Search
Advanced Search
of the following are true

Results

Items (208,252)
This specification covers pyrometric requirements for equipment used for the thermal processing of metallic materials. Specifically, it covers temperature sensors, instrumentation, thermal processing equipment, correction factors and instrument offsets, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s
AMS B Finishes Processes and Fluids Committee
AS22759 specification covers fluoropolymer-insulated single conductor electrical wires made with tin-coated, silver-coated, or nickel-coated conductors of copper or copper alloy as specified in the applicable detail specification. The fluoropolymer insulation may be polytetrafluoroethylene (PTFE), fluorinated ethylene propylene (FEP), polyvinylidene fluoride (PVF2), ethylene-tetrafluoroethylene copolymer (ETFE), or other Fluoropolymer resin. The fluoropolymer may be used alone or in combination with other insulation materials. These abbreviations shall be used herein. When a wire is referenced herein, it means an insulated conductor (see 7.7
AE-8D Wire and Cable Committee
This SAE Aerospace Recommended Practice (ARP) provides a framework for establishing methods and stakeholder responsibilities to ensure that seats with integrated electronic components (e.g., actuation system, reading light, inflatable restraint, in-flight entertainment equipment, etc.) meet the seat technical standard order (TSO) minimum performance standards (MPS). These agreements will allow seat suppliers to build and ship TSO-approved seats with integrated electronic components. The document presents the roles and accountabilities of the electronics manufacturer (EM), the seat supplier, and the TC/ATC/STC applicant/holder in the context of AC 21-49, Section 7.b (“Type Certification Using TSO-Approved Seat with Electronic Components Defined in TSO Design”). This document applies to all FAA seat TSOs C39( ), C127( ), etc. The document defines the roles and responsibilities of each party involved in the procurement of electronics, their integration on a TSO-approved seat, and the
Aircraft Seat Committee
This SAE Aerospace Recommended Practice (ARP) provides recommended use and installation procedures for bonded cable harness supports
AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install
This specification covers a magnesium alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This specification covers a copper-nickel-tin alloy in the form of castings, made using the investment process unless sand or centrifugal processes are agreed upon by the purchaser (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet and strip up to 0.187 inch (4.75 mm) thick, inclusive, and plate up to 4.000 inches (101.6 mm) thick, inclusive
AMS F Corrosion and Heat Resistant Alloys Committee
This SAE Aerospace Information Report (AIR) is a process verification guide for evaluating implementation of key factors in repair of fiber reinforced composite bonded parts or assemblies in a repair shop, hangar, or on-wing environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair and is intended to promote consistency and reliability
AMS CACRC Commercial Aircraft Composite Repair Committee
The scope of this SAE Information Report is limited to a lift crane mounted on a fixed or floating platform, lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a workboat as defined in 3.15
Cranes and Lifting Devices Committee
The scope of this SAE Recommended Practice is limited to cranes mounted on a fixed platform lifting loads from a vessel alongside. The size of the vessel is assumed not to exceed that of a work boat as defined in 3.14
Cranes and Lifting Devices Committee
This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers
Agricultural Tractor Standards Committee (ATSC)
This SAE Standard covers the complete dimensional and general specifications, including physical properties and methods of testing, for those types of lock washers intended for use in automotive and general industrial applications
Fasteners Committee
Included herein are the detailed general and dimensional specifications applicable to high hex nuts. All general specifications not shown here shall conform with those applicable to hex thick nuts and hex thick slotted nuts appearing in ASME B18.2.2. High hex nuts are primarily intended for use in automotive and other ground-based vehicles and industrial equipment where a long length of hexagon is required for wrenching purposes
Fasteners Committee
This SAE Recommended Practice documents nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories
Cooling Systems Standards Committee
This SAE Standard covers the requirements for the deposition of cadmium coatings on carbon steel, low alloy steels, high strength steels, corrosion resisting steels and other materials where appropriate
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice is intended to apply to lamps, batteries, heaters, radios, and similar equipment for operation with mobile or automotive diesel engines. Twenty-four V systems have long been used for heavy-duty services because 24 V permit operating 12 V systems in series-parallel. Thirty-two V systems have been used for marine, railroad-car lighting, and other uses. Generators, storage batteries, starting motors, lighting, and auxiliary electrical equipment shall be for nominal system ratings of 12, 24, or 32 V as determined by the power requirements of the application. It is recommended that no intermediate voltages be considered. The combination of a 24 V starting motor and two 12 V batteries connected in series for cranking is considered practical where it can be adapted to the installation. The batteries are reconnected in parallel for charging from a 12 V generator/alternator and for operating lights and other auxiliary equipment, or charged separately and used
Electrical Systems
The negative side of the storage battery shall be securely and adequately grounded so that the voltage drop to the starting motor is held within the limits specified in the current edition of SAE J541
Electrical Systems
The complete requirements for procuring the product shall consist of this document and the latest Issue of the basic specification, AMS2431
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for qualification, requalification, and certification of etch inspectors
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for thermal spray coatings applied using the high velocity oxygen fuel (HVOF) combustion process. This specification is not intended to be used for duplex coatings, i.e., the application of the coating over a previously applied coating
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements for electroless deposition of nickel-boron on various materials and the properties of the deposit
AMS B Finishes Processes and Fluids Committee
This recommended practice provides general recommendations for welding structural assemblies for aerospace ground support equipment
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements and process for brush plating of tin by electrodeposition. It shall be used, in conjunction with AMS2451, for general purpose tin deposits
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for electrodeposited silver on other metals, usually with a nickel strike between the basis metal and the silver
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for identification of castings
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements forproducing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of nickel alloy filler metal
AMS B Finishes Processes and Fluids Committee
This Aerospace Standard covers components of rotary flap assemblies to be used with portable equipment for peening of metal parts. The flap assemblies consist of a flap attached to a mandrel and shall be of the following sizes
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for three types and three classes for vacuum deposited cadmium coating
AMS B Finishes Processes and Fluids Committee
This specification covers a denatured ethyl alcohol in the form of a liquid
AMS B Finishes Processes and Fluids Committee
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process
AMS B Finishes Processes and Fluids Committee
This specification establishes the requirements for chromate conversion coatings on magnesium alloys
AMS B Finishes Processes and Fluids Committee
This specification has been declared "SUPERSEDED" by the Aerospace Materials Division, SAE, as of October, 1991
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for equipment, materials and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion resistance or producing surfaces suitable for the application of a protective organic finish
AMS B Finishes Processes and Fluids Committee
This specification covers procedures for identifying bars, wire, mechanical tubing, and extrusions of carbon and alloy steels and corrosion and heat-resistant steels and alloys
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements for cadmium deposited on ferrous and nonferrous metals
AMS B Finishes Processes and Fluids Committee
This SAE Aerospace Recommended Practice (ARP) describes a method for classifying the frequencies of analysis of solutions used in the processing of metals, such as electroplating, anodizing, and conversion coating and associated processes but usage is not limited to such applications
AMS B Finishes Processes and Fluids Committee
This specification covers the engineering requirements for finishing aircraft parts and assemblies with an engine gray enamel
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for inducing compressive residual stresses on the surface of metal parts using ultrasonically activated shot peening
AMS B Finishes Processes and Fluids Committee
This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks, and commercial vehicles (on and off road) that use automotive type mobile air conditioning (MAC) systems. Large trucks, buses, and other vehicles that do not use typical automotive A/C systems or use refrigerants not listed in this document are not covered by this standard. This standard covers vehicles with MAC systems using belt driven compressors and electric motor driven compressors. This document provides industry-recognized standards for the design, assembly, and test of MAC systems, including necessary service equipment, and is intended to cover all phases of the lifetime of MAC systems to minimize environmental, health, and safety impacts. The standards listed in this document cover the currently accepted industry guidelines and procedures. The standards can be used as requirements for regulatory authorities to meet minimum environmental
Interior Climate Control Vehicle OEM Committee
This Recommended Practice applies to engine cooling fans up to 2000 mm in diameter with a mounting interface consisting of a pilot hole and a circular bolt pattern. Most of these fans are belt, gear, clutch, hydraulically, or electrically driven
Cooling Systems Standards Committee
Circuit Protection and Switch Device Committee
The recommended practice applies to straight blade, angling blade, U blade, and semi-U blades used on earthmoving tractors per SAE J1057a up to a maximum weight of 100,000 lb (45,000 kg
MTC1, Earthmoving Machinery
This SAE Standard applies to all machines with shovel, clam, or dragline attachment
MTC1, Earthmoving Machinery
This specification establishes the engineering requirements for producing chemical-film coatings on aluminum and aluminum alloys and the properties of such coatings
AMS B Finishes Processes and Fluids Committee
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements and provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment
Lighting Materials Standards Committee
This SAE Standard specifies the dimensional requirements necessary for the mounting and interchangeability of two types of fuel injectors in diesel engines. The location and dimensions of the fuel inlet, leak-off connections, and flange design are not defined since they may vary according to the particular application. Field of Application This document is applicable to nozzle holder types 5 and 6 of a flange mounted design with a 21.0 mm (nominal) shank diameter used with size S nozzles specified in ISO 2697. The internal construction of the fuel injector remains optional with the manufacturer
Diesel Fuel Injection Equipment Standards Committee
This specification covers the requirements for a refined paraffinic petroleum-base lubricant
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 208252