This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
- Aerospace Standard
- MA3289A
- Reaf. Nonc.
Sector:
Issuing Committee:
Language:
English
Rationale
THIS DOCUMENT HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE 5-YEAR REVIEW POLICY.
-
1
FOR PART NUMBERS WHERE DIMENSION N IS EQUAL TO OR LESS THAN ONE TIMES THE NOMINAL DIAMETER OF THE THREAD, THE THREAD PD SHALL REPLACE DATUM B.
-
2
MATERIAL: ALLOY STEEL PER AMS 6322. (G87400)
-
3
PROCUREMENT SPECIFICATION: MA3376
-
4
HARDNESS: 26-32 HRC OR EQUIVALENT.
-
5
MAGNETIC PARTICLE INSPECTION: AMS 2640. ACCEPTANCE CRITERIA PER MA3376.
-
6
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978; REQUIREMENTS PER ANSI B46.1-1985. UNLESS OTHERWISE SPECIFIED SURFACES TO BE 3.2 MICROMETERS Ra.
-
7
PART NUMBER SHALL INCLUDE THE STANDARD NUMBER AND THE DASH NUMBER TO INDICATE DIAMETER AND LENGTH. EXAMPLE OF PART NUMBER:
-
8
MARK PART NUMBER AND MANUFACTURER’S IDENTIFICATION PER AS 478 CLASS A. FOR MJ3 AND MJ4 MARK ONLY MA3289 AND MANUFACTURERS IDENTIFICATION.
-
9
BREAK EDGES 0.1-0.4, UNLESS OTHERWISE SPECIFIED.
-
10
DIMENSIONING AND TOLERANCING: ANSI Y14.5M-1982. TOLERANCE GRADE PER ANSI B4.2-1978.
-
11
ALL DIMENSIONS IN MILLIMETERS
-
12
DO NOT USE UNASSIGNED PART NUMBERS.
-
13
FINISH: CADMIUM PLATE PER AMS 2400. DIMENSIONS ARE AFTER PLATING.
-
14
AFTER OCTOBER 1996 PARTS ARE CADMIUM PLATED.
-
MA, AS AND AMS ARE SAE PUBLICATIONS.
-
ANSI IS AMERICAN NATIONAL STANDARDS INSTITUTE PUBLICATION.
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
Number | Title |
---|---|
AMS2400 | PLATING, CADMIUM |
AMS2640 | Magnetic Particle Inspection |
AMS6322 | STEEL .5 Ni .5 Cr .25 Mo (.38 - .43 C) |
ANSI/ASME/B46.1 | This document is not part of the subscrption. |
ANSI/B4.2 | This document is not part of the subscrption. |
ANSI/Y14.36 | This document is not part of the subscrption. |
ANSI/Y14.5M | This document is not part of the subscrption. |
AS478 | IDENTIFICATION MARKING OF ITEMS FOR AIRCRAFT POWER PLANTS |
AS478J | IDENTIFICATION MARKING METHODS |
MA1370 | Screw Threads - MJ Profile, Metric |
MA3376 | BOLTS & SCREWS, SAE 8740 HEAT TREATED, ROLL THREADED PROCUREMENT SPECIFICATION FOR, METRIC |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.