Your Selections

TEMSFCCS1
Show Only

Collections

File Formats

Content Types

Dates

Sectors

Topics

Publishers

Committees

Committee Codes

Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J1298_201704
  • Current
Published 2017-04-14 by SAE International in United States
SAE J1298 covers the recommended diagnostic port sizes for use in measuring hydraulic fluid temperature, pressure, flow, and for obtaining fluid samples. See SAE J1502 for the detailed coupling specifications.

Flares for Tubing

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J533_201702
  • Current
Published 2017-02-08 by SAE International in United States
This SAE Standard covers specifications and performance requirements for 37° and 45° single and double flares for tube ends intended for use with SAE J512, SAE J513, SAE J514, and ISO 8434-2 connectors. The flares described in this document are intended for use with SAE metallic tube materials. Considerations such as the effects of wall thickness selection for specific working pressures, identifying appropriate length of thread engagements for specific applications with mating connectors and other associated criteria, shall be the responsibility of the user. For applicable nominal reference working pressures for hydraulic tubing, see SAE J1065 and ISO 10763. In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market, it is the intent of this document to promote the use of metric tube and connector sizes which will: lead to one global system; guide users to a preferred system; reduce complexity; eliminate inventory duplications.
Datasets icon
Annotation icon

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J2337/2_201702
  • Current
Published 2017-02-08 by SAE International in United States
This part of SAE J2337 specifies dimensions, design, and performance requirements for eight connectors using a conical seal to insure leak proof performance with a design factor of 4 to 1.
Datasets icon
Annotation icon

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J2337/3_201701
  • Current
Published 2017-01-04 by SAE International in United States
This part of SAE J2337 specifies dimensions, design, and performance requirements for eight plugs using a conical seal to insure leak proof performance with a design factor of 4 to 1.
Datasets icon
Annotation icon

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J1926/2_201609
  • Current
Published 2016-09-09 by SAE International in United States
This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable heavy-duty (S series) stud ends with ASME B1.1 threads for use in fluid power and general applications and the O-rings used with them that are currently not listed in SAE J515. Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 41.3 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications. Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance…
Datasets icon
Annotation icon

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L-Series) Stud Ends

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J1926/3_201609
  • Current
Published 2016-09-09 by SAE International in United States
This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable light-duty (L series) stud ends with ASME B1.1 threads for use in fluid power and general applications and the O-rings used with them. Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 35 MPa for nonadjustable and adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud end specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications. Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating. Appendices A and B of this document are informative.
Datasets icon
Annotation icon

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J1926/1_201609
  • Current
Published 2016-09-09 by SAE International in United States
This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends shown in SAE J1926-2 and SAE J1926-3. Ports in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 40 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc. For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new designs in hydraulic fluid power applications.
Datasets icon
Annotation icon

Connections for General Use and Fluid Power - Test Methods-Threadless Connections

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J2682_201608
  • Current
Published 2016-08-31 by SAE International in United States
This SAE standard specifies uniform methods for the testing of threadless connections for hydraulic fluid power applications. These connections are intended for general application and hydraulic systems on industrial equipment and commercial products. These connections shall be capable of providing leak proof connections in hydraulic systems operating from 95 kPa vacuum to working pressures specified by the manufacturer. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met.
Datasets icon
Annotation icon

Specification for O-Ring Materials Used with Hydraulic Connectors

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J515_201511
  • Current
Published 2015-11-24 by SAE International in United States
SAE J515 covers the specification for hydraulic O-ring material and properties and sizes applicable to face seal fittings, metric and inch stud ends, and four-bolt flange fittings. The standard includes a size code to allow industry and government agencies to order O-ring with a coded part number.
Datasets icon
Annotation icon

Lubrication Fittings

Hydraulic Tube Fittings Committee
  • Ground Vehicle Standard
  • J534_201508
  • Current
Published 2015-08-11 by SAE International in United States
No Abstract Available.
Datasets icon
Annotation icon