This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE-HEX HEAD, DRILLED, PD SHANK, LONG THREAD, AMS 5662, METRIC
- Aerospace Standard
- MA3369
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
MA3369 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
-
1
FOR PART NUMBERS WHERE DIMENSION N IS EQUAL TO OR LESS THAN ONE TIMES THE NOMINAL DIAMETER OF THE THREAD, THE THREAD PD SHALL REPLACE DATUM B .
-
2
MATERIAL: CORROSION AND HEAT RESISTANT NICKEL ALLOY, AMS 5662 (UNS NO7718).
-
3
PROCUREMENT SPECIFICATION: MA3377.
-
4
HARDNESS: 40-46 HRC OR EQUIVALENT.
-
5
FLOURESCENT PENETRANT INSPECTION: AMS 2645.
-
6
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978; REQUIREMENTS PER ANSI B46.1-1978. UNLESS OTHERWISE SPECIFIED SURFACES TO BE 3.2 MICROMETERS Ra MAX.
-
7
PART NUMBER SHALL INCLUDE THE STANDARD NUMBER AND THE DASH NUMBER TO INDICATE DIAMETER AND LENGTH. EXAMPLE OF PART NUMBER:
MA3369-030014 = BOLT, MJ3x0.5 THREAD, 14 LONG. MA3369-200114 = BOLT, MJ20x1.5 THREAD, 114 LONG. -
8
MARK PART NUMBER AND MANUFACTURER'S IDENTIFICATION PER AS478 CLASS A. FOR MJ3, MJ4 AND MJ5 MARK ONLY MA3369 AND MANUFACTURER'S IDENTIFICATION.
-
9
BREAK EDGES 0.1-0.4, UNLESS OTHERWISE SPECIFIED.
-
10
DIMENSIONING AND TOLERANCING: ANSI Y14.5M-1982. TOLERANCE GRADE PER ANSI B4.2-1978.
-
11
ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.
-
12
DO NOT USE UNASSIGNED PART NUMBERS.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| TABLE I | ||
| TABLE I | ||
| TABLE II | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 | ||
| Unnamed Dataset 9 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.