This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Bearings, Plain, (Self-Aligning, Sleeve and Thrust) Self-Lubricating, High Speed Oscillation General Specification For
- Aerospace Standard
- AS81819
- Issued
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers the requirements for sliding spherical, sleeve, and thrust self-lubricating bearings which are for use in the ambient temperature range -65°F to +160°F at high cyclic speeds.
Recommended Content
Aerospace Standard | Turbine Flowmeter Fuel Flow Calculations |
Aerospace Standard | SPARK PLUGS, AIRCRAFT ENGINE |
Aerospace Standard | Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling, and Marking |
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.
The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.Reference
Number | Title |
---|---|
FED-QQ-P-416 | This document is not part of the subscrption. |
MIL-A-8243 | This document is not part of the subscrption. |
MIL-B-197 | This document is not part of the subscrption. |
MIL-B-81819/1 | This document is not part of the subscrption. |
MIL-H-5606 | This document is not part of the subscrption. |
MIL-H-83282 | This document is not part of the subscrption. |
MIL-L-7808 | This document is not part of the subscrption. |
MIL-P-116 | This document is not part of the subscrption. |
MIL-STD-105 | This document is not part of the subscrption. |
MIL-STD-129 | This document is not part of the subscrption. |
MIL-T-5624 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.