SAE J3078/2 specifies two uniform test methods to determine performance levels for fresh and recirculation air filters used in operator enclosures with an air ventilation system. It is not applicable for testing vapor and gas filters. The category of machines covered include off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.
Rationale
This SAE filter test standard provides two uniform test methods, one for filters classified for general use and one for use when classification for more efficient filtration is required.
ISO 11155-1 and ISO 29463 are fractional efficiency test methods which address a wide variety of filter media types, filter shapes, efficiency requirements, and airflow ranges that are utilized in modern operator enclosures.
Tests were performed to determine a correlation between the ISO 5011 gravimetric test method (the testing method used by SAE J1533) and the ISO 11155-1 fractional efficiency test method. Filters with an efficiency ≥96%, under ISO 5011, were tested under ISO 11155-1. They were found to be approximately 92 to 98% efficient on particles from 5.50 to 10 µm in size. ISO 11155-1 tests for filtration efficiency using a fractional efficiency test method; however, it does not produce a filter classification.
ISO 29463 is to be applied when specifications require high efficiency filtration. Specification for filtration efficiency shall be correlated to the appropriate classification as found in ISO 29463-1:2017 Section 5, for example: ISO 15 E, ISO 20 E, ISO 25 E, ISO 35 H. This document will replace SAE J1533.
HFTC6, Operator Accommodations Committee reports to the Human Factors Technical Committee (HFTC) and is part of the Construction, Agriculture, and Off-Road Machinery (ConAg) Council. HFTC6 is dedicated to creating, preparing and maintaining relevant specification, standards and requirements relating to Operator Accommodations including Heating, Ventilation, Air-conditioning and Defrost. The category of machines covered include Off-Road Self-Propelled Work Machines as defined in SAE J1116 and may include Tractors and Machinery for Agriculture and Forestry as defined in ANSI/ASAE S390. Participants in HFTC6 committee are acting as individuals currently involved in the construction, agricultural and related industries through OEMs, suppliers, consulting firms, government and other organizations.
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.
View/Annotate
Content Loading, Please Wait
Document Preview
Content Loading, Please Wait
Document Comparison
Content Loading, Please Wait
Download
A list of downloadable items.
Product Code
Document Title
File Type
Download
J3078/2_202104
Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 2: Air Filter Element Test Method
Export Metadata
This modal will allow the user to download citation information or export specific fields of data into one of three file formats: Excel, comma-separated values, or text.
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Redline Warning
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Data Set Warning
Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 2: Air Filter Element Test Method
SAE Journal Subscriptions are available in a variety of options, which include electronic, electronic with back file, and archive. For detailed information and options, please complete the following:
Content Request
Check My Access!
You may already have access to the Ground Vehicle Standard, Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 2: Air Filter Element Test Method
Subscription Access
If you have Subscription Access with a username and password, please login below.
Institutional Login
If you have Institutional Access to SAE MOBILUS, using a predetermined organizational login utilizing single-sign-on (Shibboleth), please login below. To request institutional access to SAE MOBILUS, please complete the institutional subscription information form.
Purchase
If you do not have access to SAE MOBILUS via username/password or institutional access, you can still purchase the Ground Vehicle Standard, Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 2: Air Filter Element Test Method.
Search Tips: Search Operators:AND, OR, NOT; Wild Cards; Using Quotes
SAE MOBILUS® Search Tips
Please note: All terms not contained within quotes, will be evaluated using the OR operator. This means that your search results will contain all results that contain ANY of the entered terms.
AND, OR, NOT
SAE MOBILUS supports the use of the AND, OR and NOT BOOLEAN operators ONLY function with the Advanced Search.
Wild Cards
Using the asterisk, ( * ) allows you to search for a partial word. For example, entering a keyword search of aero* will search for any word beginning with aero.
Using the question mark, ( ? ) allows you to search for a word with a single character wildcard. For example, searching for t?re would match both tire and tyre
Using Quotes
Words in double quotes " " are treated as a phrase. Conducting a search for "heat model" will return all results in which the exact phrase "heat model" is found, while "heat modeling" would NOT be included.
A term combined with a phrase will be joined with an OR operator.
Searching for Standards
When searching for a standard please use the entire Document Number assigned, which includes the abbreviation. A space can be used, or omitted between the abbreviation and number.