Search
Advanced Search
of the following are true
(
)

Results

Items (212,628)
Flame Resistance Treatment of Interior FabricsAMS3855A (Current)01/01/1987
AMS CE Elastomers Committee
Material Specification
Flame Resistant Properties for Aircraft MaterialsAMS3852A (Current)01/01/1987
AMS CE Elastomers Committee
Material Specification
Fire Resistant Properties for Aircraft MaterialsAMS3851A (Current)01/01/1987
AMS CE Elastomers Committee
Material Specification
Sulfuric Acid Anodizing of Aluminum and Aluminum AlloysAMS03_25A (Current)10/04/2017
This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys
AMS B Finishes Processes and Fluids Committee
Material Specification
Steel Castings, Investment, Corrosion Resistant 18Cr - 9Ni Solution Heat TreatedAMS5358D (Current)04/04/2017
This specification covers a corrosion-resistant steel in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Alloy, Corrosion- and Heat-Resistant, Bars and Forgings 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2Al - 0.03B Double Vacuum Melted Solution, Stabilization, and Precipitation Heat TreatedAMS5846D (Current)02/07/2022
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and forging stock
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Tolerances, Metric Rubber ProductsMAM2279B (Current)03/19/2014
This specification covers established metric (SI) manufacturing tolerances applicable to non-cellular rubber products ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive" applies only to the higher figure of the specified range
AMS CE Elastomers Committee
Material Specification
Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm TypeAMSR83283A (Current)03/19/2014
This specification covers 45 durometer hardness, high strength silicone rubber
AMS CE Elastomers Committee
Material Specification
Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Cold Rolled, TemperedAMS5546E (Current)04/05/2017
This specification covers a corrosion and moderate heat resistant steel in the form of sheet and strip
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Steel Castings, Tubular, Centrifugal, Corrosion Resistant 15Cr - 4.6Ni - 0.22 (Cb+Ta) - 2.8Cu Solution Heat TreatedAMS5348C (Current)04/04/2017
This specification covers a corrosion-resistant steel in the form of tubular centrifugal castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and TemperedAMS5351G (Current)04/04/2017
This specification covers a corrosion and moderate heat resistant steel in the form of sand castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Steel Welding Electrodes, Covered, Corrosion and Heat Resistant 18.5Cr - 12.5Ni - 2.5MoAMS5691H (Current)04/03/2017
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Nickel Alloy, Corrosion- and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb (Nb) - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast, As Cast, or Solution Treated, or Solution and Precipitation HardenedAMS5410C (Current)05/12/2022
This specification covers a corrosion and heat resistant vacuum melted nickel alloy in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Aluminum Alloy Castings, Investment 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat TreatedAMS4261G (Current)03/30/2017
This specification covers an aluminum alloy in the form of investment castings
AMS D Nonferrous Alloys Committee
Material Specification
Copper Sheet, Strip, and Plate Oxygen-Free, Light Cold RolledAMS4501F (Current)04/04/2017
This specification covers one type of copper in the form of sheet, strip, and plate
AMS D Nonferrous Alloys Committee
Material Specification
Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface PassivationAMSSTD753B (Current)04/04/2017
This standard describes general and detailed methods of sampling and testing for surface passivity of corrosion-resistant steel parts. These tests may also be useful to determine if there is a need for passivation
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Steel Bars and Forgings, High Expansion 9.5No - 5.5Mn (0.55 - 0.65C) AnnealedAMS5623D (Current)04/03/2017
This specification covers a high-expansion steel in the form of bars, forgings, and forging stock
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Grease: Wide Temperature Range Lithium or Lithium Complex Thickened for Aircraft Wheel BearingsAMS3058A (Current)08/09/2018
This specification covers grease for use on aircraft wheel bearings. It also defines the quality control requirements to assure batch conformance and materials traceability, and the procedures to manage and communicate changes in the grease formulation and brand. This specification invokes the Performance Review Institute (PRI) product qualification process. Requests for submittal information may be made to the PRI at the address in 2.2, referencing this specification. Products qualified to this specification are listed on a Qualified Products List (QPL) managed by the PRI. Additional tests and evaluations may be required by individual equipment builders before a grease is approved for use in their equipment. Approval and/or certification for use of a specific grease in aero and aero-derived marine and industrial applications is the responsibility of the individual equipment builder and/or governmental authorities and is not implied by compliance with or qualification to this
AMS M Aerospace Greases Committee
Material Specification
Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure Metric (SI) MeasurementMAM2304C (Current)06/27/2007
This specification covers steel cleanliness requirements in metric SI units for special aircraft-quality ferromagnetic steels, other than hardenable corrosion resistant steels, by magnetic particle inspection methods
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Radiographic Film, 5-80AMS7295/1C (Current)02/20/2006
This specification covers one type of high-contrast, fine-grain radiographic film in the form of cut sheets or rolls
AMS K Non Destructive Methods and Processes Committee
Material Specification
Radiographic Film, 4-80AMS7295/3C (Current)02/20/2006
This specification covers one type of medium-contrast, fine-grain radiographic film in the form of cut sheets or rolls
AMS K Non Destructive Methods and Processes Committee
Material Specification
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1 Inch (25 mm), 0.08 to 1.65 Ounces per Yard (2.5 to 51.2 g/mAMS3793/4B (Current)09/11/2013
This specification covers twelve classes of para-aramid tape and webbing of a single width and with varying weights
AMS P Polymeric Materials Committee
Material Specification
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 9/16 Inch (14 mm), 0.08 to 0.13 Ounces per Yard (2.5 to 4.0 g/mAMS3793/2B (Current)09/11/2013
This specification covers two classes of para-aramid tape and webbing of a single width and with varying weights
AMS P Polymeric Materials Committee
Material Specification
Steel, Bars, Forgings, and Tubing, 0.80cr 1.8ni 0.25mo (0.38 0.43MAM6415C (Current)03/12/2003
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock procured in SI (Metric) units. AMS 6415 is the inch/pound version of this MAM. These products have been used typically for parts, 90 millimeters and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 1110 recommends practices to minimize such conditions
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Radiographic Film, 5-60AMS7295/2C (Current)02/20/2006
This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls
AMS K Non Destructive Methods and Processes Committee
Material Specification
UREA COMPOUND, SHOTTEDAMS1730A (Current)08/10/2011
This specification covers a urea compound in the form of a solid
G-12 Aircraft Ground Deicing Steering Group
Material Specification
SKIN PROTECTIVE COMPOUND Chemical BarrierAMS1725A (Current)08/10/2011
This specification covers three types of semi-solid skin protective compounds in the form of barrier creams
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/8 Inch (9.5 mm), 0.035 Ounces per Yard (1.09 g/mAMS3793/11A (Current)09/11/2013
This specification covers one class of para-aramid tape and webbing of a single width and with varying weights
AMS P Polymeric Materials Committee
Material Specification
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.70 ounce per linear yard (28 g/linear mAMS3782/5B (Current)09/11/2013
This specification covers one weight and type of para-aramid webbing
AMS P Polymeric Materials Committee
Material Specification
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.35 ounce per linear yard (14 g/linear mAMS3782/3B (Current)09/11/2013
This specification covers one weight and type of para-aramid webbing
AMS P Polymeric Materials Committee
Material Specification
Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/3A (Current)11/19/2019
This specification covers the specific requirements for aluminum alloy 2024 bar, rod, shapes, tube, and wire produced by extrusion
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy 6162, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/17A (Current)06/18/2007
This specification covers the specific requirements for aluminum alloy 6162 bar, rod, shapes, tube, and wire produced by extrusion
AMS D Nonferrous Alloys Committee
Material Specification
Sprayed Metal Finish, AluminumAMS2450G (Current)06/13/2007
This specification covers the procedure to be used for spraying metallic parts with aluminum and the properties of the coating
AMS B Finishes Processes and Fluids Committee
Material Specification
Castings, Sand, 4.5Cu - 1.1Si, Solution and Precipitation Heat TreatedAMS4231G (Current)02/11/2005
This specification covers an aluminum alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
Material Specification
Castings, Sand, 10Mg, Solution Heat Treated and Naturally AgedAMS4240G (Current)02/11/2005
This specification covers an aluminum alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
Material Specification
Steel, Welding Wire 2.0Cr - 10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment Controlled PackagingAMS6533C (Current)09/21/2020
This specification covers a premium aircraft-quality alloy steel in the form of welding wire
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Aluminum Alloy, Rolled or Cold Finished Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially AgedAMS4318A (Current)02/11/2005
This specification covers an aluminum alloy in the form of bars and rods 0.375 to 0.874 inch (9.52 to 22.20 mm) in nominal diameter or least distance between parallel sides
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy Plate, Alclad - 5.6zn - 2.5mg - 1.6cu - 0.26cr (Alclad 7075-T651AMS4039C (Current)01/01/1968
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 4049, ALUMINUM ALLOY SHEET AND PLATE (Alclad 7075; -T6 Sheet, -T651 Plate). The requirements of the latest issue of AMS 4049 shall be fulfilled whenever reference is made to this specification
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Plate, Alclad 4.4cu 1.5mg 0.60mAMS4034C (Current)01/01/1968
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 4041, ALUMINUM ALLOY SHEET AND PLATE, ALCLAD (Alclad 2024 and 1-1/2% Alclad 2024-T3 Flat Sheet; 1-1/2% Alclad 2024-T351 Plate). The requirements of the latest issue of AMS 4041 shall be fulfilled whenever reference is made to this specification
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mnAMS4033C (Current)01/01/1968
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 4037, ALUMINUM ALLOY SHEET AND PLATE (2024; -T3 Flat Sheet, -T351 Plate). The requirements of the latest issue of AMS 4037 shall be fulfilled whenever reference is made to this specification
AMS D Nonferrous Alloys Committee
Material Specification
ALUMINUM ALLOY WELDING WIRE 7.0Si - 0.52Mg (357.0AMS4188/5 (Current)12/16/2002
This specification covers an aluminum alloy in the form of extruded or drawn welding wire
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Impact Extrusions 5.6zn 2.5mg 1.6cu 0.25cr (75s-T6AMS4170 (Current)01/01/1987
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, ExtrusionsAMS4155B (Current)01/01/1966
SUPERSEDING SPECIFICATION: The requirements of this specifications are embodied in the latest issue of AMS 4150, ALUMINUM ALLOY EXTRUSIONS (6061-T6). The requirements of the latest issue of AMS 4150 shall be fulfilled whenever reference is made to this specification
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Forgings, 5.6zn 2.5mg 1.6cu 0.25crAMS4139H (Current)09/01/1996
This specification has been declared 'CANCELLED' by the Aerospace Materials Division, SAE, as of September 1996, and has been superseded by AMS 4126. Alloy: 7075-T6 UNS Number: A97075
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-HardenedAMS4309B (Current)04/04/2017
This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5 m
AMS D Nonferrous Alloys Committee
Material Specification
Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 80Ni - 15.5Cr - 0.62Ti - 3.25Al AnnealedAMS5550F (Current)04/03/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet and strip
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Alloy Welding Wire, Corrosion and Heat Resistant 75Ni - 15.5Cr - 8.0FeAMS5683G (Current)04/03/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Cloth, Nylon Twill 3.3 ounces per square yard (112 g/mâ‚‚), Smooth FinishAMS3788/1B (Current)10/01/1995
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995
AMS P Polymeric Materials Committee
Material Specification
Bearings, Silver Plated Steel BackAMS4815G (Current)02/02/2007
This specification covers bearings of low-carbon steel plated on one or both faces with silver
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Tubing Hydraulic (6062 T4AMS4091A (Current)01/01/1966
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest of AMS 4081, ALUMINUM ALLOY TUBING, HYDRAULIC (6061-T4). The requirements of the latest issue of AMS 4081 shall be fulfilled whenever reference is made to this specification
AMS D Nonferrous Alloys Committee
Material Specification
Items per page:
1 – 50 of 212628