Published 2017-11-08 by SAE International in United States
The CRABI dummy was developed to evaluate small child restraint systems in automotive crash environments, in all directions of impact, with or without air bag interaction Basic anthropometry for this test device was taken from the University of Michigan Transportation Research Institute Report 85-23. Weight distribution and scaling methods for the infant were approved by the Society of Automotive (SAE) Infant Dummy Task Group. The dummy weighs 17.2 pounds and has a 26.4 inches standing or 17.3 inches sitting height. The Hybrid Ill-like neck and lumbar spine are laterally notched to reduce lateral stiffness The shoulders have flesh support for durability and human-like performance in areas where seatbelt webbing may be placed. In addition, rubber elements are used in each joint to improve biofidelity and to give the CRABI infant-like range of motion. The CRABI Six-Month-Old design meets all the SAE Infant Dummy Task Group anthropometry, biomechanical and instrumentation requirements. The instrumentation design incorporates three 6-channel load cells to provide load measurements at the C1, C7 and L5 vertebrae locations. Accelerometers are used to measure…
Published 2017-10-11 by SAE International in United States
This user's manual covers the Hybrid III 10-year old child test dummy. The manual is intended for use by technicians who work with this test device. It covers the construction and clothing, assembly and disassembly, available instrumentation, external dimensions and segment masses, as well as certification and inspection test procedures. It includes guidelines for handling accelerometers, guidelines for flesh repair, and joint adjustment procedures. Finally, it includes drawings for some of the test equipment that is unique to this dummy.
Published 2017-10-02 by SAE International in United States
This user’s manual covers the instrumented arm for the Hybrid III 5th Percentile Small Female dummy as well as the SID –IIs dummy. It is intended for technicians and engineers who have an interest in assessing arm injury from the use of frontal and side impact airbags. It covers the construction, disassembly and reassembly, available instrumentation, and segment masses.
Published 2017-02-21 by SAE International in United States
This procedure establishes a recommended practice for performing a Lumbar Flexion test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which characterizes the lumbar without interaction of other dummy components. In the past, there have not been any tests to evaluate the performance of Hybrid III 50th lumbar.
Published 2016-08-03 by SAE International in United States
This procedure establishes a recommended practice for establishing the sensitivity of the chest displacement potentiometer assembly used in the Hybrid III family of Anthropomorphic Test Devices (ATDs, or crash dummies). This potentiometer assembly is used in the Hybrid III family to measure the linear displacement of the sternum relative to the spine (referred to as chest compression). An inherent nonlinearity exists in this measurement because a rotary potentiometer is being used to measure a generally linear displacement. As the chest cavity is compressed the potentiometer rotates, however the relationship between the compression and the potentiometer rotation (and voltage output) is nonlinear.
Published 2016-06-28 by SAE International in United States
This procedure establishes a recommended practice for performing a Low Speed Thorax Impact Test to the Hybrid III Small Female Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand by the industry to have a certification test which results in peak chest deflection similar to current full vehicle, frontal impact tests. An inherent problem exists with the current certification procedure because the normal (6.7 m/s) thorax impact test has test results for peak chest deflection that are greater than those currently seen in full vehicle, frontal tests. The intent of this document is to develop a low speed thorax certification procedure for the H-III5F dummy with a 3.0 m/s impact similar to the SAE J2779 procedure for the H-III50M dummy.
Published 2015-05-07 by SAE International in United States
This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which produces similar results to an actual low energy automotive impact test. An inherent problem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify a force requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.
Published 2015-02-03 by SAE International in United States
This user’s manual covers the small adult female Hybrid III test dummy. It is intended for technicians who work with this device. It covers the construction and clothing, disassembly and reassembly, available instrumentation, external dimensions and segment masses, as well as certification and inspection test procedures. It includes instructions for safe handling of the instrumented dummy, repairing dummy flesh, and adjusting the joints throughout the dummy.
A list of downloadable items.
Please Wait. Loading Available Formats...
This modal will allow the user to download citation information or export specific fields of data into one of three file formats: Excel, comma-separated values, or text.
Sorry, this document is already one of your favorites.
Share this content via social media.
Share Via Email
Email sent successfully!
Use this modal to save a search.
The current search and criteria have already been saved. Please modify your criteria to save as a new search.
Request Sent successfully!
Search Tips: Search Operators:AND, OR, NOT; Wild Cards; Using Quotes
SAE MOBILUS® Search Tips
Please note: All terms not contained within quotes, will be evaluated using the OR operator. This means that your search results will contain all results that contain ANY of the entered terms.
AND, OR, NOT
SAE MOBILUS supports the use of the AND, OR and NOT BOOLEAN operators ONLY function with the Advanced Search.
Using the asterisk, ( * ) allows you to search for a partial word. For example, entering a keyword search of aero* will search for any word beginning with aero.
Using the question mark, ( ? ) allows you to search for a word with a single character wildcard. For example, searching for t?re would match both tire and tyre
Words in double quotes " " are treated as a phrase. Conducting a search for "heat model" will return all results in which the exact phrase "heat model" is found, while "heat modeling" would NOT be included.
A term combined with a phrase will be joined with an OR operator.
Searching for Standards
When searching for a standard please use the entire Document Number assigned, which includes the abbreviation. A space can be used, or omitted between the abbreviation and number.