An enormous economic loss, as well as a waste of natural resources, is incurred world-wide as a result of wear of components and tools. Any effort expended in an attempt to reduce this loss is indeed worthwhile. The purpose of this SAE Information Report is to present the current state of knowledge of abrasive wear. This report, therefore, covers wear, or the undesired removal of metal by mechanical action, caused by abrasive particles in contact with the surface. It does not concern metal-to-metal wear or wear in the presence of an abrasive free lubricant.
Abrasive wear occurs when hard particles, such as rocks, sand, or fragments of certain hard metals, slide or roll under pressure across a surface. This action tends to cut grooves across the metal surface, much like a cutting tool.
Abrasive wear is of considerable importance in any part moving in relation to an abrasive. Tools in contact with the ground, such as plows, cultivators, scraper and bulldozer blades, are intended to operate in abrasives. Machines for processing ores such as crushers and for grinding of natural minerals such as ball mills are also subjected to abrasive wear. Contact with abrasives by many other machinery components may not be a normal circumstance, but, since it may inadvertently occur, must be considered.
Increased hardness usually increases wear resistance but also increases brittleness, which can cause fracture of the tool in rocky soils. Thus, the selection of a suitable material for use in a variety of abrasive conditions is necessarily a compromise between wear and brittle fracture resistance.
This report presents present day information on the fundamentals, testing methods and specific solutions for abrasive wear problems. The limited information reflects the current lack of knowledge on this subject. However, it is a starting point. Further work is necessary to develop general design information.
The Metals Technical Committee (MTC) controls specifications for Ferrous and Non-Ferrous: Metallic Wrought Products, Cast & Sintered Products, Metal Properties & Processes, and Metal Test Procedures. The MTC oversees standards to establish uniform procedures that: 1) establish a common language for the industry to review materials and processes through standards, 2) are reviewed and updated on a regular 5-year basis with coordination to other industry specifications, and 3) creates a common industry interface for technical discussions. The MTC ensures that all standards are developed with qualified personnel to perform respective tasks, meets at least once a year to provide relevant updates to current specifications, and assesses whether new standards are needed by industry. The committee also maintains the public web pages by reviewing and updating the information necessary. The MTC shall report to the Materials Processes and Parts Council (MPPC) on a biannual basis. Participants in the SAE Metals Technical Committee include representatives from OEMs, suppliers, consulting firms, government, and other interested parties.
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.
View/Annotate
Content Loading, Please Wait
Document Preview
Content Loading, Please Wait
Document Comparison
Content Loading, Please Wait
Download
A list of downloadable items.
Product Code
Document Title
File Type
Download
J965_196608
ABRASIVE WEAR
Export Metadata
This modal will allow the user to download citation information or export specific fields of data into one of three file formats: Excel, comma-separated values, or text.
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Redline Warning
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Data Set Warning
ABRASIVE WEAR
SAE Journal Subscriptions are available in a variety of options, which include electronic, electronic with back file, and archive. For detailed information and options, please complete the following:
Content Request
Check My Access!
You may already have access to the Ground Vehicle Standard, ABRASIVE WEAR
Subscription Access
If you have Subscription Access with a username and password, please login below.
Institutional Login
If you have Institutional Access to SAE MOBILUS, using a predetermined organizational login utilizing single-sign-on (Shibboleth), please login below. To request institutional access to SAE MOBILUS, please complete the institutional subscription information form.
Purchase
If you do not have access to SAE MOBILUS via username/password or institutional access, you can still purchase the Ground Vehicle Standard, ABRASIVE WEAR.
Search Tips: Search Operators:AND, OR, NOT; Wild Cards; Using Quotes
SAE MOBILUS® Search Tips
Please note: All terms not contained within quotes, will be evaluated using the OR operator. This means that your search results will contain all results that contain ANY of the entered terms.
AND, OR, NOT
SAE MOBILUS supports the use of the AND, OR and NOT BOOLEAN operators ONLY function with the Advanced Search.
Wild Cards
Using the asterisk, ( * ) allows you to search for a partial word. For example, entering a keyword search of aero* will search for any word beginning with aero.
Using the question mark, ( ? ) allows you to search for a word with a single character wildcard. For example, searching for t?re would match both tire and tyre
Using Quotes
Words in double quotes " " are treated as a phrase. Conducting a search for "heat model" will return all results in which the exact phrase "heat model" is found, while "heat modeling" would NOT be included.
A term combined with a phrase will be joined with an OR operator.
Searching for Standards
When searching for a standard please use the entire Document Number assigned, which includes the abbreviation. A space can be used, or omitted between the abbreviation and number.