This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07001), METRIC
- Aerospace Standard
- MA3348A
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
FIGURE 1 REDRAWN, DELETE INSIDE FILET RADII AT TRANSITION OF WRENCH ELEMENT AND BASE FLANGE, ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY, REVISE FPI REFERENCE, TABLES RETYPED AND REFORMATTED, GENERAL EDITORIAL REVISIONS.
Recommended Content
Aerospace Material Specification | Titanium Alloy, Powder 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality |
Aerospace Material Specification | Silver Alloy, Brazing Filler Metal 60Ag - 30Cu - 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range |
Aerospace Material Specification | Nickel Alloy, Corrosion- and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Heat Treatable |
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1A | PART NUMBERS, NOM DIA, THREAD T, AND DIMENSIONS C, D, E, F, G, H, AND K | |
TABLE 1B | PART NUMBERS AND DIMENSIONS R, Y, AB, AC AND WRENCHING DASH NO. | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) | |
TABLE 2 | DASH NO., DIMENSIONS L, M, N, AND APPROX MASS (CONTINUED) |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.