Search
Advanced Search
of the following are true

Results

Items (208,190)
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This SAE Aerospace Information Report (AIR), is intended to provide a continuum on historical development of aircraft tires
A-5C Aircraft Tires Committee
This SAE Aerospace Information Report (AIR) applies to landing gear tires and airframe structure for all types and models of civil and military aircraft having tires as part of the landing gear
A-5C Aircraft Tires Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Standard is applicable to suppliers of electronic components, assemblies, equipment and related materials. This standard establishes the general requirements to achieve a certified process. The use of this standard is intended for any manufacturing or service company whose goal is to achieve customer satisfaction through continuous improvement
Systems Management Council
This model is designed to enhance insight into the application of meaningful metrics. The emphasis is on business processes which may best provide indication of the level of risk to the customer when contemplating or continuing business with the supplier base. (E.g., the RFP/RFQ, proposal, supplier selection, and performance
Systems Management Council
Areas for the standard metric series of thread diameter-pitch combinations for aerospace externally threaded fasteners are established for the following conditions: a Area for ultimate shear stress or load in unthreaded shank. b Area for ultimate tensile stress or load in thread. c Area for stress durability test load in thread. d Area for stress-rupture test load at elevated temperature. e Area for tension-tension fatigue test load
E-25 General Standards for Aerospace and Propulsion Systems
This SAE Metric Aerospace Standard defines the requirements for corrosion resistant steel helical coil metric series screw thread inserts made from formed wire, the inner surfaces of which, after assembly, provide internal threads of the diameter and pitch specified on the drawing
E-25 General Standards for Aerospace and Propulsion Systems
To fully define the following requirements for bolts with spline and hexagon heads of strength class up to but not including 1250 MPa: a Head dimensions (see 3.1) b Shank dimensions (see 3.2) c Geometric control (see 3.3) d Surface texture (see 3.4) This document is based on one class of thread after all processing, including coating or plating, has been completed as follows: tolerance class 4h6h. For particulars of thread, see AS1370. For thread runout and lead threads, see AS3062. To fully define the following requirements for nuts with spline, plain hexagon and castellated configurations of strength class up to and including 1100 MPa: a Nut dimensions (see 4.1) b Geometric control (see 4.2) c Surface texture (see 4.3) For particulars of threads, see AS1370. This document is based on the following classes of internal threads after all processing, including coating or plating, has been completed: Tolerance class 4H6H for sizes up to and including 5 mm Tolerance class 4H5H for size 6
E-25 General Standards for Aerospace and Propulsion Systems
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Bulletin provides a brief description of tin whisker formation and describes various methods recommended by government and industry to reduce the risk of tin whisker-induced failures in electronic hardware. It is not a mandate nor does it contain any requirements. A tin whisker is a single crystal that emerges from tin-finished surfaces. Tin whiskers can pose a serious reliability risk to electronic assemblies that have pure tin finish. The general risks fall into several categories: [1, 2, 3, 8, 16] Short Circuits: The whisker can create a short circuit, either by 1) growing from an area at one potential to an area at another or 2) breaking free and later bridging these areas. In some cases, these shorts may be permanent and cause catastrophic system failures. A transient short may result if the available current exceeds the fusing current of the whisker, and the whisker can fuse open. The amount of current needed to fuse open the whisker depends on the atmospheric pressure and
CE-12 Solid State Devices
This specification establishes the requirements for the following types of self locking nuts: a Wrenching nuts: i.e., hex, double hex, spline drive. b Anchor nuts: i.e., plate nuts, gang channel nuts, shank (clinch) nuts. The wrenching nuts, shank nuts, and nut elements of plate and gang channel nuts are made of corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286
E-25 General Standards for Aerospace and Propulsion Systems
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories. The standards that form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This
Systems Management Council
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model also has applicability as the basis of standard definitions for use in repositories. The standards that form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This standard, EIA/IS-118
Systems Management Council
This standard provides an environmental performance test method for thermal shock testing of fluid system piping and fittings, excluded hose and hose assemblies
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This standard establishes the requirements and the procedures for impulse testing of hose assemblies, tubing, and fittings for use in aerospace metric hydraulic systems
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This SAE Aerospace Standard (MA) establishes the diameter-pitch combinations of ISO metric 60° screw threads recommended for use in the aerospace industry for metric module shaft or bearing retaining screw threads
E-25 General Standards for Aerospace and Propulsion Systems
Items per page:
1 – 50 of 208190