Search
Advanced Search
of the following are true
(
)

Results

Items (212,110)
This specification covers bonded honeycomb core made of aluminum alloy and supplied in the form of blocks, slices, or other configurations as ordered (see 8.5).
AMS D Nonferrous Alloys Committee
This specification covers the requirements for a hard anodic coating on magnesium alloys and the properties of the coating.
AMS B Finishes Processes and Fluids Committee
This specification covers a magnesium alloy in the form of sheet and plate 0.016 to 3.000 inches (0.41 to 76.20 mm) in nominal thickness (see 8.6).
AMS D Nonferrous Alloys Committee
The document provides clarity related to multiple temperature coolant circuits used with on-highway and off-highway, gasoline, and light-duty to heavy-duty diesel engine cooling systems, or hybrid vehicle systems. These multiple temperature systems include engine jacket coolant plus at least one lower temperature system. Out of scope are the low temperature systems used in electric vehicles. This subject is covered in SAE J3073. Note that some content in SAE J3073 is likely to be of interest for hybrid vehicles. Out of scope are the terms and definitions of thermal flow control valves used in either low-temperature or high-temperature coolant circuits. This subject is covered in SAE J3142.
Cooling Systems Standards Committee
This specification covers a magnesium alloy in the form of sand castings (see 8.6).
AMS D Nonferrous Alloys Committee
This SAE Recommend Practice establishes for passenger cars, light trucks, and multipurpose vehicles with GVW of 4500 kg (10000 pounds) or less, as defined by the EPA, and M1 category vehicles, as defined by the European Commission:
Interior Climate Control Vehicle OEM Committee
This SAE Aerospace Recommended Practice (ARP) establishes general criteria for the installation (e.g., type, location, accessibility, stowage) and crew member training needed for portable fire extinguishers.
S-9A Safety Equipment and Survival Systems Committee
This specification covers an aircraft-quality, low-alloy steel in the form of round, non-welded tubing free from OD surface seams.
AMS E Carbon and Low Alloy Steels Committee
This document recommends standard gland dimensions for static radial O-ring seal applications specifically for engine and engine control systems and provides recommendations for modifying these glands in special applications.
A-6C2 Seals Committee
The scope of this SAE Aerospace Recommended Practice (ARP) is to establish the procedure for creating titles of aerospace tubing and clamp installation documents generated by SAE Subcommittee G-3E.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This SAE Aerospace Standard (AS) provides design criteria for onboard stairways intended for use by passengers aboard multi-deck transport category airplanes. It is not intended for stairways designed for use only by crewmembers, supernumeries, or maintenance personnel. Additionally, this AS does not apply to fuselage mounted or external stairways used for boarding passengers, which are covered by ARP836.
S-9B Cabin Interiors and Furnishings Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This AIR provides means of developing a composite training program, as stipulated by FAA AC 20-107B, FAA AC 65-33A, EASA AMC 20-29, and other similar regulatory guidance. Its approach is a comprehensive, sequential training curriculum build-up, customized to the specific needs of the organization (see Figure 2). It contains recommendations for the skill-building, training, and qualification of persons involved in the design, fabrication, maintenance, and repair of aircraft composite structures or other aviation composite components. It further addresses the qualification of administrative personnel and instructors. Flight operations are usually not in the scope of an SAE CACRC Standard; however, the recommendations of this report may be used also for this target audience. This report addresses persons responsible for the definition of training, qualification and authorization, or the supervision of aviation personnel. Its content intends to facilitate the development of a formal
AMS CACRC Commercial Aircraft Composite Repair Committee
This SAE Aerospace Information Report (AIR) discusses the nature of landing gear stability, describes many common landing gear stability problems, and suggests approaches and methods for solving or avoiding them.
A-5 Aerospace Landing Gear Systems Committee
This specification covers an aluminum alloy in the form of plate 3.000 to 6.000 inches (76.20 to 152.40 mm), inclusive, in nominal thickness (see 8.5).
AMS D Nonferrous Alloys Committee
This specification covers a nickel-aluminum-bronze alloy in the form of sand, centrifugal, and continuous castings (see 8.5).
AMS D Nonferrous Alloys Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This document applies to the development of Plans for integrating and managing electronic components in equipment for the military and commercial aerospace markets, as well as other ADHP markets that wish to use this document. Examples of electronic components described in this document include resistors, capacitors, diodes, integrated circuits, hybrids, application specific integrated circuits, wound components, and relays. It is critical for the Plan owner to review and understand the design, materials, configuration control, and qualification methods of all “as-received” electronic components and their capabilities with respect to the application; and to identify risks and, where necessary, take additional action to mitigate the risks. The technical requirements are in Section 3 of this standard and the administrative requirements are in Section 4.
APMC Avionics Process Management
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.
AMS F Corrosion and Heat Resistant Alloys Committee
This SAE Standard applies to equipment to be used with R-1234yf refrigerant only. It establishes requirements for equipment used to recharge R-1234yf to an accuracy level that meets Section 9 of this document and purity levels defined in SAE J2099. Refrigerant service equipment is required to ensure adequate refrigerant recovery to reduce emissions and provide for accurate recharging of mobile air-conditioning systems. Equipment shall be certified to meet all performance requirements outlined in this document and international/regional construction and safety requirements as outlined in this document.
Interior Climate Control Service Committee
This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings (see 8.5).
AMS D Nonferrous Alloys Committee
This specification covers the engineering requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of silver alloy filler metals and the properties of such joints.
AMS B Finishes Processes and Fluids Committee
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 32 square inches (206 cm2) in area (see 8.6).
AMS D Nonferrous Alloys Committee
This specification covers a leaded bronze in the form of sand and centrifugal castings (see 8.6).
AMS D Nonferrous Alloys Committee
This document applies to safety observers or spotters involved with the use of outdoor laser systems. It may be used in conjunction with AS4970.
G-10T Laser Safety Hazards Committee
This SAE Recommended Practice establishes consistent test procedures for determination of steady-state directional control properties for passenger cars and light trucks with two axles. These properties include the steering-wheel angle gradient, reference steer angle gradient, sideslip angle gradient, vehicle roll angle gradient, and steering-wheel torque gradient with respect to lateral acceleration. They also include the yaw velocity gain, lateral acceleration gain, and sideslip angle gain with respect to steering-wheel angle. Additionally, the characteristic or critical speed and the front and rear wheel steer compliances may be determined.
Vehicle Dynamics Standards Committee
This specification covers a silicone-rubber-remover compound in the form of a liquid supplied as a ready-to-use product.
AMS J Aircraft Maintenance Chemicals and Materials Committee
This standard establishes the design requirements for a fiber optic serial interconnect protocol, topology, and media. The application target for this standard is the interconnection of multiple aerospace sensors, processing resources, bulk storage resources and communications resources onboard aerospace platforms. The standard is for subsystem interconnection, as opposed to intra-backplane connection.
AS-1A Avionic Networks Committee
This recommended practice covers the attachment of bonded anti-noise brake pad shims only. Mechanically attached shims (those without bonding) are not covered by this procedure.
Brake Linings Standards Committee
Hardness measurements are used as a quality control check of the consistency of formulation and processing of brake linings. Gogan hardness is nondestructive (the penetrator causes shallow surface deformation.). Gogan hardness method alone does not show anything about a lining’s ability to develop friction or to resist fade when used as a friction element in brakes. The hardness and the range of hardness are peculiar to each formulation, thickness, and contour; therefore, the acceptable values and ranges must be established for each formulation and part configuration by the manufacturer.
Brake Linings Standards Committee
This Information Report provides functional definitions and discussions of key terms and concepts for relating the experimental evaluation of driver distraction to real-world crash involvement. Examples of driver distraction and driving performance metrics include those related to vehicle control, object and event detection and response (OEDR), physiological indicators, subjective assessments, or combinations thereof. Examples of real-world crash involvement metrics include the epidemiological effect size measures of risk ratio, rate ratio, and odds ratio. The terms and concepts defined in this document are not intended to contribute to methodologies for assessing the individual metrics within a domain; these are covered in other SAE documents (e.g., SAE J2944) and SAE technical reports. For any measure chosen in one domain or the other, the goal is to give general definitions of key terms and concepts that relate metrics in one domain to those in the other. Issues of repeatability and
Driver Metrics, Performance, Behaviors and States Committee
This SAE Standard was developed primarily for passenger car and truck applications for the sizes indicated, but it may be used in marine, industrial, and similar applications.
Fuel Systems Standards Committee
This SAE Standard provides test procedures, performance requirements, and guidelines for semiautomatic headlamp beam switching devices.
Road Illumination Devices Standards Committee
Items per page:
1 – 50 of 212110