Search
Advanced Search
of the following are true
(
)

Results

Items (211,952)
Circuit Protection and Switch Device Committee
This specification covers a butyl (IIR) rubber in the form of sheet, strip, extrusions, and molded shapes.
AMS CE Elastomers Committee
This specification covers a polychloroprene (CR) rubber, resin modified, solvent-type contact adhesive in the form of a liquid.
AMS P Polymeric Materials Committee
This specification covers procedures for approval of premium-quality forgings, usually serialized, the stock from which such forgings are produced, and the controls to be exercised in producing the forgings and forging stock.
AMS E Carbon and Low Alloy Steels Committee
This specification covers an aluminum alloy in the form of sheet 0.008 to 0.126 inch (0.20 to 3.20 mm), inclusive, in nominal thickness, with a grain size of ASTM No. 6 or finer (see 8.5).
AMS D Nonferrous Alloys Committee
This specification covers bearings of leaded copper cast on one or both faces of a steel backing.
AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of sheet and plate, alclad two sides, 0.188 to 1.750 inch (4.775 to 44.450 mm) inclusive, in thickness, supplied in the annealed (O) condition (see 8.5).
AMS D Nonferrous Alloys Committee
This specification covers the requirements for electrodeposited tin-zinc alloy plating.
AMS B Finishes Processes and Fluids Committee
This specification covers a cleaner for plastics in the form of a liquid.
AMS J Aircraft Maintenance Chemicals and Materials Committee
This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 6.000 inches (0.551 to 152.4 mm), inclusive, in thickness (see 8.5).
AMS D Nonferrous Alloys Committee
This specification defines the equipment, procedures, and requirements for joining leads by parallel gap resistance welding.
AMS B Finishes Processes and Fluids Committee
This specification covers a honeycomb core fabricated from a corrosion and heat-resistant steel.
AMS F Corrosion and Heat Resistant Alloys Committee
This SAE Standard specifies requirements for the processing of iron and steel (excluding corrosion resisting steels) to produce coatings consisting essentially of inorganic phosphates, which are intended to be used in conjunction with supplementary finishes for the protection of the basis metal against corrosion (and in certain cases to give, additionally, anti-wear properties to sliding surfaces).
AMS B Finishes Processes and Fluids Committee
This specification covers an aluminum alloy in the form of sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg.
AMS D Nonferrous Alloys Committee
This specification covers aluminum alloy die forgings and hand forgings.
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat-resistant steel in the form of welding wire.
AMS F Corrosion and Heat Resistant Alloys Committee
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.
AMS K Non Destructive Methods and Processes Committee
This specification covers a corrosion and heat resistant cobalt alloy in the form of sand castings.
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers one type of copper-beryllium alloy in the form of wire.
AMS D Nonferrous Alloys Committee
This specification covers a magnesium alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
This specification covers premium quality bolts and screws made from a low-alloy, heat-resistant steel and having threads of UNJ (MIL-S-8879) form.
E-25 General Standards for Aerospace and Propulsion Systems
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes up through 10.000 inches (254.00 mm) inclusive in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.
AMS G Titanium and Refractory Metals Committee
This SAE Standard gives guidance for - and specifies the requirements for - the electrodeposition of chromium for engineering purposes. It relates to both new articles and also the reclamation of worn or over-machined components. Chromium electrodeposition undertaken for decorative purposes is not considered herein.
AMS B Finishes Processes and Fluids Committee
This specification covers a magnesium alloy in the form of extruded bars, rods, wire, tubing, and profiles.
AMS D Nonferrous Alloys Committee
This specification covers an alclad aluminum alloy in the form of sheet and plate.
AMS D Nonferrous Alloys Committee
This specification describes the engineering requirements for producing an electrically-insulating, non-powdery anodic coating on titanium and titanium alloys and the properties of such coatings.
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for a refined paraffinic petroleum-base lubricant.
AMS B Finishes Processes and Fluids Committee
This specification covers a ready-mixed thixotropic compound in the form of a stable film-forming compound suitable for application by brushing or spraying.
AMS J Aircraft Maintenance Chemicals and Materials Committee
This specification covers an aluminum alloy in the form of die castings.
AMS D Nonferrous Alloys Committee
This specification covers aluminum alloy sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg. The outer layers are always aluminum alloy.
AMS D Nonferrous Alloys Committee
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
This specification covers a corrosion and heat resistant steel in the form of sand or centrifugal castings.
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 5.0 inches (127mm) in least nominal cross-sectional dimension having a cross-sectional area not greater than 50 in2 (323 cm2), and stock of any size for forging or flash welded rings (see 8.5).
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers the procedures for identification and marking of bare welding wire by a color code system and marking of spools.
AMS B Finishes Processes and Fluids Committee
This specification covers boron filaments and 6061-0 aluminum alloy foil laminated and bonded into a composite sheet.
AMS D Nonferrous Alloys Committee
Items per page:
1 – 50 of 211952