This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Air and Air/Surface (Platform) Cargo Pallet Nets
- Aerospace Standard
- AS1131C
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
This document establishes five sizes of basic pallet nets as follows:
-
a
Size F (10 ft) (NAS 3610-2F1N): To restrain a 2.44 mm × 2.99 m × 3 m (96 in × 117.75 in × 118 in) high (max) load
-
b
Size R (16 ft) (NAS 3610-2R1N): To restrain a 2.44 m × 4.98 m × 3 m (96 in × 196 in × 118 in) high (max) load
-
c
Size G (20 ft) (NAS 3610-2G1N): To restrain a 2.44 m × 6.06 m × 3 m (96 in × 238.5 in × 118 in) high (max) load
-
d
Size H (30 ft) (NAS 3610-2H1N): To restrain a 2.44 m × 9.12 m × 3 m (96 in × 359.25 in × 118 in) high (max) load
-
e
Size J (40 ft) (NAS 3610-2J1N): To restrain a 2.44 m × 12.19 m × 3 m (96 in × 480 in × 118 in) high (max) load
Rationale
AS1131C has been reaffirmed to comply with the SAE five-year review policy.
Recommended Content
Aerospace Standard | Air Cargo Pallets and Nets Compatibility |
Ground Vehicle Standard | Occupant Restraint System for Off-Road Work Machines |
Aerospace Standard | Air Cargo Unit Load Devices – Load Distribution Model |
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
TABLE 1 |
Issuing Committee
Committee AGE-2 reports to the Aerospace General Projects Division. The main, or governing committee, AGE-2, is composed of the most experienced members, mainly from the airlines, airframe manufacturers, and support equipment manufacturers, to provide leadership and guidance for the Membership to implement the work is drawn with reasonable balance from airlines, airframe manufacturers, support equipment manufacturers, and others with special aircraft related expertise. Members serve based on their knowledge, expertise, and experience and not as agents or representatives of any organization.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.