Search
Advanced Search
of the following are true
(
)

Results

Items (211,955)
Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant SteelsAMS7493L (Current)07/31/2019
This specification covers flash welded rings made of ferritic and martensitic corrosion-resistant steels.
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Compound, Carbon Soil and Paint Remover Aircraft Turbine Engine Components Room Temperature ApplicationAMS1378B (Current)07/29/2020
This specification covers a carbon soil and paint remover compound in the form of a liquid.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Titanium Alloy, Sheet, Strip, and Plate, 6al 4v, AnnealedMAM4911B (Current)03/12/2003
This specification covers a titanium alloy in the form of sheet, strip, and plate procured in metric units. AMS 4911 is the inch/pound version of this MAM. These products have been used typically for parts requiring strength up to 400 degrees C, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP 982 recommends practices to minimize such conditions.
AMS G Titanium and Refractory Metals Committee
Material Specification
Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded JacketAMS3813/1B (Current)06/15/2016
This specification covers cabled-strand ropes formed from impregnated aramid fibers.
AMS P Polymeric Materials Committee
Material Specification
Aviation Fuel, Grade 108/130AMS3034B (Current)01/01/1992
This specification has been declared "SUPERSEDED" by the Aerospace Materials Division, SAE.
AMS B Finishes Processes and Fluids Committee
Material Specification
Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat TreatedMAM4427A (Current)03/12/2003
This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for parts requiring a combination of light weight, high yield strength up to 300 degrees C and relatively high corrosion resistance, but usage is not limited to such applications.
AMS D Nonferrous Alloys Committee
Material Specification
Heat Treatment, Carbon, Low-Alloy and Specialty SteelsAMS2760A (Current)01/01/1987
This specification covers the procedure for through-hardening and related heat treatments of carbon, low-alloy, and specialty steel parts to produce specified mechanical properties within the capability of each respective steel. Heat treating processes such as induction hardening, flame hardening, carburizing, nitriding, austempering, and martempering are recognized processes but are not covered by this specification.
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Webbing, Woven Nylon For Decelerators 1 (25) Wide, 4000 (17,800) Breaking StrengthAMS3718/2B (Current)06/14/2016
This specification covers one width and one strength of nylon webbing.
AMS P Polymeric Materials Committee
Material Specification
Thread, Para-Aramid Intermediate Modulus 6700 yards per pound (13,507 m/kg), 25 pounds force (111 N) Breaking StrengthAMS3787/2B (Current)06/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Material Specification
Bearings, Leaded Bronze, 74Cu - 15.5Pb - 10Sn, Steel BackAMS4825D (Current)08/03/2006
This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing.
AMS D Nonferrous Alloys Committee
Material Specification
Iron-Nickel-Cobalt Alloy, Wire 53Fe - 2.9Ni - 17Co Low Expansion, Glass Sealing, AnnealedAMS7726H (Current)04/06/2017
This specification covers a low-expansion iron-nickel-cobalt alloy in the form of wire.
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Coating Removal Process, Aluminum Alloy Coated Cobalt AlloysAMS1420B (Current)08/01/2001
This specification covers a process for removal of aluminide protective coatings from cobalt alloys.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Thread, Para-Aramid Intermediate Modulus 2000 yards per pound (4032 m/kg), 80 pounds force (356 N) Breaking StrengthAMS3787/5B (Current)06/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Material Specification
Steel Plate, Sheet, and Strip, Alloy 4130, Aircraft QualityAMSS18729A (Current)01/24/2002
This specification covers chrome-molybdenum alloy 4130, steel sheet, strip, and plate of thickness to and including 1.50 inches.
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Tolerances, Aluminum Alloy Standard Structural ShapesAMS2204H (Current)08/01/1996
This specification has been declared 'NONCURRENT' by the Aerospace Materials Division, SAE, as of September 1994. It is recommended, therefore, that this specification not be specified for new designs.
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated and AgedMAM4131B (Current)03/12/2003
This specification covers an aluminum alloy in the form of die forgings and hand forgings procured to metric (SI) units. AMS 4131 is the inch/pound verison of this MAM. These forgings have been used typically for parts requiring a combination of good strength and resistance to stress-corrosion cracking, but usage is not limited to such applications.
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and OveragedAMS4108F (Current)10/28/2015
This specification covers an aluminum alloy in the form of hand forgings 8 inches (203 mm) and under in nominal thickness, and of forging stock.
AMS D Nonferrous Alloys Committee
Material Specification
Steel Nitriding .65ni 1cr 1moAMS6480A (Current)06/01/1951
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol BaseAMS1426D (Current)08/15/2016
This specification covers a glycol-base deicing/anti-icing material in the form of a liquid.
G-12RDP Runway Deicing Product Committee
Material Specification
Cloth, Upholstery, Flame Resistant Novoloid/Aramid, Waffle Type WeaveAMS3856/1B (Current)06/24/2016
This specification covers one weight and one weave of novoloid/aramid cloth.
AMS P Polymeric Materials Committee
Material Specification
Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat TreatedAMS4215J (Current)02/17/2020
This specification covers an aluminum alloy in the form of sand, permanent mold, composite mold, and investment castings.
AMS D Nonferrous Alloys Committee
Material Specification
ANGLE - BULB SECTION EXTRUDEDAMS10135B (Current)03/20/2012
AMS D Nonferrous Alloys Committee
Material Specification
Plating, Brush, SilverAMS2451/13A (Current)05/24/2022
This specification covers the engineering requirements and process for brush plating of silver by electrodeposition. It shall be used, in conjunction with AMS2451, for silver deposits.
AMS B Finishes Processes and Fluids Committee
Material Specification
Alcohol, Denatured EthylAMS3002H (Current)03/24/2014
This specification covers a denatured ethyl alcohol in the form of a liquid.
AMS B Finishes Processes and Fluids Committee
Material Specification
Chemical Conversion Coatings on Aluminum and Aluminum AlloysAMSC5541A (Current)07/01/2000
This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials and the surfaces of aluminum and aluminum alloys. This specification is intended specifically to provide components of military weapon systems with maximum corrosion resistance. The coating also provides a surface having better paint adhesion than uncoated aluminum. It is not intended as a general purpose coating for commercial and decorative applications, (see 6.1).
AMS B Finishes Processes and Fluids Committee
Material Specification
Cloth, Chloroprene (Cr) Coated NylonAMS3850B (Current)10/01/1995
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.
AMS CE Elastomers Committee
Material Specification
Depleted Uranium CastingsAMS7730F (Current)09/08/2009
AMS G Titanium and Refractory Metals Committee
Material Specification
Cloth, Type "E" Glass, "B" Stage Polyimide-Resin-Impregnated 181 Style Fabric, High-Flow Addition - Cure Resin for Press Cure At 40-100 Psi (275-690 Kpa) Or Vacuum/Autoclave ProcessingAMS3845/2B (Current)01/01/1992
This specification has been designated as "SUPERSEDED" by the Aerospace Materials Division, SAE, as of September 1991.
AMS P17 Polymer Matrix Composites Committee
Material Specification
Aerodynamic Fairing Compound −55° to +150°C (−65° to +300°F)AMS3697C (Current)01/17/2012
This specification covers a two-component air-curing, aluminum-powder-filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife.
AMS G9 Aerospace Sealing Committee
Material Specification
Fabric-Wire Reinforced Asbestos, Polytetrafluoroethylene Impregnated, SinteredAMS3839E (Current)07/01/1992
No scope available.
AMS P Polymeric Materials Committee
Material Specification
Steel Tubing, Welded, 0.13 Carbon, Maximum, AnnealedAMS5053J (Current)09/02/2009
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Compound, Zinc Chromate, Sealing (Unthinned) Hot Oil ResistingAMS3112 (Current)10/01/1945
AMS P Polymeric Materials Committee
Material Specification
Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 - 45AMS3363E (Current)01/17/2012
This specification covers a silicone rubber in the form of a two-component liquid compound.
AMS G9 Aerospace Sealing Committee
Material Specification
Compound, Zinc Chromate, SlushingAMS3111 (Current)10/01/1945
AMS P Polymeric Materials Committee
Material Specification
Magnesium Alloy Castings, Sand 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat TreatedAMS4424L (Current)02/26/2014
This specification covers a magnesium alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Material Specification
Pressure Testing, Gaseous Media, 70 KpaMAM2601C (Current)04/24/2003
This specification provides requirements and procedures for gas-pressure leak testing of parts.
AMS B Finishes Processes and Fluids Committee
Material Specification
Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial AnnealedAMS4907M (Current)08/04/2020
This specification covers a titanium alloy in the form of sheet, strip, and plate on product 0.008 to 3.000 inches (0.20 to 76.20 mm), inclusive in thickness.
AMS G Titanium and Refractory Metals Committee
Material Specification
Cleaning Compounds, For Parts Washers and Spray CabinetsAMSC29602A (Current)07/09/2012
This specification establishes the requirements for cleaning compounds, used in parts washers and spray cabinets for cleaning aircraft components.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Synthetic Rubber Buna S Type (45-55)AMS3246 (Current)05/01/1956
AMS CE Elastomers Committee
Material Specification
Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)AMSH7199A (Current)04/19/2013
This specification presents requirements for the heat treatment of parts and components fabricated from wrought (plate, sheet, strip, bar, rod, wire extrusions and tube and forgings) copper alloys, numbers C17000, C17200, C17300, C17500, and C17510 (see 6.7). This specification also covers “bright hardening”.
AMS D Nonferrous Alloys Committee
Material Specification
DIGLYCIDYL ESTER RESINAMS3296 (Current)10/01/1995
This specification covers a prepolymer in the form of a low molecular weight aromatic diglycidyl ester resin.
AMS P Polymeric Materials Committee
Material Specification
Felt, KapokAMS3291 (Current)12/16/2002
AMS P Polymeric Materials Committee
Material Specification
Felt, (Firm Pad), Gray, (80% Wool)AMS3290 (Current)12/16/2002
AMS P Polymeric Materials Committee
Material Specification
Felt, Upholstery (100% Wool)AMS3288 (Current)12/16/2002
AMS P Polymeric Materials Committee
Material Specification
Steel Tubing, Mechanical, 0.95Cr 0.20Mo (0.38-0.43C)AMS6390D (Current)05/01/1999
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Felt, HairAMS3280 (Current)05/01/1954
AMS CE Elastomers Committee
Material Specification
Plastic Sheet, PolycarbonateAMSP46144A (Current)04/13/2015
This specification covers polycarbonate sheet.
AMS P Polymeric Materials Committee
Material Specification
Tape, Nylon Cloth For Ring-Slot ParachutesAMS3820B (Current)04/13/2015
This specification covers a nylon cloth in the form of tape.
AMS P Polymeric Materials Committee
Material Specification
Sealing Compound Two-Part, Condensation Cured (Type 3) Firewall SealantAMS3374/3A (Current)02/18/2011
This specification covers two-part, condensation cured, high temperature resistant silicone sealing compounds.
AMS G9 Aerospace Sealing Committee
Material Specification
Sealing Compound Two-Part, Addition Cured Silicone (Type 2) Firewall SealantAMS3374/2A (Current)02/18/2011
This specification covers two-part, addition cured, high temperature resistant silicone sealing compounds.
AMS G9 Aerospace Sealing Committee
Material Specification
Items per page:
1 – 50 of 211955