This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Qualified Hoses for Marine Applications
- Ground Vehicle Standard
Published December 17, 2015 by SAE International in United States
Downloadable datasets availableAnnotation ability available
Effective August 28, 1991, the SAE replaced the USCG as the listing agency for Marine Hose Assemblies. The previous USCG list was discontinued as of December 31, 1992, and is being replaced by this SAE listing, J1942-1.
All products appearing on the USCG list as of December 31, 1992, may be carried over to the SAE J1942-1 provided they meet the new test requirements listed in SAE J1942.
If your products comply, you may retain your listings with no additional testing. (Please note that the USCG has the authority to request and inspect your test results at their discretion).
The following list consists of hose data provided as of December 2015, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document.
Manufacturers wishing to list their products in this document shall:
Successfully test their hose to the requirements of SAE J1942, Table 1.
Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested (see sample table on page 4) along with the test results. All sizes should be included in the same letter which must also include all of the information necessary to make a SAE J1942-1 listing.
The SAE will review the letter and may, at their discretion, request to see further test results. A copy of the submittal letter marked “Accepted for Listing” will be returned to the applicant upon approval.
The cutoff date for inclusion of a hose listing in the annual SAE Handbook is September 30, of the preceding year. However, listed hoses may be used on vessels as soon as the “Accepted for Listing” letter is issued by the SAE.
Next publication of this listing is scheduled to take place in December 2016. If you wish to include additional hoses in the 2016 publication of this list, please submit your Certified List to SAE by September 2016.
Several new additions to hose listings and revisions to current hose listings.
Data Sets - Support Documents
|Table 1||Sample listing page|
|Table 2||Alfagomma hydraulic S.p.A listing|
|Table 3||Anchor Coupling Inc. listing|
|Table 4||Dunlop Hyflex listing|
|Table 5||Eaton Aeroquip listing|
|Table 6||Eaton Weatherhead listing|
|Table 7||Eaton Synflex listing|
|Table 8||Flextral Hydraulics|
|Table 9||Gates Rubber Company listing|
|Table 10||Continental ContiTech / Veyance Technologies Inc. listing|
|Table 11||Intertraco (Italia) S.p.A. listing|
|Table 12||Novaflex Group listing|
|Table 13||NRP-Jones listing|
|Table 14||Parker Hannifin Corporation listing|
|Table 15||Parker Parflex listing|
|Table 16||Parker Veniano listing|
|Table 17||Pirtek UK Ltd. listing|
|Table 18||Parker Hannifin India PVT. LTD|
|Table 19||RYCO Hydraulics Inc. listing|
|Table 20||Specma Dunlop Hydraulic AB listing|
|Table 21||Teleflex Fluid Systems listing|
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
|J1942_201406||Hose and Hose Assemblies for Marine Applications|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.