This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
HYDRAULIC TUBE FITTINGS
- Ground Vehicle Standard
- J514F_197303
- Revised
Sector:
Issuing Committee:
Language:
English
Scope
This standard covers complete general and dimensional specifications for 37 deg flared and flareless types of hydraulic tube fittings and the O-ring bosses and related components with which they assemble. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.
The 37 deg flared tube fittings shall be as shown in Figs. 5-18 and Tables 3-6. Since the basic design of these fittings is derived from Air Force and Navy Standards for 37 deg flared fittings which meet a performance specification, any future changes should not be detrimental to the design or performance. Dimensions for double and single 37 deg flares on tubing to be used with these fittings are given in Fig. 3 and Table 2 of SAE J533.
The flareless tube fittings shall be as shown in Figs. 19-32 and Tables 7-10. The basic design of these fittings is derived from existing military standards.
Specifications for straight thread O-ring bosses into which connector and adjustable styles of hydraulic tube fittings assemble are given in Fig. 34 and Table 12. O-ring boss plugs shall be as shown in Fig. 35 and Table 13. Modification of hexagon chamfers on standard fittings when used in MS 33649 (or superseded AND 10050) type O-ring bosses is covered in Fig. 33 and Table 11. For specifications of O-rings used in conjunction with these fittings, see SAE J515.
Also included as Appendix A are tables and instructions which may be used for determining the overall lengths, leg lengths, and stock sizes applicable to special size combination fittings not covered in the standard dimensional tabulations.
The following general specifications supplement the dimensional data contained in Tables 3-13 with respect to all unspecified detail.
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
Hydraulic Tube Fittings Committee
The Hydraulic Tube Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic and pneumatic tube fittings for all fluid power applications except hydraulic and pneumatic brake applications Participants in the FCCTC Hydraulic Tube Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
Number | Title |
---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.