policies. The standard is applicable to all phases of the system acquisition life cycle. It is intended for use on all programs with manufacturing content. It requires proven manufacturing management practices with the goal of delivering affordable and capable systems to the extent that it is invoked contractually
G-23 Manufacturing Management Committee
The basic requirements of AS9100A apply with the following clarifications. This document supplements the requirements of AS9100A for deliverable software. This supplement contains Quality System requirements for suppliers of products that contain deliverable embedded or loadable airborne, spaceborne or ground support software components that are part of an aircraft Type Design, weapon system, missile or spacecraft operational software and/or support software that is used in the development and maintenance of deliverable software. This includes the host operating system software including assemblers, compilers, linkers, loaders, editors, code generators, analyzers, ground simulators and trainers, flight test data reduction, etc., that directly support creation, test and maintenance of the deliverable software. Where Commercial-Off-The-Shelf (COTS) or non-developmental components are integrated into a deliverable product, the organization and the customer shall agree on the extent of
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This standard defines requirements for the identification, assessment, mitigation, and prevention of risk in the manufacturing process through the application of Process Flow Diagrams (PFDs), Process Failure Mode and Effects Analysis (PFMEA) and Control Plans throughout the life cycle of a product. This standard aligns and collaborates with the requirements of AS9100, AS9102, AS9103, and AS9145. The requirements specified in this standard apply in conjunction with and are not alternative to contractual and applicable statutory and regulatory requirements. In case of conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence
G-22 Aerospace Engine Supplier Quality (AESQ) Committee
This SAE Recommended Practice provides uniform definitions and classifications for motorcycles
Motorcycle Technical Steering Committee
This standard establishes the common requirements for training of DPRV personnel for use at all levels of the aerospace engine supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to its suppliers (reference 9100 and 9110 standards) and to perform product acceptance on its behalf. It is intended that organizations specify their DPRV requirements through the application of AS9117. While the delegating organization will use the AS13001 standard as the baseline for establishing DPRV process and product training, it may include additional contractual training requirements to meet its specific needs. The DPRV training material was primarily developed for aerospace engine supply chain requirements. However, this standard may also be used in other aerospace industry sectors where a DPRV process requiring specific training can be of benefit
G-22 Aerospace Engine Supplier Quality (AESQ) Committee
To define capabilities and limitations of Raman spectroscopy as it pertains to counterfeit detection of EEE parts and suggest possible applications to these ends. Additionally, this document outlines requirements associated with the application of Raman spectroscopy including: Operator training; Sample preparation; Data interpretation; Computerized spectral matching including pass/fail criteria; Equipment maintenance and; Reporting of data. If AS6171/8 is invoked in the contract, the base document, AS6171 General Requirements shall also apply
G-19A Test Laboratory Standards Development Committee
This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company. This process standard does not specify a design or an
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Aerospace Standard (AS) further defines the requirements for a delegation process identified in Aerospace Quality Management System (AQMS) standards (i.e., AS9100, AS9110, AS9120). This standard establishes minimum requirements for the delegation of product verification to an organization's suppliers; outlining requirements for the initial delegation (qualification/selection), maintenance, and removal/withdrawal of delegations
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Recommended Practice is intended to establish guidelines for conducting passenger car roll-over tests so that data obtained by various test facilities may be more readily compared. A description is provided of the facilities and procedures for a curved rail-ramp technique, which has been found to be successful in producing roll-overs. Techniques and instrumentation for the study and evaluation of vehicle structure effects and occupant movement resulting from roll-overs produced by the curved rail-ramp system are also specified. The curved rail-ramp procedure has been evolved from laboratory and field studies and tests which have sought to establish procedures which would provide realistic simulations of roll-over accidents without collision, and which would be reproducible among laboratories and between different types of passenger cars. The original issue of SAE J857 described ground level and hill roll-over techniques. However, it was found that these procedures were not
Impact and Rollover Test Procedures Standards Committee
Items per page:
1 – 50 of 207248