Results
This SAE Recommended Practice covers passive torque biasing axle and center differentials used in passenger car and light truck applications. Differentials are of the bevel gear, helical gear, and planetary types, although other configurations are possible.
This SAE Recommended Practice covers the design and application of a 120 VAC single phase engine based auxiliary power unit or GENSET. This document is intended to provide design direction for the single phase nominal 120 VAC as it interfaces within the truck 12 VDC battery and electrical architecture providing power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off.
This material type has resistance to hot air, but generally has poor resistance to fuels and lubricants, but usage is not limited to such applications. Each application should be considered separately. This material type has a typical service temperature range of -85 to 500 °F (-65 to 260 °C). The operating temperature range of the material is a general temperature range, but the presence of particular fluids and design parameters may modify this range. Recommendations on the material selection are based on available technical data and are offered as suggestions only. Each user should make his own tests to determine the suitability for his own particular use.
This specification provides dimensional standards for crimp type contact wire barrel design and is a replacement for MS3190. Some wire barrel designs may exist in AS39029 but are not considered approved for future use, therefore, will not appear in this specification. The crimp barrel sizes listed in this document have been standardized in AS39029 and AS22520 specifications, tools and contacts are available to support these listed sizes. These crimp barrel requirements shall be used for any contact, regardless of whether it is a standard or non-standard contact configuration. The specification lists details for three types of wire barrels: A, B, and C. Wire barrel type A is not recommended for new design. Table 4 lists each AS39029 detail sheet wire barrel type.
This SAE Recommended Practice establishes a uniform, powered vehicle test procedure and minimum performance requirement for lane departure warning systems used in highway trucks and buses greater than 4546 kg (10000 pounds) gross vehicle weight (GVW). Systems similar in function but different in scope and complexity, including lane keeping/lane assist and merge assist, are not included in this document. This document does not apply to trailers, dollies, etc. This document does not intend to exclude any particular system or sensor technology. This document will test the functionality of the lane departure warning system (LDWS) (e.g., ability to detect lane presence and ability to detect an unintended lane departure), its ability to indicate LDWS engagement, its ability to indicate LDWS disengagement, and its ability to determine the point at which the LDWS notifies the human machine interface (HMI) or vehicle control system that a lane departure event is detected. Moreover, this
This SAE Recommended Practice establishes recommended procedures for the issuance, assignment, and structure of Identification Numbers on a uniform basis by states or provinces for use in an Assigned Identification Number (AIN).
This drawing specifies parts AS21506, AS21507, AS21508, AS21509, AS21510, AS21511, AS21512, AS21513, AS21514, AS21515, AS21516, AS21517, AS21518, AS21519, AS21520, AS21521, AS21522, AS21523, AS21524, AS21525, AS21526, AS21527, AS21528, AS21529, AS21530, AS21531, AS21532, AS21534, AS21536, AS21538, AS21540, AS21542, AS21544, AS21546, AS21548, AS21550, AS21552, AS21554, AS21556, AS21558, AS21560, AS21562, AS21564, AS21566, AS21568, AS21570, AS21572, AS21574, AS21576, AS21578, AS21580, AS21582, AS21584, AS21586, AS21588, AS21590, AS21592, AS21594, and AS21596. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
No scope available.
This drawing specifies parts AS21405, AS21406, AS21407, AS21408, AS21409, AS21410, AS21411, AS21412, AS21413, AS21414, AS21415, AS21416, AS21417, AS21418, AS21419, AS21420, AS21421, AS21422, AS21423, AS21424, AS21425, AS21426, AS21427, AS21428, AS21429, AS21430, AS21431, AS21432, AS21434, AS21436, AS21438, AS21440, AS21442, AS21444, AS21446, AS21448, AS21450, AS21452, AS21454, AS21456, AS21458, AS21460, and AS21462. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21607, AS21608, AS21609, AS21610, AS21611, AS21612, AS21613, AS21614, AS21615, AS21616, AS21617, AS21618, AS21619, AS21620, AS21621, AS21622, AS21623, AS21624, AS21625, AS21626, AS21627, AS21628, AS21629, AS21630, AS21631, AS21632, AS21634, AS21636, AS21638, AS21640, AS21642, AS21644, AS21646, AS21648, AS21650, AS21652, AS21654, AS21656, AS21658, AS21660, AS21662, AS21664, AS21666, AS21668, AS21670, AS21672, AS21674, AS21676, AS21678, AS21680, AS21682, AS21684, AS21686, AS21688, AS21690, AS21692, AS21694, and AS21696. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21905, AS21906, AS21907, AS21908, AS21909, AS21910, AS21911, AS21912, AS21913, AS21914, AS21915, AS21916, AS21917, AS21918, AS21919, AS21920, AS21921, AS21922, AS21923, AS21924, AS21925, AS21926, AS21927, AS21928, AS21929, AS21930, AS21931, AS21932, AS21934, AS21936, AS21938, AS21940, AS21942, AS21944, AS21946, AS21948, AS21950, AS21952, AS21954, AS21956, AS21958, AS21960, and AS21962. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21708, AS21709, AS21710, AS21711, AS21712, AS21713, AS21714, AS21715, AS21716, AS21717, AS21718, AS21719, AS21720, AS21721, AS21722, AS21723, AS21724, AS21725, AS21726, AS21727, AS21728, AS21729, AS21730, AS21731, AS21732, AS21734, AS21736, AS21738, AS21740, AS21742, AS21744, AS21746, AS21748, AS21750, AS21752, AS21754, AS21756, AS21758, AS21760, AS21762, AS21764, AS21766, AS21768, AS21770, AS21772, AS21774, AS21776, AS21778, AS21780, AS21782, AS21784, AS21786, AS21788, AS21790, AS21792, AS21794, and AS21796. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21208, AS21209, AS21210, AS21211, AS21212, AS21213, AS21214, AS21215, AS21216, AS21217, AS21218, AS21219, AS21220, AS21221, AS21222, AS21223, AS21224, AS21225, AS21226, AS21227, AS21228, AS21229, AS21230, AS21231, AS21232, AS21234, AS21236, AS21238, AS21240, AS21242, AS21244, AS21246, AS21248, AS21250, AS21252, AS21254, AS21256, AS21258, AS21260, AS21262, AS21264, AS21266, AS21268, AS21270, AS21272, AS21274, AS21276, AS21278, AS21280, AS21282, AS21284, AS21286, AS21288, AS21290, AS21292, AS21294, and AS21296. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21304, AS21305, AS21306, AS21307, AS21308, AS21309, AS21310, AS21311, AS21312, AS21313, AS21314, AS21315, AS21316, AS21317, AS21318, AS21319, AS21320, AS21321, AS21322, AS21323, AS21324, AS21325, AS21326, AS21327, AS21328, AS21329, AS21330, AS21331, and AS21332. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This drawing specifies parts AS21006, AS21007, AS21008, AS21009, AS21010, AS21011, AS21012, AS21013, AS21014, AS21015, AS21016, AS21017, AS21018, AS21019, AS21020, AS21021, AS21022, AS21023, AS21024, AS21025, AS21026, AS21027, AS21028, AS21029, AS21030, AS21031, AS21032, AS21034, AS21036, AS21038, AS21040, AS21042, AS21044, AS21046, AS21048, AS21050, AS21052, AS21054, AS21056, AS21058, AS21060, AS21062, AS21064, AS21066, AS21068, AS21070, AS21072, AS21074, AS21076, AS21078, AS21080, AS21082, AS21084, AS21086, AS21088, AS21090, AS21092, AS21094, and AS21096. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org/.
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
Items per page:
50
1 – 50 of 211878