This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SAE NUMBERING SYSTEM FOR WROUGHT OR ROLLED STEEL
- Ground Vehicle Standard
- J402_199705
- Revised
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard is intended to supply a uniform means of designating wrought ferrous materials reported in SAE Standards and Recommended Practices.
A numerical index system is used to identify the compositions of the SAE steels. This system makes it possible to use numbers on shop drawings and blueprints to describe partially the composition of the material. A four-numeral series is usually used to designate standard alloy and carbon steels specified to chemical composition ranges. There are certain types of alloy steels which are designated by five numerals. The prefix E is used to designate steels which are made by the basic electric furnace process with special practices. The suffix H is used to designate standard hardenability steels. The last two digits of the four-numeral series and the last three digits of the five-numeral series are intended to indicate the approximate mean of the carbon range. For example, in the Grade 1035, 35 represents a carbon range of 0.32 to 0.38% and in Grade E52100, 100 represents a carbon range of 0.98 to 1.10%. It is necessary, however, to deviate from this system and to interpolate numbers in the case of some carbon ranges, and for variations in manganese, sulfur, or other elements with the same carbon range. The first two digits of the SAE numeral series for the various grades of alloy and carbon steel are given in Table 1.
The Unified Numbering System (UNS) is described in greater detail in SAE J1086 and ASTM E 527.
The basic numerals of the various types of standard and formerly standard SAE steels are given in Table 1.
Recommended Content
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
Carbon and Alloy Steels Committee
The Carbon and Alloy Steels Committee of MTEC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to Carbon and Alloy Steels. Participants in the Carbon and Alloy Steels Committee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
Number | Title |
---|---|
ASTM DS 56 H | This document is not part of the subscrption. |
ASTME527 | This document is not part of the subscrption. |
HS-1086 | This document is not part of the subscrption. |
HS-1086/97 | This document is not part of the subscrption. |
J1081_202306 | Potential Standard Steels |
J1086 | This document is not part of the subscrption. |
J1086_201210 | Numbering Metals and Alloys |
J1249_202403 | Former SAE Standard and Former SAE Ex-Steels |
J1268 | This document is not part of the subscrption. |
J1868 | This document is not part of the subscrption. |
J403_201406 | Chemical Compositions of SAE Carbon Steels |
J404 | This document is not part of the subscrption. |
J405_201801 | Chemical Compositions of SAE Wrought Stainless Steels |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.