Search
Advanced Search
of the following are true
(
)

Results

Items (212,795)
This document contains information and guidance necessary for the development of a representative, repeatable validation program that may be utilized to assess the capability of SHM systems. The nature of SHM data differs from that seen in traditional nondestructive evaluation (NDE) applications in that the position of SHM sensors is fixed and SHM data can be available much more frequently (if not continuously) over time. This document presents methodologies that can be used to arrive at SHM capability while considering the unique nature of SHM deployment. Each SHM system must be considered independently to determine the applicability and limitations of the guidance contained here for each SHM system being assessed.
Aerospace Industry Steering Committee on Structural Health
This SAE Recommended Practice establishes recommended procedures for the issuance, assignment, and structure of Identification Numbers on a uniform basis by states or provinces for use in an Assigned Identification Number (AIN).
VIN - WMI Technical Committee
This specification covers the material and process requirements for fabricating sandwich radomes having hot-melt, addition-reaction polyimide-resin-impregnated quartz cloth shells and polyimide-resin syntactic foam cores.
AMS P17 Polymer Matrix Composites Committee
This specification covers a fluorosilicone rubber in the form of molded rings.
AMS CE Elastomers Committee
This specification covers a prepolymer in the form of an epoxy cresol novolac (ECN) resin.
AMS P17 Polymer Matrix Composites Committee
This specification covers a fuel and low-temperature resistant butadiene-acrylonitrile (NBR) rubber in the form of molded rings.
AMS CE Elastomers Committee
This specification covers aramid fibers in the form of woven cloth.
AMS P17 Polymer Matrix Composites Committee
This specification covers the material and process requirements for fabricating sandwich radomes having polyimide-resin-impregnated quartz cloth shells and polyimide-resin syntactic foam cores.
AMS P17 Polymer Matrix Composites Committee
This specification covers honeycomb core made of polyamide paper sheets and supplied in the form of blocks, slices, and ordered shapes, the cells of the core being in an overexpanded, rectangular configuration.
AMS P17 Polymer Matrix Composites Committee
This Aerospace Specification establishes the requirements for a threaded flexible coupling assembly, hereafter referred to as the assembly, which utilizes ferrules or machined tube end fittings to join tubing and components in aircraft fuel, vent, or other systems. This coupling assembly is designed for use from -54 to 93 °C and at 862 kPa peak working pressure. AS coupling components referenced herein have been qualified to AS1710. Ferrule referenced herein are inch ferrules adapted to metric tubing.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This guide is intended to cover specifications applicable to MAP transducers. It is also applicable to transducers such as Barometric (Ambient) Absolute Pressure transducers, Manifold Vacuum transducers, and similar pressure transducers used in automotive systems. Although this guide is oriented towards active devices (those using internal signal conditioning), it can be applied to passive devices with minor modifications.
Electrical Systems
This SAE Recommended Practice defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal, hazard warning, warning lamp alternating, and combination flashers.
Circuit Protection and Switch Device Committee
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
Engine Power Test Code Committee
This specification covers honeycomb core made of polyamide paper sheets in a non-hexagonal, flexible cell configuration and supplied in the form of blocks, slices, and ordered shapes.
AMS P17 Polymer Matrix Composites Committee
This specification establishes the acceptance criteria and inspection requirements for adhesive-bonded sandwich structures including the metal-to-metal bonding found in these structures, but usage is not limited to such applications and each application should be considered individually.
AMS P17 Polymer Matrix Composites Committee
This specification and its supplementary detail specifications cover corrosion-inhibiting, modified epoxy primers in the form of ready-to-use sprayable liquids.
AMS P17 Polymer Matrix Composites Committee
This specification and its supplementary detail specifications cover organic fibers in the form of cloth impregnated with epoxy resin, the resin to be supplied in a "B" stage condition.
AMS P17 Polymer Matrix Composites Committee
This specification covers a mold release agent in the form of a liquid.
AMS P17 Polymer Matrix Composites Committee
This specification covers a foaming-type, heat-curing, resin-base adhesive in the form of paste or sheet.
AMS P17 Polymer Matrix Composites Committee
This specification covers a thermally stable aramid fabric in the form of cloth.
AMS P17 Polymer Matrix Composites Committee
This specification covers butadiene acrylonitrile (NBR) rubber in the form of molded rings.
AMS CE Elastomers Committee
This procurement specification covers aircraft quality metallic gaskets having a "C" shape cross-section to form a seal ring, made from a corrosion and heat resistant age hardenable nickel base alloy of the type identified under the Unified Numbering System as N07750.
E-25 General Standards for Aerospace and Propulsion Systems
This SAE Information Report is intended to help promote the proper use of Predictive and Preventive Diagnostic Maintenance in hydraulic systems. This document can be used as a selection guide for the level of diagnostic equipment and methods to specify for a given application. Each application has its own particular requirements.
Industrial Fluid Power Components
This SAE Recommended Practice defines the test conditions, procedures, and performance requirements for 6, 12, and 24 V Door Courtesy Switches which are intended for use in motor vehicles.
Circuit Protection and Switch Device Committee
The procedures and guidelines detailed in this SAE Information Report provide various techniques and processes to properly clean fluid power piping prior to assembly and operation.
Industrial Fluid Power Components
These recommended practices are applicable for lubrication components and systems supplied on machines and equipment used in the automotive industry; for the purpose of this document, any equipment dispensing lubricant used in manufacturing and/or assembly processes. These practices do not apply to injection of pneumatic components.
Manufacturing Division
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein.
Ship Fluid Systems Committee
This document establishes minimum performance criteria at GCWR and calculation methodology to determine tow-vehicle TWR for passenger cars, multipurpose passenger vehicles, and trucks. This includes all vehicles up to 14000 pounds GVWR.
Tow Vehicle Trailer Rating Committee
Items per page:
1 – 50 of 212795