This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting
- Aerospace Standard
- AS4167C
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) covers 12 point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: (a) Non-distorting usage; (b) Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514; (c) Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Rationale
This Aerospace Standard defines the requirements needed for nondistorting 12 point flare nut crowfoot, combination box and flare nut wrenches, and ratcheting flare nut wrenches.
Recommended Content
Aerospace Standard | Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting |
Aerospace Standard | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, STAINLESS STEEL, METRIC |
Aerospace Standard | FITTING, NIPPLE, FLARED TUBE TO PIPE THREAD, FOR SEAL RING |
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Table 1 | Aluminum mandrel test | |
Table 2 | Tube fitting distortion test | |
Table 3 | Type I and II, Class 1, Style A, B and C, design (a) crowfoot, flare nut (standard duty) | |
Table 4 | Type I and II, Class 1, Style B design (b) crowfoot, flare nut, heavy duty | |
Table 5 | Type I and II, Class 2, Style A, flare nut, double flare nuts | |
Table 6 | Type I and II, Class 2, Style B, flare nut, combination box and flare nut | |
Table 7 | Type I and II, Class 2, Style C, flare nut wrench, combination open end and flare nut | |
Table 8 | Type II, Class 2, Style D, flare nut, single flare nut | |
Table 9 | Type II, Class 2, Style E, flare nut, single, ratcheting flare nut |
Issuing Committee
The SAE EG-1B Aerospace Hand Tool Committee addresses all facets of aerospace hand tools and tool kits in of support equipment-design, maintenance, and in-service experience. It focuses on support equipment and facilities related to gas turbine engine testing, balancing, engine accessory testing, inspection, packaging, handling, and transportability. High performance hand tools for aerospace applications are also addressed by EG-1B. The group is comprised of government, original equipment manufacturers, and users dedicated to creating, preparing and maintaining all relevant specifications, standards and requirements for aerospace propulsion system support equipment.
Reference
Number | Title |
---|---|
AMS4118 | ALUMINUM ALLOY BARS Copper Manganese Magnesium |
AS478 | IDENTIFICATION MARKING OF ITEMS FOR AIRCRAFT POWER PLANTS |
AS4984 | Coating Requirements for Aerospace Hand Tools |
ASMEB107.100 | This document is not part of the subscrption. |
ASMEB107.17 | This document is not part of the subscrption. |
ASMEB107.4 | This document is not part of the subscrption. |
ASMEB46.1 | This document is not part of the subscrption. |
ASTME18 | This document is not part of the subscrption. |
ASTME4 | This document is not part of the subscrption. |
J514 | This document is not part of the subscrption. |
J514_201201 | Hydraulic Tube Fittings |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.