Results

Items (212,684)

Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range

01/22/2025

This specification covers a nickel alloy in the form of wire, rod, strip, foil, tape, and powder and a viscous mixture (paste) of the powder in a suitable binder

AMS F Corrosion and Heat Resistant Alloys Committee

Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

AMS4221F (Current)

01/22/2025

This specification covers an aluminum alloy in the form of plate 1.500 to 6.000 inches (38.10 to 152.40 mm) in nominal thickness (see 8.6

AMS D Nonferrous Alloys Committee

FOAM, FIRE EXTINGUISHING LIQUID Protein and Fluoroprotein

AMS1800 (Current)

08/10/2011

This specification covers two types of fire extinguishing foam concentrate in the form of a liquid

AMS J Aircraft Maintenance Chemicals and Materials Committee

Aluminum Sheet and Plate, 0.12Cu (1100-0), Annealed

AMS4001J (Current)07/13/2007

This specification covers aluminum in the form of sheet and plate

AMS D Nonferrous Alloys Committee

Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement

MAM2301C (Current)06/18/2007

This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferromagnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods

AMS E Carbon and Low Alloy Steels Committee

COMPOUND, CARBON REMOVING, ORTHODICHLOROBENZENE for Engine Parts

AMS1546 (Current)

08/10/2011

This specification covers a compound based on orthodichlorobenzene in the form of a liquid

AMS J Aircraft Maintenance Chemicals and Materials Committee

Cleaner for Aircraft Components Cold Tank Type, Solvent-Base

AMS1536C (Current)09/05/2018

This specification covers a tank-type cleaner in the form of a liquid

AMS J Aircraft Maintenance Chemicals and Materials Committee

Radiographic Film, 4-60

AMS7295/4C (Current)02/20/2006

This specification covers on a type of medium-contrast, medium-grain radiographic film in the form of cut sheets or rolls

AMS K Non Destructive Methods and Processes Committee

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1/2 Inch (12.5 mm), 0.06 to 0.56 Ounces per Yard (1.9 to 17.4 g/m

AMS3793/1B (Current)09/11/2013

This specification covers four classes of para-aramid tape and webbing of a single width and with varying weights

AMS P Polymeric Materials Committee

Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.50 ounce per linear yard (20 g/linear m

AMS3782/4B (Current)09/11/2013

This specification covers one weight and type of para-aramid webbing

AMS P Polymeric Materials Committee

Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification

AMSQQA200C (Current)

11/19/2019

This specification covers the general requirements for aluminum alloy bar, rod, shapes, structural shapes, tube, and wire extruded. Specific requirements for these products in a particular alloy are covered by the applicable detailed specification (See 6.3

AMS D Nonferrous Alloys Committee

Steel, Bars and Forgings, 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C), Vacuum Melted, Annealed, Heat Treatable to 290 ksi (1999 MPa) Tensile Strength

AMS6478B (Current)09/30/2005

This specification covers a premium aircraft-quality alloy steel in the form of bars, forgings, and forging stock. These products have been used typically for parts requiring a combination of high strength, high toughness, and weldability, but usage is not limited to such applications. Product after proper heat treatment should attain a minimum tensile strength of 290 ksi (1999 MPa) and yield strength of 245 ksi (1689 MPa

AMS E Carbon and Low Alloy Steels Committee

Welding Electrodes, Covered, Corrosion and Heat-Resistant Steel, 16.5Cr - 4.5Ni - 2.9Mo - 0.10N

AMS5775E (Current)08/24/2007

This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes

AMS F Corrosion and Heat Resistant Alloys Committee

Aluminum Alloy, Sheet and Plate, Alclad, 6.8Zn - 2.8Mg - 2.0Cu - 0.23Cr (Alclad 7178-O), Annealed

AMS4051G (Current)02/11/2005

This specification covers an aluminum alloy in the form of sheet and plate

AMS D Nonferrous Alloys Committee

Plastic Sheet, Copper Faced, Glass Cloth Reinforced Polytetrafluoroethylene

AMS3598E (Current)05/01/1995

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995

AMS P Polymeric Materials Committee

Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished

AMS5624F (Current)

04/04/2017

This specification covers an alloy steel in the form of bars 1 inch (25.4 mm) and under in nominal diameter or distance between parallel sides

AMS F Corrosion and Heat Resistant Alloys Committee

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/8 Inch (15.9 mm), 0.25 Ounces per Yard (7.75 g/m

AMS3793/12A (Current)09/11/2013

This specification covers one class of para-aramid tape and webbing of a single width and with varying weights

AMS P Polymeric Materials Committee

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/16 Inch (7.9 mm), 0.053 Ounces per Yard (1.64 g/m

AMS3793/10A (Current)09/11/2013

This specification covers one class of para-aramid tape and webbing of a single width and with varying weights

AMS P Polymeric Materials Committee

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardened (H1025) Consumable Electrode Remelted

AMS5622/H1025 (Current)

01/15/2015

This specification covers a corrosion-resistant steel product in the solution and precipitation heat treated (H1025) condition

AMS F Corrosion and Heat Resistant Alloys Committee

Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification

AMSR6855B (Current)12/14/2010

This specification covers the requirements for low temperature resistant sheets, strips, and molded or extruded shapes fabricated from synthetic rubber

AMS CE Elastomers Committee

Inserts, Thread Form Phosphor Bronze, 95cu 4.6sn 0.19p

AMS7247D (Current)01/01/1991

AMS D Nonferrous Alloys Committee

Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded

AMS4350N (Current)

10/25/2017

This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles

AMS D Nonferrous Alloys Committee

Rivets, Alloy Corrosion and Heat Resistant, 52co 20cr 10ni 15w, Solution Heat Treated

AMS7236D (Current)11/01/1995

Alloy: L-605 UNS Number: R30605

AMS F Corrosion and Heat Resistant Alloys Committee

Rings, Sealing, Phosphonitrilic Fluoroelastomer (FZ) Aviation Fuel Resistant 65 - 75 Shore

AMS7284/1A (Current)05/03/2016

This specification covers a phosphonitrilic fluoroelastomer (FZ) in the form of molded rings. Primarily for use in aircraft fuels systems operating from -55 to +150 degrees C (-67 to 302 degrees F

AMS CE Elastomers Committee

Radiographic Film and Paper, Industrial Grade

AMS7295C (Current)02/20/2006

This specification and its supplementary detail specifications cover radiographic film and paper in the form of cut sheet or rolls

AMS K Non Destructive Methods and Processes Committee

Polyurethane, Foam-In-Place, Rigid Closed Cell, for Helmet Liners

AMS3574A (Current)03/01/1995

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of March 1995. By this action, subject specification number and title will be deleted from the active specification index of Aerospace Material Specifications

AMS CE Elastomers Committee

Welding Electrodes, Covered, Steel 0.07 - 0.15C

AMS5031G (Current)

10/20/2017

This specification covers a low-carbon steel in the form of covered welding electrodes

AMS E Carbon and Low Alloy Steels Committee

Aluminum Alloy, Plate (7085-T7451) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged

AMS4470C (Current)

12/27/2018

This specification covers an aluminum alloy in the form of plate 3.000 to 7.000 inches (76.20 to 177.80 mm) in nominal thickness (see 8.5

AMS D Nonferrous Alloys Committee

TAPE, NYLON, NONMELTING, REINFORCING 5/16 (8) Wide, 350 (1555 N) Breaking Strength

AMS3777/6 (Current)10/01/1995

This specification covers one width and strength of nylon tape

AMS P Polymeric Materials Committee

Yarn, Organic Fiber (Para-Aramid), High Modulus 195 Denier (215 d tex), 1.2% Finish

AMS3901/8C (Current)04/30/2015

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement

AMS P17 Polymer Matrix Composites Committee

Aluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated

AMS4281G (Current)

05/19/2014

This specification covers an aluminum alloy in the form of permanent mold castings

AMS D Nonferrous Alloys Committee

Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 (1580 d tex) Denier, 1.2% Finish

AMS3901/11C (Current)07/31/2014

AMS P17 Polymer Matrix Composites Committee

TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 1000 (4450 N) Breaking Strength

AMS3777/3 (Current)10/01/1995

This specification covers one width and strength of nylon tape

AMS P Polymeric Materials Committee

Yarn, Organic Fiber (Para-Aramid), High Modulus 2450 (2720 d tex) Denier, 0.6% Finish

AMS3901/13B (Current)07/31/2014

AMS P17 Polymer Matrix Composites Committee

Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective

AMSC83445A (Current)

03/09/2001

This specification covers the requirements for one type of thermally reflective non-yellowing white rain erosion resistant polyurethane coating system

AMS G8 Aerospace Organic Coatings Committee

Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened

AMS3052A (Current)

05/16/2018

This specification covers grease for use within an aircraft. It also defines the quality control requirements to assure batch conformance and materials traceability, and the procedures to manage and communicate changes in the grease formulation and brand. This specification invokes the Performance Review Institute (PRI) product qualification process. Requests for submittal information may be made to the PRI at the address in 2.2, referencing this specification. Products qualified to this specification are listed on a Qualified Products List (QPL) managed by the PRI. Additional tests and evaluations may be required by individual equipment builders before a grease is approved for use in their equipment. Approval and/or certification for use of a specific grease in aero and aero-derived marine and industrial applications is the responsibility of the individual equipment builder and/or governmental authorities and is not implied by compliance with or qualification to this specification

AMS M Aerospace Greases Committee

Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated

AMS3849C (Current)

12/15/2016

This specification covers one type of quartz cloth impregnated with a heat-reactive, thermosetting, hot-melt, addition-type, polyimide resin system, furnished in continuous rolls of full width material

AMS P17 Polymer Matrix Composites Committee

Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus

AMS3892/1C (Current)12/16/2016

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation

AMS P17 Polymer Matrix Composites Committee

PLASTIC ROD AND BAR, POLYIMIDE Unfilled, Molded

AMS3644/1 (Current)09/01/1994

This specification covers an unfilled polyimide plastic in the form of molded rod and bar

AMS P Polymeric Materials Committee

Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered

AMS4871H (Current)

09/13/2015

This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings

AMS D Nonferrous Alloys Committee

Sealing Compound, Low Adhesion, Corrosion Inhibiting, for Removable Panels and Fuel Tank Inspection Plates

AMS3267B (Current)07/22/2004

This specification and its supplementary detail specifications cover accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength, supplied as a two-component system, curing at room temperature. This product has been used typically for sealing aircraft access doors and accessories where gaskets are required, but usage is not limited to such applications. The sealing compounds are resistant to both jet fuels and high aromatic aviation gasolines and are useable from -55 to +120 degrees C (-67 to +249 degrees F

AMS G9 Aerospace Sealing Committee

Standard Elastomer Stocks Test Slabs

AMS3217A (Current)

11/16/2016

This specification and its supplementary detail specifications cover various elastomeric standard compounds in the form of molded test slabs 0.075 × 6 × 6 inches (1.90 × 152 × 152 mm

AMS CE Elastomers Committee