Search
Advanced Search
of the following are true

Results

Items (207,244)
This specification establishes requirements for automatic shutoff, quick-disconnect coupling assemblies for fuel and oil lines
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This standard covers oxygen masks and breathing valves used with both panel mounted and mask mounted demand and pressure-demand oxygen regulators. Mask mounted oxygen regulators are covered under other standards, but when the mask mounted regulator incorporates an integral exhalation valve, the performance of this valve shall meet the requirements of this standard
A-10 Aircraft Oxygen Equipment Committee
Document provides information on how military/commercial/gas turbine engine test cell/system users may benefit from this unique Coanda/Refraction concept
EG-1E Gas Turbine Test Facilities and Equipment
This document describes a process that may be used to perform the ongoing safety assessment for (1) GAR aircraft and components (hereafter, aircraft), and (2) commercial operators of GAR aircraft. The process described herein is intended to support an overall safety management program. It is to help a company establish and meet its own internal standards. The process described herein identifies a systematic means, but not the only means, to assess continuing airworthiness. Ongoing safety management is an activity dedicated to assuring that risk is identified and properly eliminated or controlled. The safety management process includes both safety assessment and economic decision-making. While economic decision-making (factors related to scheduling, parts, and cost) is an integral part of the safety management process, this document addresses only the ongoing safety assessment process. This ongoing safety assessment process includes safety problem identification and corrective action
S-18C ARP5150A and ARP5151A Working Group
This recommended practice provides guidelines for the establishment of an induction hardening process for steel components. It is intended to be used as a guide for designers of induction hardened parts, for process auditors, and for purchase specifications and/or process sheets as applicable. Induction heat treatment is intended for hardening of only selected areas of plain carbon or alloy steel components. A prior heat treatment may be specified for improved response of the overall component to induction hardening, or for control of properties in the balance of the part. AMS 2759 is recommended for such prior heat treatment
AMS E Carbon and Low Alloy Steels Committee
The scope of this document is to provide a list of documents of types pertaining to the effects of oxygen on ignition and combustion of materials. Consolidating these references in one place makes it easier to find documents of this type as these references are difficult to locate
A-10 Aircraft Oxygen Equipment Committee
This standard covers both general type and quick-donning type mask assemblies in the following classes: a Class A, oronasal, demand b Class B, oronasal, pressure-demand c Class C, full face, demand d Class D, full face, pressure-demand
A-10 Aircraft Oxygen Equipment Committee
Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner
AGE-2 Air Cargo
This standard covers regulators of the following types: Type I - Automatic Continuous Flow Type II - Adjustable Continuous Flow Type III - Pre-Set Continuous Flow Class A - Cylinder Mounted Class B - Line Mounted
A-10 Aircraft Oxygen Equipment Committee
This test method outlines the recommended procedure for performing static radial limit and ultimate load tests on rolling element bearings used in airframe applications. Bearings covered by this document shall be antifriction ball bearings and spherical roller bearings in either annular or rod end configurations
ACBG Rolling Element Bearing Committee
This test method outlines the recommended procedure for performing static axial limit and ultimate load tests on rolling element bearings used in airframe applications. Bearings covered by this document shall be antifriction ball bearings and spherical roller bearings in either annular or rod end configurations
ACBG Rolling Element Bearing Committee
This document contains information and guidance on the use of Pb-free ball grid arrays (BGAs) in an aerospace, defense, and high performance (ADHP) product, or other products which demand a high reliability
G-24 Pb-free Risk Management Committee for ADHP
This technical report documents three surveys to determine realistic vibration requirements for skid control systems specifications and obtain updated vibration information for locations in aircraft where skid control system components are mounted
A-5A Wheels, Brakes and Skid Controls Committee
This SAE Aerospace Information Report (AIR) discusses the forms that air may take in aircraft hydraulic systems. Further, the effects of the various air forms on system operation are addressed. Recommended system design to prevent air effects and maintenance procedures to prevent and remove air are provided. Nitrogen leakage from accumulators is also a source of gas in hydraulic systems and may compose a portion of the “air” in the hydraulic system. The term “air” in this report does not differentiate between a gas composed strictly of normal atmospheric air or one that includes a mixture of additional nitrogen as well. The discussions of the report apply equally with any proportions of atmospheric air and nitrogen in the system
A-6C1 Fluids and Contamination Control Committee
This document was prepared by the SAE AS-1A2 Committee to establish techniques for validating the Network Terminal (NT) complies with the NT requirements specified in AS5653, Revision B. Note that this verification document only verifies the specific requirements from AS5653 and does not verify all the requirements invoked by documents that are referenced by AS5653. The procuring authority may require further testing to verify the requirements not explicitly defined in AS5653 and in this verification document
AS-1A Avionic Networks Committee
Propulsion measurements and thrust methods presented in the current published versions of AIR1703 and AIR5450 place a primary focus on the engine reactionary force (thrust) acting to propel an aircraft in the forward direction. In contrast, this document addresses the use of the engine reactionary force in the opposite direction (reverse thrust) to supplement aircraft deceleration. This document’s application spans commercial and military transport turbofan engine applications for various engine and reverse thrust configurations. The discussion and examples primarily focus on separate flow exhaust turbofan engines. Piston and turboprop variable-pitch propeller blade applications are not covered. Although reverse thrust has been utilized for in-flight deceleration, primarily for short takeoff and landing aircraft and military fighter applications, this application of reverse thrust is only covered in a cursory manner
E-33 In Flight Propulsion Measurement Committee
This SAE Aerospace Information Report (AIR) is intended to inform users of the proper use, application, and installation of V-Couplings, which will perform satisfactorily only if they are properly installed. This document informs the user of the correct manner of applying and installing V-Couplings and also cautions against improper use
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This document establishes the Rotorcraft Industry Technology Association (RITA) Health and Usage Monitoring System Data Interchange Specification. The RITA HUMS Data Interchange Specification will provide information exchange within a rotorcraft HUMS and between a rotorcraft HUMS and external entities
HM-1 Integrated Vehicle Health Management Committee
This supplement forms a part of Aerospace Standard AS1424, Hose Assemblies, Metal, Medium Pressure, High Temperature, and shall be used to identify hose assembly part standards citing this procurement specification
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
The starters covered by this specification shall be designed to operate on compressed air from ground support equipment, engine interbleed or on board air supply, for the purpose of starting aircraft jet engines
AE-6 Starting Systems and Auxiliary Power Committee
The primary purpose of a Propellant Transfer Unit (PTU) is to temperature-condition and weigh a specific amount of propellant, and transfer if to a vehicle propellant tank. A secondary purpose of a PTU may be to drain propellant from the vehicle tank and return it to the transfer unit when required. The transfer unit may also be used for flushing the vehicle fill lines and transfer unit with appropriate flushing fluids, followed with nitrogen for the purpose of drying the lines and weigh tank. The transfer unit may include provisions for helium purging of the propellant transfer tank and lines, ad supplying a blanket of helium pressure to the transfer tank. Each PTU consists of a piping system with appropriate propellant and pneumatic valves, regulators, relief valves, filters and a propellant pump. Various components such as a scrubber, bubbler, propellant cooler (heat exchanger), propellant weigh tank, weigh scale and a chiller may make up the balance of the assembly. The PTU is an
AGE-3 Aircraft Ground Support Equipment Committee
This SAE Aerospace Recommended Practice (ARP) outlines the basic general design requirements for ground support equipment used in the civil air transport industry. It is intended to assist in standardizing requirements for various configurations of equipment. For procurement of equipment, sections of this document should be specified with due consideration of the functional and environmental requirements of the equipment, and to the relative cost of satisfying those requirements
AGE-3 Aircraft Ground Support Equipment Committee
Aircraft surface precipitation static (p-static) charge can be generated when aircraft fly through ice particles, rain, snow and dust. However, in the context of p-static protection, this document is used for providing guidance for any thing that charges the outer surface of the aircraft (e.g. engine exhaust). P-static discharges from the aircraft can disrupt aircraft communication, navigation, and surveillance radios, and can damage aircraft radomes and windshields. This SAE Aerospace Recommended Practice (ARP) defines design considerations for aircraft p-static control and related methods to verify acceptable aircraft p-static performance. This ARP addresses p-static charging due to the aircraft flying through ice particles, rain, snow and dust. It does not address other triboelectric charging that may be present in an aircraft, such as triboelectric fuel charging or environmental control system or air conditioning static charging. It does not address electrostatic charging created
AE-2 Lightning Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered
AGE-2 Air Cargo
Items per page:
1 – 50 of 207244