Search
Advanced Search
of the following are true

Results

Items (208,190)
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This SAE Standard provides the auxiliary requirements for automotive or RV, additional 12 position, sealed Trailer Tow Connector Plug and Receptacle. The information included within this specification is intended to cover the test methods, design, and performance requirements of optional features for additional power, clean ground for electronic functions, video, data communication, and supplementary electric brake control
Connector Systems Standards Committee
This SAE Metric Aerospace Standard (MA) defines the requirements for heavy-duty polytetrafluoroethylene (PTFE) lined, para-aramid reinforced, hose assembly suitable for use in 135 °C, 34,500 kPa, aircraft and missile hydraulic fluid systems
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This specification covers metric bolts and screws made from a low alloy steel of the type identified under the Unified Numbering System as UNS G87400. The following specification designations and their properties are covered: MA3376 860 MPa minimum ultimate tensile strength at room temperature MA3376-1 1000 MPa minimum ultimate tensile strength at room temperature MA3376-2 860 MPa minimum ultimate tensile strength at room temperature 516 MPa minimum ultimate shear strength at room temperature MA3376-3 1000 MPa minimum ultimate tensile strength at room temperature 600 MPa minimum ultimate shear strength at room temperature
E-25 General Standards for Aerospace and Propulsion Systems
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This specification covers a corrosion-resistant steel in the form of bars, forgings, and forging stock
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints
AMS B Finishes Processes and Fluids Committee
This specification covers one grade of commercially pure titanium in the form of sheet, strip, and plate 1.000 inch (25.40 mm) and under in nominal thickness (see 8.5
AMS G Titanium and Refractory Metals Committee
This specification covers a corrosion-resistant steel in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of flat sheet and plate 0.020 to 0.500 inch (0.51 to 12.70 mm) and under in nominal thickness (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers a general-purpose disinfectant in the form of a concentrated liquid
AMS J Aircraft Maintenance Chemicals and Materials Committee
This SAE Standard covers general and dimensional specifications for the Code 62 metric (Type 1) and inch (Type 2) flanged heads, flange clamps (FC and FCM), and split flange clamps (FCS and FCSM) applicable to four-screw flange type tube, pipe, and hose connections. Also included are the recommended port dimensions and port design considerations. Type 2 (inch) flange clamps and split flange clamps are not for new design. The flanged heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. The rated working pressure of an assembly shall not exceed the least of all the component working pressure rated values. The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail
Hydraulic Hose and Hose Fittings Committee
E-25 General Standards for Aerospace and Propulsion Systems
This document covers metric bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. The following specification designations and their properties are covered
E-25 General Standards for Aerospace and Propulsion Systems
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet
AMS P17 Polymer Matrix Composites Committee
This specification covers nonfluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle. The magnetic particles shall be in the form of either a single material or composite material as defined in 1.3
AMS K Non Destructive Methods and Processes Committee
This specification covers two styles of glass cloth impregnated with a polyester resin system, the resin being processed to a “B” stage condition. Either style of glass may be used
AMS P17 Polymer Matrix Composites Committee
This standard is intended for the automotive industry. Testing methods may specifically define the handling and packaging conditions for the material to be analyzed. In these cases, follow the method as closely as possible. Use this standard as a guide, where the protocol for handling and packaging the samples between part production and testing may be undefined
Volatile Organic Compounds
This specification covers the requirements for a light assembly for use on aircraft cabin desks
A-20C Interior Lighting
This specification covers laminated glass, ready-cut, with various types of edge attachments, for use in aircraft glazing
AMS P Polymeric Materials Committee
This specification covers a synthetic rubber in the form of sheet, strip, tubing, molded shapes, and extrusions
AMS CE Elastomers Committee
Items per page:
1 – 50 of 208190