Search
Advanced Search
of the following are true

Results

Items (208,493)
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390
CTTC C2, Electrical Components and Systems
This document establishes a procedure for disposition of landing gear components that have been involved in accidents/incidents. The recommendations in this document apply to components made of ferrous and non-ferrous alloys. The recommendations in this document do not apply to components made of non metallic composite materials
A-5B Gears, Struts and Couplings Committee
This recommended practice describes a process for testing the comprehension of static (i.e., fixed or non-dynamic) symbols for all ground vehicles, for both OEM and aftermarket products. With advancing display technology, it is now possible to display dynamic symbols (e.g., a spinning beach ball to show that a process is ongoing, or a diagram showing energy distribution in hybrid vehicles). Such graphics are outside of the scope of this recommended practice, though extensions of this process may be useful for testing them. However, several symbols which occupy the same space on a display may change state without movement (e.g. play/pause button); these are within the scope of this recommended practice. The process described in this recommended practice includes criteria that are used to identify how well the perceived meaning matches the intended meaning for a representative sample of drivers. The data from this process are analyzed to determine the drivers’ comprehension of the symbol
Driver Vehicle Interface (DVI) Committee
The design and location of rear-viewing mirrors or systems, and the presentation of the rear view to the driver can best be achieved if the designer and the engineer have adequate references available on the physiological functions of head and eye movements and on the perceptual capabilities of the human visual system. The following information and charts are provided for this purpose. For more complete information of the relationship of vision to forward vision, see SAE SP-279
Driver Vision Standards Committee
This specification covers the specific requirements for 2024 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy 2024 core with thin layers of an aluminum alloy 1230 (99.30 percent minimum aluminum) anodic to the core and of approximately equal thickness, bonded to both surfaces
AMS D Nonferrous Alloys Committee
This report proposes a methodology for applying weighting factors to system effectiveness quantification expressions of mathematical models for multi-function situations. Since the circumstances for applying "W" and "U" terms are almost unlimited, no attempt is made to show all possible applications of these terms. Rather, the basic principles are discussed and illustrated by simple examples in order to keep the focus on the principles for quantifying "W" and "U". The methods that are used at lower levels of the mission-function hierarchical tree are equally valid at higher levels. Consequently, the extension of these basic methods to more complicated situations was deliberately excluded from the content of this report
G-47 Systems Engineering
This Bulletin provides a comprehensive list of Terms and Definitions used in or related to TechAmerica prepared standards/documents. The information in these listings was extracted from standards and documents prepared by the Systems Engineering (G47), Configuration Management (G33), Life Cycle Logistics Supportability and Enterprise Information Management Interoperability Committees along with other pertinent international, industry and government standards. It is intended that this bulletin be used as a resource to help with harmonization of terms and definitions across standards. One should be cognizant of the release date of this Bulletin and understand that updates to the included standards and handbooks after this Bulletin was released may affect its accuracy
G-47 Systems Engineering
This SAE Recommended Practice specifies recommendations for rear view mirror systems to provide the operator with a clear view to the rear. It is intended as a supplement to the requirements for motorcycle mirrors given in 49 CFR 571.111
Motorcycle Technical Steering Committee
This SAE Standard provides installation requirements, test procedures, design guidelines, and performance requirements for side turn signal lamps for vehicles less than 12 m in length
Signaling and Marking Devices Stds Comm
This SAE Recommended Practice provides test procedures, performance requirements, and design guidelines for adaptive driving beam (ADB) and associated equipment
Road Illumination Devices Standards Committee
This test method specifies the operating procedures for using a solar fresnel reflector apparatus for the accelerated exposure of various automotive materials
Textile and Flexible Plastics Committee
This SAE Standard defines requirements relating to the elements of design, operation, and maintenance of light utility vehicles (LUVs). The safety specifications in this document apply to any self-propelled, operator-controlled, off-highway vehicle 1829 mm (72 inches) or less in overall width, exclusive of added accessories and attachments, operable on three or more wheels or tracks, primarily intended to transport material loads or people, with a gross vehicle weight of 2500 kg (5500 pounds) or less, and a maximum design speed less than or equal to 40.23 km/h (25 mph). This document is not intended to cover go-karts (ASTM F2007-07a), fun-karts (ASTM F2011-02e1), dune buggies, and all terrain-vehicles (ATVs) complying with ANSI/SVIA 1
Special Purpose Vehicle Committee
This specification covers a neopentyl polyol ester fluid
AMS CE Elastomers Committee
This specification covers a nitrile rubber (NBR) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7289 specification
AMS CE Elastomers Committee
This specification covers high temperature, compression set, and fluid resistant fluorocarbon elastomer sheets, strips, molded parts, and extruded shapes for aeronautical and aerospace applications
AMS CE Elastomers Committee
This specification covers an ethylene propylene (EPM) rubber in the form of sheet, strip, tubing, molded shapes, and extrusions
AMS CE Elastomers Committee
This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes use the AMS3353 specification which is intended for that use
AMS CE Elastomers Committee
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, AMS7268 should be used
AMS CE Elastomers Committee
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material
AMS CE Elastomers Committee
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers a silicone (VMQ) elastomer, reinforced with glass cloth, in the form of sheet
AMS CE Elastomers Committee
This specification covers a synthetic rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material
AMS CE Elastomers Committee
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material
AMS CE Elastomers Committee
This specification covers two classes (durometers) of tetrafluoroethylene/propylene rubber (FEPM) in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7255 or AMS7256 specification, as appropriate
AMS CE Elastomers Committee
This specification covers an acrylonitrile-butadiene (NBR) rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, use the AMS3XXX specification which is intended for that use
AMS CE Elastomers Committee
This specification covers a standard chloroprene (CR) rubber stock in the form of molded test slabs
AMS CE Elastomers Committee
This specification covers a fluorocarbon rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes use AMS3216 specification which is intended for that use
AMS CE Elastomers Committee
This specification and its associated detail specifications cover phosphonitrilic fluoroelastomers (FZ) in the form of molded rings
AMS CE Elastomers Committee
This specification covers a tetrafluoroethylene/propylene rubber (FEPM) in the form of molded rings
AMS CE Elastomers Committee
This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings, compression seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications
AMS CE Elastomers Committee
This specification covers a Perfluorocarbon (FFKM) rubber in the form of molded rings, compression seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications
AMS CE Elastomers Committee
The Mounting Height Task Force was tasked to determine the extent of the problem(s) associated with vehicle headlamps mounted at or above the level of the mirror(s) in passenger vehicles; the level of glare exposure caused by high-mounted headlamps; the appropriate height differential needed to maintain a glare level consistent with past and/or current passenger vehicle headlamp mounting; and the necessary headlamp mounting height necessary to control mirror glare at an accepted/acceptable level. The report herein addresses these passenger vehicle mounting height issues
Road Illumination Devices Standards Committee
This SAE Recommended Practice establishes three alternate methods for describing and evaluating the truck driver's viewing environment: the Target Evaluation, the Polar Plot and the Horizontal Planar Projection. The Target Evaluation describes the field of view volume around a vehicle, allowing for ray projections, or other geometrically accurate simulations, that demonstrate areas visible or non-visible to the driver. The Target Evaluation method may also be conducted manually, with appropriate physical layouts, in lieu of CAD methods. The Polar Plot presents the entire available field of view in an angular format, onto which items of interest may be plotted, whereas the Horizontal Planar Projection presents the field of view at a given elevation chosen for evaluation. These methods are based on the Three Dimensional Reference System described in SAE J182a. This document relates to the driver's exterior visibility environment and was developed for the heavy truck industry (Class B
Truck and Bus Human Factors Committee
This document is intended to facilitate calculation of O-Ring tension testing values
AMS CE Elastomers Committee
No scope available
Engine and Airframe Technical Standards Committee (TSC)
This specification covers the requirements of composite blankets suitable for acoustical and thermal insulation of the walls of aircraft compartments within the temperature range of -65°F to +175°F (-54°C to +80°C
AMS CE Elastomers Committee
No scope available
Engine and Airframe Technical Standards Committee (TSC)
No scope available
Engine and Airframe Technical Standards Committee (TSC)
This SAE Aerospace Information Report (AIR) summarizes data and background relative to age control of specific classes of those nitrile type synthetic elastomers used in sealing devices which are resistant to petroleum base hydraulic fluids, lubricating oils, and aircraft fuels. This includes, but is not limited to, those nitrile (NBR or BUNA-N) elastomers previously covered by Section I of MIL-STD-1523
AMS CE Elastomers Committee
The information presented herein describes the commonly observed patterns of O-ring failure by means of both text and illustration. Possible causes and corrective actions are indicated for alleviating the problem
AMS CE Elastomers Committee
This specification is applicable to the processes that are used in the manufacture of aerospace elastomer parts utilizing materials conforming to AMS7XXX series specifications, user specifications, or print on a Purchase Order (PO) that calls out this document for aerospace applications. The elastomer parts are in the form of O-rings, plate seals and other compression seals
AMS CE Elastomers Committee
This standard establishes the inspection requirements and acceptance standards for optimum surface finish O-ring packings and gaskets. (This is not an O-ring specification per se
AMS CE Elastomers Committee
Items per page:
1 – 50 of 208493