This content is not included in your SAE MOBILUS subscription, or you are not logged in.
BEARING, BALL, AIRFRAME, ANTI-FRICTION, INTERMEDIATE DUTY
- Aerospace Standard
Published July 11, 2012 by SAE International in United States
Downloadable datasets availableAnnotation ability available
IN ORDER TO BRING THE AS27641 DOCUMENT UP TO DATE WITH ALL THE REFERENCE DOCUMENTS, REVISION WAS CREATED. THE CHANGES MADE WERE EDITORIAL AND TO MAKE THE FORMAT THE SAME AS SIMILAR DOCUMENTS WITHIN THE WORKING GROUP. A CODE “E” FOR USE OF ZINC-NICKEL PLATING WAS IMPLEMENTED. THE ADDITION OF SPECIFYING TYPE I FOR MIL-PRF-23827 GREASE AND THE ADDITION OF THE CADMIUM NOTE WAS ALSO ADDED. SEAL MATERIAL POLYTETRAFLUOROETHYLENE SHEET PER AMS3666 WAS REMOVED.
|Aerospace Standard||BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY|
|Aerospace Standard||BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY|
Data Sets - Support Documents
|TABLE 1||DIMENSIONS AND LOADS|
|Unnamed Dataset 2|
|Unnamed Dataset 3|
ACBG Rolling Element Bearing Committee
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.
|AMS2417||NICKEL-ZINC ALLOY PLATING|
|AMS6444||STEEL, PREMIUM BEARING QUALITY 1.45Cr (0.95 - 1.10C) (SAE 52100) Consumable Electrode Vacuum Melted|
|AMSQQP416||Plating, Cadmium (Electrodeposited)|
|ANSI/ASME/B46.1||This document is not part of the subscrption.|
|MIL-PRF-23827||This document is not part of the subscrption.|
|MIL-PRF-81322||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.