This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved
- Aerospace Material Specification
- AMS4944L
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers a titanium alloy in the form of seamless tubing.
Rationale
AMS4944L deletes AS6279 that does not apply to hydraulic tubing. AMS4944K resulted from an update of this specification and included a reduction in hydrogen content and removal of an increased sample weight allowance (Table 1), use of vacuum in the first consumable melting (3.2), use of vacuum/inert gas furnaces (3.3.2), revision of tubing size in tolerance Table 4, included the addition of AS6279 (3.7) (now deleted), reduced flarability sampling (4.3.3) and revised reporting (4.5).
Recommended Content
| Aerospace Material Specification | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
| Aerospace Material Specification | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved |
| Aerospace Material Specification | Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| [Unnamed Dataset 1] | ||
| [Unnamed Dataset 2] | ||
| Table 1 | Composition | |
| Table 2 | Minimum tensile properties | |
| Table 3 | Flattening parameters | |
| Table 4A | Tolerances, outer diameter, inch/pound units | |
| Table 4B | Tolerances, outer diameter, SI units |
Issuing Committee
AMS G Titanium and Refractory Metals Committee
The committee of Titanium, Beryllium, and Refractory Materials, AMS Committee G, is responsible for preparation, revision, review and approval of documents related to aerospace application of these materials. Included are titanium, beryllium, and refractory metallic such as molybdenum, tantalum, and columbium. The committee provides a forum for interchange of experience and ideas among industry representatives, both suppliers and users, along with interested government agencies, to ensure the utility, proper technical content, and industry acceptance of published documents.
Reference
| Number | Title |
|---|---|
| AMS2244C | Tolerances Titanium and Titanium Alloy Tubing |
| AMS2249J | Chemical Check Analysis Limits Titanium and Titanium Alloys |
| AMS2634B | Ultrasonic Inspection Thin Wall Metal Tubing |
| AMS2750F | Pyrometry |
| AMS2809A | Identification Titanium and Titanium Alloy Wrought Products |
| AS33611 | TUBE BEND RADII |
| ASMEB46.1 | This document is not part of the subscrption. |
| ASTME1409 | This document is not part of the subscrption. |
| ASTME1447 | This document is not part of the subscrption. |
| ASTME1941 | This document is not part of the subscrption. |
| ASTME2371 | This document is not part of the subscrption. |
| ASTME8 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.