Search
Advanced Search
of the following are true
(
)

Results

Items (212,684)
Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus RangeAMS4778M (Current)01/22/2025
This specification covers a nickel alloy in the form of wire, rod, strip, foil, tape, and powder and a viscous mixture (paste) of the powder in a suitable binder
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat TreatedAMS4221F (Current)01/22/2025
This specification covers an aluminum alloy in the form of plate 1.500 to 6.000 inches (38.10 to 152.40 mm) in nominal thickness (see 8.6
AMS D Nonferrous Alloys Committee
Material Specification
Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-ShrinkableAMS3634E (Current)01/16/2012
This specification covers an irradiated, thermally-stabilized, modified-polyolefin plastic in the form of dual-wall tubing
AMS P Polymeric Materials Committee
Material Specification
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink RatioAMS3637G (Current)01/16/2012
This specification covers an irradiated, thermally-stabilized, modified polyolefin plastic in the form of thin-wall tubing
AMS P Polymeric Materials Committee
Material Specification
Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink RatioAMS3638G (Current)01/16/2012
This specification covers an irradiated, thermally-stabilized, flame-retardant, modified polyolefin plastic in the form of thin-wall tubing
AMS P Polymeric Materials Committee
Material Specification
Coating, Thermal Spray High Velocity Oxygen/Fuel ProcessAMS2447D (Current)01/14/2019
This specification covers the requirements for thermal spray coatings applied using the high velocity oxygen fuel (HVOF) combustion process. This specification is not intended to be used for duplex coatings, i.e., the application of the coating over a previously applied coating
AMS B Finishes Processes and Fluids Committee
Material Specification
Chemical Check Analysis Limits Cast Nickel And Nickel AlloysAMS2268A (Current)07/23/2002
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Cloth, Type "E" Glass, "B" Stage Polyimide-Resin-Impregnated 181 Style Fabric, High-Flow Addition - Cure Resin for Press Cure At 40-100 Psi (275-690 Kpa) Or Vacuum/Autoclave ProcessingAMS3845/2B (Current)01/01/1992
This specification has been designated as "SUPERSEDED" by the Aerospace Materials Division, SAE, as of September 1991
AMS P17 Polymer Matrix Composites Committee
Material Specification
Fabric-Wire Reinforced Asbestos, Polytetrafluoroethylene Impregnated, SinteredAMS3839E (Current)07/01/1992
No scope available
AMS P Polymeric Materials Committee
Material Specification
Rubber: Silicone Rubber (PVMQ) Low Outgassing, Low Temperature Resistant 45 - 55 Shore “A” Hardness For Seals in Space and Vacuum ServiceAMS7269C (Current)02/28/2019
This specification covers a Silicone (PVMQ) Rubber compound in the form of molded rings
AMS CE Elastomers Committee
Material Specification
Plating, Brush, TinAMS2451/12A (Current)05/24/2022
This specification covers the engineering requirements and process for brush plating of tin by electrodeposition. It shall be used, in conjunction with AMS2451, for general purpose tin deposits
AMS B Finishes Processes and Fluids Committee
Material Specification
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat TreatedAMS5442B (Current)08/04/2022
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 5.0 inches (127mm) in least nominal cross-sectional dimension having a cross-sectional area not greater than 50 in2 (323 cm2), and stock of any size for forging or flash welded rings (see 8.5
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Nickel-Copper Alloy Tubing, Brazed, Corrosion Resistant 67 Ni - 31Cu AnnealedAMS4575F (Current)02/09/2017
This specification covers a corrosion-resistant nickel-copper alloy in the form of copper-furnace-brazed tubing
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, FlexibleAMSDTL23053/13B (Current)12/06/2018
The requirements for acquiring the sleeving described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-DTL-23053
AE-8D Wire and Cable Committee
Material Specification
Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-CrosslinkedAMSDTL23053/11B (Current)12/06/2018
The requirements for acquiring the sleeving described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-DTL-23053
AE-8D Wire and Cable Committee
Material Specification
Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall CrosslinkedAMSDTL23053/4B (Current)12/06/2018
The requirements for acquiring the sleeving described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and standards (DODISS) specified in the solicitation: MIL-DTL-23053
AE-8D Wire and Cable Committee
Material Specification
Insulation Sleeving, Electrical, Heat Shrinkable, Silicone Rubber, FlexibleAMSDTL23053/10B (Current)12/06/2018
The requirements for acquiring the sleeving described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-DTL-23053
AE-8D Wire and Cable Committee
Material Specification
Adhesive Film, Epoxy-Base, High Durability For 175 °C (350 °F) ServiceAMS3695/3 (Current)01/20/2022
This specification covers an adhesive compounded from modified epoxy resins in ready-to-use film supplied in rolls or sheets, either supported by mat or by woven monofilaments or unsupported
AMS P17 Polymer Matrix Composites Committee
Material Specification
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (310S) Solution Heat TreatedAMS5521K (Current)03/01/2019
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Plating, Brush, SilverAMS2451/13A (Current)05/24/2022
This specification covers the engineering requirements and process for brush plating of silver by electrodeposition. It shall be used, in conjunction with AMS2451, for silver deposits
AMS B Finishes Processes and Fluids Committee
Material Specification
Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel or Cobalt Alloys, or Precipitation-Hardenable AlloysAMS7490R (Current)07/14/2020
This specification covers flash welded rings made of corrosion and heat-resistant austenitic steels and austenitic-type iron, nickel, or cobalt alloys, or precipitation-hardenable alloys
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Braid, Flat, Nylon, Electrical Tying Synthetic Rubber CoatedAMS3815E (Current)06/20/2016
This specification covers synthetic-rubber-coated nylon in the form of flat braid
AMS P Polymeric Materials Committee
Material Specification
Cloth, Knitted, Polyamide, High Temperature Resistant Reverse JerseyAMS3800B (Current)06/20/2016
This specification covers one type of polyamide fiber in the form of knitted cloth
AMS P Polymeric Materials Committee
Material Specification
Cloth, Airplane, Cotton, Mercerized 65 Pounds (290 N) Breaking StrengthAMS3804E (Current)06/20/2016
This specification covers one strength and one weave of mercerized cotton known as "airplane cloth
AMS P Polymeric Materials Committee
Material Specification
Rope, Aramid Fiber, Jacketed Parallel Strand, Braided JacketAMS3813/3B (Current)06/20/2016
This specification covers parallel-yarn ropes formed from impregnated aramid fibers
AMS P Polymeric Materials Committee
Material Specification
Nickel Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 48ni 22cr 1.5co 9.0mo 0.60w 18.5feAMS5799D (Current)04/01/1996
This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of April 1996 and has been superseded by AWS A5.11 ENiCrMo-2
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Steel Wire, Welding, Corrosion and Moderate Heat Resistant 15cr 7.1ni 2.4mo 1alAMS5813C (Current)04/24/2003
This specification covers a corrosion and moderate heat resistant steel in the form of welding wire
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Disinfectant, Aircraft General PurposeAMS1452C (Current)07/24/2023
This specification covers a general-purpose disinfectant in the form of a concentrated liquid
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Cloth, Aramid 4.3 oz per sq yd (145 g/m2) Plain WeaveAMS3907/2 (Current)10/04/2022
This specification covers one weight and type of weave of aramid cloth
AMS P17 Polymer Matrix Composites Committee
Material Specification
Silica Cloth, "B" Stage Phenolic Resin Impregnated High Pressure MoldingAMS3830A (Current)07/01/1990
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of January 1990
AMS P17 Polymer Matrix Composites Committee
Material Specification
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, AnnealedAMS5544L (Current)07/14/2020
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Adhesive Film, Epoxy-Base, High Durability For 120 °C (250 °F) ServiceAMS3695/2 (Current)01/20/2022
This specification covers an adhesive compounded from modified epoxy resins in ready-to-use film supplied in rolls or sheets, either supported by mat or by woven monofilaments or unsupported
AMS P17 Polymer Matrix Composites Committee
Material Specification
Adhesive Film, Epoxy-Base, High Durability For 95 °C (200 °F) ServiceAMS3695/1 (Current)01/20/2022
This specification covers an adhesive compounded from modified epoxy resins in ready-to-use film, supplied in rolls or sheets, either supported by mat or by woven monofilaments or unsupported
AMS P17 Polymer Matrix Composites Committee
Material Specification
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile StrengthAMS5518N (Current)02/10/2020
This specification covers a corrosion-resistant steel in the form of sheet and strip
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Oxide Conditioner, Alkaline Permanganate Aircraft Turbine Engine ComponentsAMS1383B (Current)07/23/2020
This specification covers an alkaline permanganate oxide conditioner in the form of a water-soluble powder or a liquid for dilution with water
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Plating, Tin-Zinc AlloyAMS2434E (Current)01/21/2022
This specification covers the requirements for electrodeposited tin-zinc alloy plating
AMS B Finishes Processes and Fluids Committee
Material Specification
Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat TreatedAMS5340E (Current)03/04/2018
This specification covers a corrosion-resistant steel in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/7C (Current)12/07/2017
This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube, and wire produced by extrusion
AMS D Nonferrous Alloys Committee
Material Specification
Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and AgedAMS5917 (Current)05/12/2022
This specification covers a corrosion and heat-resistant nickel alloy in the form of metal injection molded (MIM) parts
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Silicon Bronze Rods and Bars, 95.5cu 3.2si, Hard TemperAMS4615F (Current)04/01/1995
This specification has been CANCELLED by the Aerospace Materials Division, SAE, as of April, 1995
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Bronze Bars, Rods, Tubing and Forgings 90cu 8.5al SoftAMS4630G (Current)01/01/1989
AMS D Nonferrous Alloys Committee
Material Specification
Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin, Flammability ControlledAMS3599B (Current)08/25/2011
This specification covers epoxy-resin-impregnated glass fabric laminates in the form of sheet clad on one or both sides with electrolytically-deposited copper foil
AMS P Polymeric Materials Committee
Material Specification
Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As CastAMS5395D (Current)03/04/2018
This specification covers a corrosion-resistant alloy ductile iron in the form of sand castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat TreatedAMS4417C (Current)03/04/2018
This specification covers a magnesium alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold FinishedAMSQQA225/6B (Current)03/04/2018
This specification covers the specific requirements for 2024 aluminum alloy bar, rod and wire produced by rolling, drawing or cold finishing
AMS D Nonferrous Alloys Committee
Material Specification
Sealing Compound, Polythioether For Aircraft Windshields and Canopies, For Use Up to 300 °F (149 °CAMS3258A (Current)09/23/2011
This specification covers a polythioether based sealing compound supplied as a two-component system suitable for application by brush, or by extrusion gun or spatula
AMS G9 Aerospace Sealing Committee
Material Specification
Adhesion Promoter For Polysulfide Sealants, Non-crazing of Acrylic and PolycarbonateAMS3101B (Current)09/23/2011
This specification covers adhesion promoters in liquid form
AMS G9 Aerospace Sealing Committee
Material Specification
Ozone in High Altitude AircraftAIR910C (Current)10/17/2011
The purpose of this report is to provide information on ozone, its effects, generally accepted ozone exposure limits (aviation and non-aviation), and methods of its control in high altitude aircraft. Sources of information are listed and referenced in the text
AC-9 Aircraft Environmental Systems Committee
Information Report
Sound and Thermal Insulation for Aircraft, General Specification for the InstallationAS6144A (Current)10/17/2011
This specification covers general requirements for the installation of sound and thermal insulation in aircraft
AC-9 Aircraft Environmental Systems Committee
Technical Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3AAS3245D (Current)05/10/2023
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
Items per page:
1 – 50 of 212684