This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Registration and Conformity Assessment Process for Passenger Cars and Light Trucks Wheels
- Ground Vehicle Standard
- J3010_201508
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
The SAE J2530 provides performance, sampling, test procedures, and marking requirements for wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicle. This Recommended Practice (which is separate from SAE J2530) specifies the workflow of the Wheel Conformity Assessment Program. This program allows wheel manufacturers to register their product compliant to SAE J3010. The following items precede display of “SAE J3010” on any particular wheel design:
-
a
Manufacturer registrationAll manufactures with the objective to pursue registration, shall complete the registration as an individual manufacturer via the registrar’s website http://wheeldb.registrar.domain. The registration includes company contact information, wheels produced, and company identification marks.
-
b
Wheel design certificationAll wheel designs intended for certification in accordance to this Recommended Practice, shall complete the application and submittal of test results via the above stated registrar website and in accordance to the procedures herewith.
-
c
Use of SAE J3010Upon completion of the conformity assessment process, the Program Manager will post the image, identification, and conformity report of the wheel design on the corresponding website. Use of the “SAE J3010” mark in any form is restricted only to wheels noted in the online version of the Comprehensive Wheel Registry (REG-CWR).
-
d
Wheel test facility or laboratory accreditation registrationAll facilities or laboratories (first-, second-, or third-party) intended for wheel testing under the subject conformity assessment process, shall complete the application and submittal of test results via the above stated registrar website and in accordance to the procedures herewith. Accreditation from the registrar is required before providing valid test reports as part of this conformity assessment program.Manufacturers of wheels for passenger cars and light trucks, who advertise their products as "Conforms to SAE J3010" and label their product with the "SAE J3010" mark, shall follow these procedures. Conformity assessment of products to SAE J3010 is voluntary; however, adherence to these procedures is mandatory for those advertising their products as “Conforming to SAE J3010.” Wheel designs using the “SAE J3010” mark meet the requirements of SAE J2530.This conformity assessment program does not include other parameters like inner profile of the wheel and fitment to the brake or vehicle suspension, ventilation hole cooling efficiency, wheel attachment or length of thread engagement, etc., which are necessary for complete fitment and suitability to vehicles.
Rationale
This Recommended Practice provides an industry-approved and peer-reviewed document pertaining to the proper processes to (1) become a registered wheel supplier, (2) become an approved testing facility or laboratory, and (3) obtain and maintain a declaration of conformity (or conformity assessment) for a wheel design when testing per SAE J2530.
This Recommended Practice provides an efficient, competently conducted, market-oriented conformity assessment using common requirements. It also makes requirements and procedures open and transparent to all applicants with equal treatment, establishes the guidelines to make the process prompt and efficient, and ensures accurate and timely status on a given wheel regarding its conformity assessment. Lastly, it undertakes reasonable surveillance procedures to ensure continued conformity of the product to the herein stated requirements (See ANSI NCAP).
The process and main elements of this conformity assessment program use the main elements of product certification and statistical methods used across the industry and well documented on several ISO guides and standards. The systematic surveillance activities are the basis for maintaining the validity of the statement of certification (see ISO 17000). This SAE Recommended Practice is intended as a guide towards standard practices and is subject to change to keep pace with experience and technical advances.
Recommended Content
| Ground Vehicle Standard | Registration and Conformity Assessment Process for Passenger Cars and Light Trucks Wheels |
| Ground Vehicle Standard | Fatigue Test Procedures: Hubs and Wheels for Demountable Rims |
| Technical Paper | Braking Capability Requirements for In-Use Commercial Vehicles - A Chronology |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 |
Issuing Committee
The SAE Wheel Standards Committee develops standards for passenger cars and light trucks which address three or more of the following: Reduce costs, Harmonize global markets, Facilitate trade through reduced regulation, Enhance safety, Improve environment, Increase productivity of processes, Allow uniform testing or performance, Create common language, Permit common interfaces.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.