Search tips

Your Selections

TEVLCS2
Show Only

Filters

Collections

File Formats

Content Types

Dates

Sectors

Topics

Publishers

Committees

Committee Codes

   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_201708
  • Current
Published 2017-08-07 by SAE International in United States
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements and provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment.
This content contains downloadable datasets
Annotation ability available
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J1647_201505
  • Current
Published 2015-05-26 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic optical materials for possible use in discharge forward lighting (DFL) devices in motor vehicles. These materials are typically used for lenses and reflectors. Separate testing is required for each combination of material, industrial coating, DFL light source, and device focal length. The tests are intended to determine physical and optical characteristics of the materials and coatings. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Optical components exposed to weathering should also be subject to SAE J576.
This content contains downloadable datasets
Annotation ability available
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J1647_201501
  • Historical
Published 2015-01-15 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic optical materials for possible use in discharge forward lighting (DFL) devices in motor vehicles. These materials are typically used for lenses and reflectors. Separate testing is required for each combination of material, industrial coating, DFL light source, and device focal length. The tests are intended to determine physical and optical characteristics of the materials and coatings. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Optical components exposed to weathering should also be subject to SAE J576.
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_201002
  • Historical
Published 2010-02-15 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic material or materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.
This content contains downloadable datasets
Annotation ability available
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J1647_200709
  • Historical
Published 2007-09-20 by SAE International in United States

This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic optical materials for possible use in discharge forward lighting (DFL) devices in motor vehicles. These materials are typically used for lenses and reflectors.

   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_200701
  • Historical
Published 2007-01-17 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Materials and Coatings for Use in Or on Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J1647_199503
  • Historical
Published 1995-03-01 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic optical materials for possible use in discharge forward lighting (DFL) devices in motor vehicles. These materials are typically used for lenses and reflectors. Separate testing is required for each combination of material, industrial coating, DFL light source, and device focal length. The tests are intended to determine physical and optical characteristics of the materials and coatings. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Optical components exposed to weathering should also be subject to SAE J576.
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_198609
  • Historical
Published 1986-09-01 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_198111
  • Historical
Published 1981-11-01 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.
   This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices

Lighting Materials Standards Committee
  • Ground Vehicle Standard
  • J576_198106
  • Historical
Published 1981-06-01 by SAE International in United States
This SAE Recommended Practice provides test methods and requirements to evaluate the suitability of plastic materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Field experience has shown that plastic materials meeting the requirements of this document and molded in accordance with good molding practices will produce durable lighting devices.