Advanced Search
of the following are true


Items (208,477)
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390
CTTC C2, Electrical Components and Systems
This SAE Standard identifies contractor activities for planning and conducting HSI as part of procurement activities on Department of Defense (DoD) system acquisition programs. This standard covers HSI processes throughout system design, development, test, production, use, and disposal. Depending on contract phase, type of the program and/or complexity of the program, tailoring of this standard should be applied. Appendix A lists the requrememts (“shall” statements) in this standard along with unique numbers to facilitate tailoring. In addition, Appendix D provides tailoring guidance to better match requirememts in this standard to the DoD’s Adaptive Acquisition Framework pathways. The scope of this standard includes prime and subcontractor HSI activities; it does not include Government HSI activities, which are covered by DoD and service-level regulations and guidelines. HSI programs should use the latest version of standards and handbooks listed below, unless a particular revision is
G-45 Human Systems Integration
This SAE Standard is concerned with the geometrical irregularities of surfaces of solid materials. It established definite classifications for various degrees of roughness and waviness and for several varieties of lay. It also provides a set of symbols for use on drawings and in specifications, reports, and the like. The ranges for roughness and waviness are divided into a number of steps, and the general types of lay are established by type characteristics. This standard does not define what degrees of surface roughness and waviness or what type of lay are suitable for any specific purpose. It does not specify the means by which any degree of such irregularities may be obtained or produced. Neither is it concerned with the other surface qualities such as luster, appearance, color, corrosion resistance, wear resistance, hardness, microstructure, and absorption characteristics, any of which may be governing considerations in specific applications. Sufaces, in general, are very complex
Surface Enhancement Committee
The scope of this SAE Aerospace Information Report (AIR) is to describe the considerations for requirements, specifications, and framework of digital thread in the aircraft product life cycle management. This document is not intended to define an overarching rendition of implementation-dependent features around software or architecture
G-31 Digital Transactions for Aerospace
This SAE Standard establishes performance criteria for towed, semi-mounted, or mounted and arm type rotary mowers with one or more blade assemblies of 77.5 cm blade tip circle diameter or over, mounted on a propelling tractor or machine of at least 15 kW, intended for marketing as industrial mowing equipment and designed for cutting grass and other growth in public use areas such as parks, cemeteries, and along roadways and highways. The use of the word “industrial” is not to be confused with “in-plant industrial equipment.” This document does not apply to: a. Turf care equipment primarily designed for personal use, consumption, or enjoyment of a consumer in or around a permanent or temporary household or residence. b. Equipment designed primarily for agricultural purposes but which may be used for industrial use. c. Self-powered or self-propelled mowers or mowing machines
OPTC1, Personnel Protection (General)
This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines
OPTC1, Personnel Protection (General)
This SAE Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this recommended practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this recommended practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft
OPTC1, Personnel Protection (General)
This SAE Standard describes guarding to help prevent hazardous machine movement caused by activation of the starter motor by bypassing the starter control system. This document is applicable to off-road, self-propelled work machines, as identified in SAE J1116, and agricultural tractors, as defined in ANSI/ASAE S390, which have the potential for hazardous machine movement as a result of bypassing the starter control system and powering of the starter motor
OPTC1, Personnel Protection (General)
This SAE Standard establishes a criteria for a minimum zone of protection for the operator of the machine and establishes certain structural requirements for guards on pneumatic-tired earthmoving haulage machines capable of speeds in excess of 25 km/h. Earthmoving machines covered by this document are dumpers and tractor-scrapers as identified in SAE J/ISO 6165
OPTC1, Personnel Protection (General)
This practice applies to guarding of engine cooling fans used on Off-Road Self-Propelled Work Machines defined in SAE J1116. It does not include guarding for belts, pulleys, or other rotating equipment used on these machines
OPTC1, Personnel Protection (General)
This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a. Earthmoving b. Other than earthmoving: except rollers and compactors c. General purpose industrial d. Forestry e. Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a. Manual steering b. Power-assisted steering c. Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included
OPTC1, Personnel Protection (General)
This SAE Standard is applicable to articulated frame loaders and tractors as defined by SAE J/ISO 6165, and rollers and compactors as defined by SAE J1017, when equipped with steering, frame locking device. The scope is limited to machines where hazards exist due to maintenance operations. Purpose This document provides the performance requirements for a steering, frame locking device which when used will prevent unintended articulation of the machine either during shipment or maintenance operations. In addition, it provides mounting position, storage on the machine and identification requirements
OPTC1, Personnel Protection (General)
This SAE Standard was prepared to assist manufacturers of tractors and implements in providing suitable means of transmitting power from the tractor power take-off to the Implement and satisfactory hitching of the implement to the tractor
Agricultural Tractor Standards Committee (ATSC)
The purpose of this document is to establish guidelines for determining the critical R134a refrigerant charge for off-road, self-propelled work machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390. It will develop a minimum to maximum refrigerant charge range in which the HVAC system can maintain proper operation. Operating conditions and characteristics of the equipment will influence the optimum charge. Since these conditions and characteristics vary greatly from one application to another, careful consideration should be taken to determine the optimum R134a refrigerant charge for the HVAC system
HFTC6, Operator Accommodation
This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress
Surface Enhancement Committee
This SAE Recommended Practice describes the dynamic and static testing procedures required to evaluate the integrity of an equipment mount device or system when exposed to a frontal or side impact (i.e., a crash impact). Its purpose is to provide equipment manufacturers, ambulance builders, and end-users with testing procedures and, where appropriate, acceptance criteria that, to a great extent, ensure equipment mount devices or systems meet the same performance criteria across the industry. Prospective equipment mount manufacturers or vendors have the option of performing either dynamic testing or static testing. Descriptions of the test set-up, test instrumentation, photographic/video coverage, test fixture, and performance metrics are included
Truck Crashworthiness Committee
The purpose of this fuel filter test method is to provide standardized methods for evaluating the performance characteristics of fuel filters by bench test methods. This, combined with data obtained from application tests, may be used to establish standards of performance for filters when tested by these standard methods. Many variations in requirements of filtration to protect fuel supply equipment on engines and variations in operating conditions make it difficult to specify meaningful "in-service" performance standards by which a filter may be judged. By the use of these standard test methods, test conditions are always the same, and comparisons of the laboratory performance of filters may be made with a high degree of confidence. Once the requirements of a particular application are known, performance standards for suitable filters may be established by these test methods, and adequacy of performance of filters for the job may be determined. In order to achieve the highest degree
Filter Test Methods Standards Committee
This SAE Standard provides the minimum requirements for primary and auxiliary jumper cable plug and receptacle for the truck-trailer and converter dolly jumper cable systems for 12 VDC nominal applications. It includes the test procedures, design, and performance requirements
Truck and Bus Electrical Systems Committee
This SAE Standard applies to all self-propelled construction and industrial machines using liquid-cooled internal combustion engines
Cooling Systems Standards Committee
Common or obvious surface imperfections, which sometimes occur in sheet steel, are normally visible to the naked eye before or after fabrication. Illustrations and definitions of these imperfections are contained in this SAE Information Report. The identifying names are those commonly used throughout the steel industry. The imperfections identified include the major and most often encountered imperfections known to exist at this time. These imperfections are variable in appearance and severity. Extreme conditions have been selected in some instances in order to obtain suitable photographs. Photographs are courtesy of the American Iron and Steel Institute, Kaiser Aluminum, LTV Steel, National Steel, The Budd Company
Metals Technical Committee
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations
OPTC3, Lighting and Sound Committee
This specification covers the requirements for electrodeposited zinc-nickel on metal parts, including fasteners and other standard parts
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new light-duty trucks and new multipurpose passenger vehicles1 up to and including 2700 kg (6000 lb) GVW and all classes of new passenger cars
Road Test Procedures Standards Committee
Blade terminals listed in this SAE Recommended Practice may be used for terminating wire ends, or for terminating circuits on devices other than wire
Connector Systems Standards Committee
This SAE Recommended Practice applies to fifth wheel kingpins for heavy-duty commercial trailers and semitrailers, used for off-highway operation or in hauling heavy loads (see Figure 1
Truck and Bus Total Vehicle Steering Committee
This specification defines the procedures and requirements for fusion welding titanium and titanium alloys and the properties of such weldments
AMS B Finishes Processes and Fluids Committee
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements and procedures for three classes of gas, vacuum, liquid, and low pressure (LPC) carburizing and related heat treatment of parts fabricated from carburizing grade steels. Parts made from steels other than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by the purchaser. This specification does not cover pack carburizing
AMS B Finishes Processes and Fluids Committee
These recommendations are intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on agricultural tractors. The controls covered are those centrally located at the operator's normal position
HFTC1, Controls, Visibility, Anthropometrics, Accessibility
This specification covers the engineering requirements for producing a thin tin coating on aluminum alloys by an immersion process
AMS B Finishes Processes and Fluids Committee
This specification covers the procurement of granular heat-treating salts suitable for use in the molten state
AMS B Finishes Processes and Fluids Committee
This Aerospace Recommended Practice (ARP) clarifies terms used in Aerospace materials and process specifications. The terms clarified in this ARP are not intended to supersede those terms for which clarification is already provided in existing specifications
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice applies to off-road, self-propelled work machines defined in SAE J1116 JUN81
CTTC C2, Electrical Components and Systems
This document applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if the load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. This recommended practice applies to all mechanical, hydraulic, and electric powered hoist mechanisms
Cranes and Lifting Devices Committee
This specification covers a petroleum-base liquid solvent
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new trucks, buses, and combination of vehicles designed for roadway use and falling in the following classifications: Light trucks and buses: 6001–10,000 lb (2700–4500 kg) gvw Truck and bus: Over 10,000 lb (4500 kg) gvw Combination of vehicles (towing vehicle over 10,000 lb (4500 kg) gvw
Truck and Bus Brake Systems Committee
This specification, in conjunction with the general requirements for peening media covered in AMS2431, establishes the requirements for the procurement of high density ceramic shot
AMS B Finishes Processes and Fluids Committee
This specification covers silica gel dehydrating agent in the form of a granular powder in either plain or indicator grades
AMS B Finishes Processes and Fluids Committee
This report is an abbreviated summary of metallurgical joining by welding, brazing, and soldering. It is generally intended to reflect current usage in the automotive industry; however, it does include some of the more recently developed processes. More comprehensive coverage of materials, processing details, and equipment required may be found in the Welding Handbook, Soldering Manual, and other publications of the American Welding Society and the American Society for Testing and Materials. AWS Automotive Welding Committee publications on Recommended Practices are particularly recommended for the design or product engineer. This report is not intended to cover mechanical joining such as rivets or screw fasteners, or chemical joining processes such as adhesive joining
Metals Technical Committee
To provide a uniform method for installing thermocouples in automotive brake discs and drums. This SAE Recommended Practice describes two methods for installing thermocouples in automotive brake discs or drums for the purpose of indicating bulk temperature during inertia dynamometer and vehicle road tests
Brake Dynamometer Standards Committee
This SAE Standard covers the most common magnesium alloys used in wrought forms, and lists chemical composition and minimum mechanical properties for the various forms. A general indication of the usage of the various materials is also provided
Metals Technical Committee
Powder metal (P/M) parts are manufactured by pressing metal powders to the required shape in a precision die and sintering to produce metallurgical bonds between the particles, thus generating the appropriate mechanical properties. The shape and mechanical properties of the part may be subsequently modified by repressing or by conventional methods such. as machining and/or heat treating. While powder metallurgy embraces a number of fields wherein metal powders may be used as raw materials, this standard is concerned primarily with information relating to mechanical components and bearings produced from iron-base materials
Metals Technical Committee
Because of the drastic chilling involved in die casting and the fact that the solid solubilities of both aluminum and copper in zinc change with temperature, these alloys are subject to some aging changes, one of which is a dimensional change. Both of the alloys undergo a slight shrinkage after casting, which at room temperature is about two-thirds complete in five weeks. It is possible to accelerate this shrinkage by a stabilizing anneal, after which no further changes occur. The recommended stabilizing anneal is 3 to 6 h at 100 °C (212 °F), or 5 to 10 h at 85 °C (185 °F), or 10 to 20 h at 70 °C (158 °F). The time in each case is measured from the time at which the castings reach the annealing temperature. The parts may be air cooled after annealing. Such a treatment will cause a shrinkage (0.0004 in per in) of about two-thirds of the total, and the remaining shrinkage will occur at room temperature during the subsequent few weeks. Stabilizing results in a decrease in dimensions of
Metals Technical Committee
The information in this report covers data relating to SAE J438, Tool and Die Steels, and is intended as a guide to the selection of the steel best suited for the intended purpose and to provide recommended heat treatments and other data pertinent to their use. Specific requirements as to physical properties are not included because the majority of tool and die steels are either worked or given special heat treatments by the purchaser. The purchaser may or may not elect to use the accompanying data for specification purposes
Metals Technical Committee
SIMILAR SPECIFICATIONS—UNS Z33521, former SAE 903, ingot is similar to ASTM B 240-79, Alloy AG40A; and UNS Z33520, former SAE 903, die casting is similar to ASTM B 86-76, Alloy AG40A. UNS Z35530, former SAE 925, ingot is similar to ASTM B 240-79, Alloy AC41A; and UNS Z35531, former SAE 925, die casting is similar to ASTM B 86-82a, Alloy AC41A
Metals Technical Committee
This SAE Recommended Practice describes the classification of off-road tires and rims for use on construction machines (see SAE J1116), defines related terminology in common use, and shows representative construction details of component parts
MTC8, Tire and Rim
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection
CTTC C1, Hydraulic Systems
This specification covers an aluminum welding flux in the form of powder
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for producing a continuous white layer with controlled extent of porosity by means of a gaseous process, automatically controlled to maintain set values of the nitriding and carburizing potentials that determine properties of the nitrocarburized surface. Automatic control is intended to ensure repeatability of nitrogen and carbon content of the white layer which influences properties such as wear and corrosion resistance, ductility and fatigue strength
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 208477