This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
- Ground Vehicle Standard
- J343_201008
- Revised
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard gives methods for testing and evaluating performance of the SAE 100R series of hydraulic hose and hose assemblies (hose and attached end fittings) used in hydraulic fluid power systems.
Specific tests and performance criteria for evaluating hose assemblies used in hydraulic service are in accordance with the requirements for hose in the respective specifications of SAE J517.
This document further establishes a uniform means of testing and evaluating performance of hydraulic hose assemblies.
Rationale
SAE J343 was previously balloted as is for a 5 year review. Member comments have been added as changes herein and/or otherwise addressed.
SAE J343 Section 4.10 Ozone Resistance Test specifies that ozone resistance is to be evaluated under 7X magnification. Both ISO 7326 and ASTM D 380 specify an examination at x2 magnification. This ballot changes J343 Section 4.10 to x2 magnification to bring J343 in line with other industry standards.
SAE J343 Section 4.9 Oil Resistance Test, specifies that immersion in ASTM Emergency Standard Practice IRM903 oil. To help clarify this oil, ASTM D5964 is added to Section 2 References.
This document is technically equivalent to ISO 6605 except as noted in the Foreword.
Recommended Content
| Technical Paper | Hose Constructions |
| Technical Paper | Using a Hose Life Prediction Program |
Data Sets - Support Documents
No Datasets Available
Issuing Committee
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
| Number | Title |
|---|---|
| ASTMD380 | This document is not part of the subscrption. |
| ASTMD5964 | This document is not part of the subscrption. |
| ISO3448 | This document is not part of the subscrption. |
| ISO6605 | This document is not part of the subscrption. |
| J517_201612 | Hydraulic Hose |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.